Package com.mongodb

Class ConnectionString

  • public class ConnectionString
extends Object

    Represents a Connection String. The Connection String describes the hosts to be used and options.

    The format of the Connection String is:

       mongodb://[username:password@]host1[:port1][,host2[:port2],...[,hostN[:portN]]][/[database.collection][?options]]
    • mongodb:// is a required prefix to identify that this is a string in the standard connection format.
    • username:password@ are optional. If given, the driver will attempt to login to a database after connecting to a database server. For some authentication mechanisms, only the username is specified and the password is not, in which case the ":" after the username is left off as well
    • host1 is the only required part of the connection string. It identifies a server address to connect to. Support for Unix domain sockets was added in 3.7. Note: The path must be urlencoded eg: mongodb://%2Ftmp%2Fmongodb-27017.sock and the jnr.unixsocket library installed.
    • :portX is optional and defaults to :27017 if not provided.
    • /database is the name of the database to login to and thus is only relevant if the username:password@ syntax is used. If not specified the "admin" database will be used by default.
    • ?options are connection options. Note that if database is absent there is still a / required between the last host and the ? introducing the options. Options are name=value pairs and the pairs are separated by "&". For backwards compatibility, ";" is accepted as a separator in addition to "&", but should be considered as deprecated.

    An alternative format, using the mongodb+srv protocol, is: 

       mongodb+srv://[username:password@]host[/[database][?options]]
    • mongodb+srv:// is a required prefix for this format.
    • username:password@ are optional. If given, the driver will attempt to login to a database after connecting to a database server. For some authentication mechanisms, only the username is specified and the password is not, in which case the ":" after the username is left off as well
    • host is the only required part of the URI. It identifies a single host name for which SRV records are looked up from a Domain Name Server after prefixing the host name with "_mongodb._tcp". The host/port for each SRV record becomes the seed list used to connect, as if each one were provided as host/port pair in a URI using the normal mongodb protocol.
    • /database is the name of the database to login to and thus is only relevant if the username:password@ syntax is used. If not specified the "admin" database will be used by default.
    • ?options are connection options. Note that if database is absent there is still a / required between the last host and the ? introducing the options. Options are name=value pairs and the pairs are separated by "&". For backwards compatibility, ";" is accepted as a separator in addition to "&", but should be considered as deprecated. Additionally with the mongodb+srv protocol, TXT records are looked up from a Domain Name Server for the given host, and the text value of each one is prepended to any options on the URI itself. Because the last specified value for any option wins, that means that options provided on the URI will override any that are provided via TXT records.

    The following options are supported (case insensitive):

    Server Selection Configuration:

    • serverSelectionTimeoutMS=ms: How long the driver will wait for server selection to succeed before throwing an exception.
    • localThresholdMS=ms: When choosing among multiple MongoDB servers to send a request, the driver will only send that request to a server whose ping time is less than or equal to the server with the fastest ping time plus the local threshold.

    Server Monitoring Configuration:

    • heartbeatFrequencyMS=ms: The frequency that the driver will attempt to determine the current state of each server in the cluster.

    Replica set configuration:

    • replicaSet=name: Implies that the hosts given are a seed list, and the driver will attempt to find all members of the set.

    Connection Configuration:

    • ssl=true|false: Whether to connect using TLS.
    • tls=true|false: Whether to connect using TLS. Supersedes the ssl option
    • tlsInsecure=true|false: If connecting with TLS, this option enables insecure TLS connections. Currently this has the same effect of setting tlsAllowInvalidHostnames to true. Other mechanism for relaxing TLS security constraints must be handled in the application by customizing the SSLContext
    • sslInvalidHostNameAllowed=true|false: Whether to allow invalid host names for TLS connections.
    • tlsAllowInvalidHostnames=true|false: Whether to allow invalid host names for TLS connections. Supersedes the sslInvalidHostNameAllowed option
    • connectTimeoutMS=ms: How long a connection can take to be opened before timing out.
    • socketTimeoutMS=ms: How long a send or receive on a socket can take before timing out.
    • maxIdleTimeMS=ms: Maximum idle time of a pooled connection. A connection that exceeds this limit will be closed
    • maxLifeTimeMS=ms: Maximum life time of a pooled connection. A connection that exceeds this limit will be closed
    • streamType=nio2|netty: The stream type to use for connections. If unspecified, nio2 will be used for asynchronous clients. Note that this query parameter has been deprecated and applications should use MongoClientSettings.Builder.streamFactoryFactory(StreamFactoryFactory) instead.

    Connection pool configuration:

    • maxPoolSize=n: The maximum number of connections in the connection pool.
    • waitQueueMultiple=n : this multiplier, multiplied with the maxPoolSize setting, gives the maximum number of threads that may be waiting for a connection to become available from the pool. All further threads will get an exception right away. Note that this configuration option is deprecated and will be removed in the next major release.
    • waitQueueTimeoutMS=ms: The maximum wait time in milliseconds that a thread may wait for a connection to become available.

    Write concern configuration:

    • safe=true|false
      • true: the driver ensures that all writes are acknowledged by the MongoDB server, or else throws an exception. (see also w and wtimeoutMS).
      • false: the driver does not ensure that all writes are acknowledged by the MongoDB server.
    • journal=true|false
      • true: the driver waits for the server to group commit to the journal file on disk.
      • false: the driver does not wait for the server to group commit to the journal file on disk.
    • w=wValue
      • The driver adds { w : wValue } to all write commands. Implies safe=true.
      • wValue is typically a number, but can be any string in order to allow for specifications like "majority"
    • wtimeoutMS=ms
      • The driver adds { wtimeout : ms } to all write commands. Implies safe=true.
      • Used in combination with w

    Read preference configuration:

    • readPreference=enum: The read preference for this connection.
      • Enumerated values:
        • primary
        • primaryPreferred
        • secondary
        • secondaryPreferred
        • nearest
    • readPreferenceTags=string. A representation of a tag set as a comma-separated list of colon-separated key-value pairs, e.g. "dc:ny,rack:1". Spaces are stripped from beginning and end of all keys and values. To specify a list of tag sets, using multiple readPreferenceTags, e.g. readPreferenceTags=dc:ny,rack:1;readPreferenceTags=dc:ny;readPreferenceTags=
      • Note the empty value for the last one, which means match any secondary as a last resort.
      • Order matters when using multiple readPreferenceTags.
    • maxStalenessSeconds=seconds. The maximum staleness in seconds. For use with any non-primary read preference, the driver estimates the staleness of each secondary, based on lastWriteDate values provided in server isMaster responses, and selects only those secondaries whose staleness is less than or equal to maxStalenessSeconds. Not providing the parameter or explicitly setting it to -1 indicates that there should be no max staleness check. The maximum staleness feature is designed to prevent badly-lagging servers from being selected. The staleness estimate is imprecise and shouldn't be used to try to select "up-to-date" secondaries. The minimum value is either 90 seconds, or the heartbeat frequency plus 10 seconds, whichever is greatest.

    Authentication configuration:

    • authMechanism=MONGO-CR|GSSAPI|PLAIN|MONGODB-X509: The authentication mechanism to use if a credential was supplied. The default is unspecified, in which case the client will pick the most secure mechanism available based on the sever version. For the GSSAPI and MONGODB-X509 mechanisms, no password is accepted, only the username.
    • authSource=string: The source of the authentication credentials. This is typically the database that the credentials have been created. The value defaults to the database specified in the path portion of the connection string. If the database is specified in neither place, the default value is "admin". This option is only respected when using the MONGO-CR mechanism (the default).
    • authMechanismProperties=PROPERTY_NAME:PROPERTY_VALUE,PROPERTY_NAME2:PROPERTY_VALUE2: This option allows authentication mechanism properties to be set on the connection string.
    • gssapiServiceName=string: This option only applies to the GSSAPI mechanism and is used to alter the service name. Deprecated, please use authMechanismProperties=SERVICE_NAME:string instead.

    Server Handshake configuration:

    • appName=string: Sets the logical name of the application. The application name may be used by the client to identify the application to the server, for use in server logs, slow query logs, and profile collection.

    Compressor configuration:

    • compressors=string: A comma-separated list of compressors to request from the server. The supported compressors currently are 'zlib', 'snappy' and 'zstd'.
    • zlibCompressionLevel=integer: Integer value from -1 to 9 representing the zlib compression level. Lower values will make compression faster, while higher values will make compression better.

    General configuration:

    • retryWrites=true|false. If true the driver will retry supported write operations if they fail due to a network error. Defaults to true.
    • retryReads=true|false. If true the driver will retry supported read operations if they fail due to a network error. Defaults to true.
    • uuidRepresentation=unspecified|standard|javaLegacy|csharpLegacy|pythonLegacy. See MongoClientSettings.getUuidRepresentation() for documentation of semantics of this parameter. Defaults to "javaLegacy", but will change to "unspecified" in the next major release.
    Since:
    3.0.0
    MongoDB documentation
    Connection String Format

    • Constructor Detail

      • ConnectionString

        public ConnectionString​(String connectionString)
        Creates a ConnectionString from the given string.
        Parameters:
        connectionString - the connection string
        Since:
        3.0

    • Method Detail

      • getUsername

        @Nullable
public String getUsername()
        Gets the username
        Returns:
        the username

      • getPassword

        @Nullable
public char[] getPassword()
        Gets the password
        Returns:
        the password

      • isSrvProtocol

        public boolean isSrvProtocol()
        Returns true if the connection string requires SRV protocol to resolve the host lists from the configured host.
        Returns:
        true if SRV protocol is required to resolve hosts.

      • getHosts

        public List<String> getHosts()
        Gets the list of hosts
        Returns:
        the host list

      • getDatabase

        @Nullable
public String getDatabase()
        Gets the database name
        Returns:
        the database name

      • getCollection

        @Nullable
public String getCollection()
        Gets the collection name
        Returns:
        the collection name

      • getConnectionString

        public String getConnectionString()
        Get the unparsed connection string.
        Returns:
        the connection string
        Since:
        3.1

      • getCredentialList

        @Deprecated
public List<MongoCredential> getCredentialList()
        Deprecated.
        Prefer getCredential()
        Gets the credentials in an immutable list. The list will be empty if no credentials were specified in the connection string.
        Returns:
        the credentials in an immutable list

      • getCredential

        @Nullable
public MongoCredential getCredential()
        Gets the credential or null if no credentials were specified in the connection string.
        Returns:
        the credentials in an immutable list
        Since:
        3.6

      • getReadPreference

        @Nullable
public ReadPreference getReadPreference()
        Gets the read preference specified in the connection string.
        Returns:
        the read preference

      • getReadConcern

        @Nullable
public ReadConcern getReadConcern()
        Gets the read concern specified in the connection string.
        Returns:
        the read concern

      • getWriteConcern

        @Nullable
public WriteConcern getWriteConcern()
        Gets the write concern specified in the connection string.
        Returns:
        the write concern

      • getRetryWrites

        @Deprecated
public boolean getRetryWrites()
        Deprecated.
        Prefer getRetryWritesValue()
        Returns true if writes should be retried if they fail due to a network error, and false otherwise

        Starting with the 3.11.0 release, the default value is true

        Returns:
        the retryWrites value, or true if unset
        Since:
        3.6
        Since server release
        3.6

      • getRetryWritesValue

        public Boolean getRetryWritesValue()

        Gets whether writes should be retried if they fail due to a network error

        The name of this method differs from others in this class so as not to conflict with the deprecated (and soon to be removed) getRetryWrites() method, which returns a primitive boolean value, which doesn't allow callers to differentiate between a false value and an unset value.
        Returns:
        the retryWrites value, or null if unset
        Since:
        3.9
        Since server release
        3.6

      • getRetryReads

        public Boolean getRetryReads()

        Gets whether reads should be retried if they fail due to a network error

        Returns:
        the retryWrites value
        Since:
        3.11
        Since server release
        3.6

      • getMinConnectionPoolSize

        @Nullable
public Integer getMinConnectionPoolSize()
        Gets the minimum connection pool size specified in the connection string.
        Returns:
        the minimum connection pool size

      • getMaxConnectionPoolSize

        @Nullable
public Integer getMaxConnectionPoolSize()
        Gets the maximum connection pool size specified in the connection string.
        Returns:
        the maximum connection pool size

      • getThreadsAllowedToBlockForConnectionMultiplier

        @Deprecated
@Nullable
public Integer getThreadsAllowedToBlockForConnectionMultiplier()
        Deprecated.
        in the next major release, wait queue size limitations will be removed
        Gets the multiplier for the number of threads allowed to block waiting for a connection specified in the connection string.
        Returns:
        the multiplier for the number of threads allowed to block waiting for a connection

      • getMaxWaitTime

        @Nullable
public Integer getMaxWaitTime()
        Gets the maximum wait time of a thread waiting for a connection specified in the connection string.
        Returns:
        the maximum wait time of a thread waiting for a connection

      • getMaxConnectionIdleTime

        @Nullable
public Integer getMaxConnectionIdleTime()
        Gets the maximum connection idle time specified in the connection string.
        Returns:
        the maximum connection idle time

      • getMaxConnectionLifeTime

        @Nullable
public Integer getMaxConnectionLifeTime()
        Gets the maximum connection life time specified in the connection string.
        Returns:
        the maximum connection life time

      • getConnectTimeout

        @Nullable
public Integer getConnectTimeout()
        Gets the socket connect timeout specified in the connection string.
        Returns:
        the socket connect timeout

      • getSocketTimeout

        @Nullable
public Integer getSocketTimeout()
        Gets the socket timeout specified in the connection string.
        Returns:
        the socket timeout

      • getSslEnabled

        @Nullable
public Boolean getSslEnabled()
        Gets the SSL enabled value specified in the connection string.
        Returns:
        the SSL enabled value

      • getSslInvalidHostnameAllowed

        @Nullable
public Boolean getSslInvalidHostnameAllowed()
        Gets the SSL invalidHostnameAllowed value specified in the connection string.
        Returns:
        the SSL invalidHostnameAllowed value
        Since:
        3.3

      • getRequiredReplicaSetName

        @Nullable
public String getRequiredReplicaSetName()
        Gets the required replica set name specified in the connection string.
        Returns:
        the required replica set name

      • getServerSelectionTimeout

        @Nullable
public Integer getServerSelectionTimeout()
        Returns:
        the server selection timeout (in milliseconds), or null if unset
        Since:
        3.3

      • getLocalThreshold

        @Nullable
public Integer getLocalThreshold()
        Returns:
        the local threshold (in milliseconds), or null if unset since 3.3

      • getHeartbeatFrequency

        @Nullable
public Integer getHeartbeatFrequency()
        Returns:
        the heartbeat frequency (in milliseconds), or null if unset since 3.3

      • getApplicationName

        @Nullable
public String getApplicationName()
        Gets the logical name of the application. The application name may be used by the client to identify the application to the server, for use in server logs, slow query logs, and profile collection.

        Default is null.

        Returns:
        the application name, which may be null
        Since:
        3.4
        Since server release
        3.4

      • getCompressorList

        public List<MongoCompressor> getCompressorList()
        Gets the list of compressors.
        Returns:
        the non-null list of compressors
        Since:
        3.6

      • getUuidRepresentation

        @Nullable
public UuidRepresentation getUuidRepresentation()
        Gets the UUID representation.

        Default is null.

        Returns:
        the UUID representation, which may be null if it was unspecified
        Since:
        3.12

      • hashCode

        public int hashCode()
        Overrides:
        hashCode in class Object