Interface MongoCollection<TDocument>

Type Parameters:
TDocument - The type that this collection will encode documents from and decode documents to.

@ThreadSafe public interface MongoCollection<TDocument>
The MongoCollection interface.

Note: Additions to this interface will not be considered to break binary compatibility.

MongoCollection is generic allowing for different types to represent documents. Any custom classes must have a Codec registered in the CodecRegistry.

Since:
3.0
  • Method Details

    • getNamespace

      MongoNamespace getNamespace()
      Gets the namespace of this collection.
      Returns:
      the namespace
    • getDocumentClass

      Class<TDocument> getDocumentClass()
      Get the class of documents stored in this collection.
      Returns:
      the class
    • getCodecRegistry

      CodecRegistry getCodecRegistry()
      Get the codec registry for the MongoCollection.
      Returns:
      the CodecRegistry
    • getReadPreference

      ReadPreference getReadPreference()
      Get the read preference for the MongoCollection.
      Returns:
      the ReadPreference
    • getWriteConcern

      WriteConcern getWriteConcern()
      Get the write concern for the MongoCollection.
      Returns:
      the WriteConcern
    • getReadConcern

      ReadConcern getReadConcern()
      Get the read concern for the MongoCollection.
      Returns:
      the ReadConcern
      Since:
      3.2
      MongoDB documentation
      Read Concern
      Since server release
      3.2
    • withDocumentClass

      <NewTDocument> MongoCollection<NewTDocument> withDocumentClass(Class<NewTDocument> clazz)
      Create a new MongoCollection instance with a different default class to cast any documents returned from the database into..
      Type Parameters:
      NewTDocument - The type that the new collection will encode documents from and decode documents to
      Parameters:
      clazz - the default class to cast any documents returned from the database into.
      Returns:
      a new MongoCollection instance with the different default class
    • withCodecRegistry

      MongoCollection<TDocument> withCodecRegistry(CodecRegistry codecRegistry)
      Create a new MongoCollection instance with a different codec registry.
      Parameters:
      codecRegistry - the new CodecRegistry for the collection
      Returns:
      a new MongoCollection instance with the different codec registry
    • withReadPreference

      MongoCollection<TDocument> withReadPreference(ReadPreference readPreference)
      Create a new MongoCollection instance with a different read preference.
      Parameters:
      readPreference - the new ReadPreference for the collection
      Returns:
      a new MongoCollection instance with the different readPreference
    • withWriteConcern

      MongoCollection<TDocument> withWriteConcern(WriteConcern writeConcern)
      Create a new MongoCollection instance with a different write concern.
      Parameters:
      writeConcern - the new WriteConcern for the collection
      Returns:
      a new MongoCollection instance with the different writeConcern
    • withReadConcern

      MongoCollection<TDocument> withReadConcern(ReadConcern readConcern)
      Create a new MongoCollection instance with a different read concern.
      Parameters:
      readConcern - the new ReadConcern for the collection
      Returns:
      a new MongoCollection instance with the different ReadConcern
      Since:
      3.2
      MongoDB documentation
      Read Concern
      Since server release
      3.2
    • countDocuments

      long countDocuments()
      Counts the number of documents in the collection.

      Note: For a fast count of the total documents in a collection see estimatedDocumentCount(). When migrating from count() to countDocuments() the following query operators must be replaced:

      
        +-------------+--------------------------------+
        | Operator    | Replacement                    |
        +=============+================================+
        | $where      |  $expr                         |
        +-------------+--------------------------------+
        | $near       |  $geoWithin with $center       |
        +-------------+--------------------------------+
        | $nearSphere |  $geoWithin with $centerSphere |
        +-------------+--------------------------------+
       
      Returns:
      the number of documents in the collection
      Since:
      3.8
    • countDocuments

      long countDocuments(Bson filter)
      Counts the number of documents in the collection according to the given options.

      Note: For a fast count of the total documents in a collection see estimatedDocumentCount(). When migrating from count() to countDocuments() the following query operators must be replaced:

      
        +-------------+--------------------------------+
        | Operator    | Replacement                    |
        +=============+================================+
        | $where      |  $expr                         |
        +-------------+--------------------------------+
        | $near       |  $geoWithin with $center       |
        +-------------+--------------------------------+
        | $nearSphere |  $geoWithin with $centerSphere |
        +-------------+--------------------------------+
       
      Parameters:
      filter - the query filter
      Returns:
      the number of documents in the collection
      Since:
      3.8
    • countDocuments

      long countDocuments(Bson filter, CountOptions options)
      Counts the number of documents in the collection according to the given options.

      Note: For a fast count of the total documents in a collection see estimatedDocumentCount(). When migrating from count() to countDocuments() the following query operators must be replaced:

      
        +-------------+--------------------------------+
        | Operator    | Replacement                    |
        +=============+================================+
        | $where      |  $expr                         |
        +-------------+--------------------------------+
        | $near       |  $geoWithin with $center       |
        +-------------+--------------------------------+
        | $nearSphere |  $geoWithin with $centerSphere |
        +-------------+--------------------------------+
       
      Parameters:
      filter - the query filter
      options - the options describing the count
      Returns:
      the number of documents in the collection
      Since:
      3.8
    • countDocuments

      long countDocuments(ClientSession clientSession)
      Counts the number of documents in the collection.

      Note: For a fast count of the total documents in a collection see estimatedDocumentCount(). When migrating from count() to countDocuments() the following query operators must be replaced:

      
        +-------------+--------------------------------+
        | Operator    | Replacement                    |
        +=============+================================+
        | $where      |  $expr                         |
        +-------------+--------------------------------+
        | $near       |  $geoWithin with $center       |
        +-------------+--------------------------------+
        | $nearSphere |  $geoWithin with $centerSphere |
        +-------------+--------------------------------+
       
      Parameters:
      clientSession - the client session with which to associate this operation
      Returns:
      the number of documents in the collection
      Since:
      3.8
      Since server release
      3.6
    • countDocuments

      long countDocuments(ClientSession clientSession, Bson filter)
      Counts the number of documents in the collection according to the given options.

      Note: For a fast count of the total documents in a collection see estimatedDocumentCount(). When migrating from count() to countDocuments() the following query operators must be replaced:

      
        +-------------+--------------------------------+
        | Operator    | Replacement                    |
        +=============+================================+
        | $where      |  $expr                         |
        +-------------+--------------------------------+
        | $near       |  $geoWithin with $center       |
        +-------------+--------------------------------+
        | $nearSphere |  $geoWithin with $centerSphere |
        +-------------+--------------------------------+
       
      Parameters:
      clientSession - the client session with which to associate this operation
      filter - the query filter
      Returns:
      the number of documents in the collection
      Since:
      3.8
      Since server release
      3.6
    • countDocuments

      long countDocuments(ClientSession clientSession, Bson filter, CountOptions options)
      Counts the number of documents in the collection according to the given options.

      Note: For a fast count of the total documents in a collection see estimatedDocumentCount(). When migrating from count() to countDocuments() the following query operators must be replaced:

      
        +-------------+--------------------------------+
        | Operator    | Replacement                    |
        +=============+================================+
        | $where      |  $expr                         |
        +-------------+--------------------------------+
        | $near       |  $geoWithin with $center       |
        +-------------+--------------------------------+
        | $nearSphere |  $geoWithin with $centerSphere |
        +-------------+--------------------------------+
       
      Parameters:
      clientSession - the client session with which to associate this operation
      filter - the query filter
      options - the options describing the count
      Returns:
      the number of documents in the collection
      Since:
      3.8
      Since server release
      3.6
    • estimatedDocumentCount

      long estimatedDocumentCount()
      Gets an estimate of the count of documents in a collection using collection metadata.
      Returns:
      the number of documents in the collection
      Since:
      3.8
    • estimatedDocumentCount

      long estimatedDocumentCount(EstimatedDocumentCountOptions options)
      Gets an estimate of the count of documents in a collection using collection metadata.
      Parameters:
      options - the options describing the count
      Returns:
      the number of documents in the collection
      Since:
      3.8
    • distinct

      <TResult> DistinctIterable<TResult> distinct(String fieldName, Class<TResult> resultClass)
      Gets the distinct values of the specified field name.
      Type Parameters:
      TResult - the target type of the iterable.
      Parameters:
      fieldName - the field name
      resultClass - the class to cast any distinct items into.
      Returns:
      an iterable of distinct values
      MongoDB documentation
      Distinct
    • distinct

      <TResult> DistinctIterable<TResult> distinct(String fieldName, Bson filter, Class<TResult> resultClass)
      Gets the distinct values of the specified field name.
      Type Parameters:
      TResult - the target type of the iterable.
      Parameters:
      fieldName - the field name
      filter - the query filter
      resultClass - the class to cast any distinct items into.
      Returns:
      an iterable of distinct values
      MongoDB documentation
      Distinct
    • distinct

      <TResult> DistinctIterable<TResult> distinct(ClientSession clientSession, String fieldName, Class<TResult> resultClass)
      Gets the distinct values of the specified field name.
      Type Parameters:
      TResult - the target type of the iterable.
      Parameters:
      clientSession - the client session with which to associate this operation
      fieldName - the field name
      resultClass - the class to cast any distinct items into.
      Returns:
      an iterable of distinct values
      Since:
      3.6
      MongoDB documentation
      Distinct
      Since server release
      3.6
    • distinct

      <TResult> DistinctIterable<TResult> distinct(ClientSession clientSession, String fieldName, Bson filter, Class<TResult> resultClass)
      Gets the distinct values of the specified field name.
      Type Parameters:
      TResult - the target type of the iterable.
      Parameters:
      clientSession - the client session with which to associate this operation
      fieldName - the field name
      filter - the query filter
      resultClass - the class to cast any distinct items into.
      Returns:
      an iterable of distinct values
      Since:
      3.6
      MongoDB documentation
      Distinct
      Since server release
      3.6
    • find

      Finds all documents in the collection.
      Returns:
      the find iterable interface
      MongoDB documentation
      Find
    • find

      <TResult> FindIterable<TResult> find(Class<TResult> resultClass)
      Finds all documents in the collection.
      Type Parameters:
      TResult - the target document type of the iterable.
      Parameters:
      resultClass - the class to decode each document into
      Returns:
      the find iterable interface
      MongoDB documentation
      Find
    • find

      FindIterable<TDocument> find(Bson filter)
      Finds all documents in the collection.
      Parameters:
      filter - the query filter
      Returns:
      the find iterable interface
      MongoDB documentation
      Find
    • find

      <TResult> FindIterable<TResult> find(Bson filter, Class<TResult> resultClass)
      Finds all documents in the collection.
      Type Parameters:
      TResult - the target document type of the iterable.
      Parameters:
      filter - the query filter
      resultClass - the class to decode each document into
      Returns:
      the find iterable interface
      MongoDB documentation
      Find
    • find

      FindIterable<TDocument> find(ClientSession clientSession)
      Finds all documents in the collection.
      Parameters:
      clientSession - the client session with which to associate this operation
      Returns:
      the find iterable interface
      Since:
      3.6
      MongoDB documentation
      Find
      Since server release
      3.6
    • find

      <TResult> FindIterable<TResult> find(ClientSession clientSession, Class<TResult> resultClass)
      Finds all documents in the collection.
      Type Parameters:
      TResult - the target document type of the iterable.
      Parameters:
      clientSession - the client session with which to associate this operation
      resultClass - the class to decode each document into
      Returns:
      the find iterable interface
      Since:
      3.6
      MongoDB documentation
      Find
      Since server release
      3.6
    • find

      FindIterable<TDocument> find(ClientSession clientSession, Bson filter)
      Finds all documents in the collection.
      Parameters:
      clientSession - the client session with which to associate this operation
      filter - the query filter
      Returns:
      the find iterable interface
      Since:
      3.6
      MongoDB documentation
      Find
      Since server release
      3.6
    • find

      <TResult> FindIterable<TResult> find(ClientSession clientSession, Bson filter, Class<TResult> resultClass)
      Finds all documents in the collection.
      Type Parameters:
      TResult - the target document type of the iterable.
      Parameters:
      clientSession - the client session with which to associate this operation
      filter - the query filter
      resultClass - the class to decode each document into
      Returns:
      the find iterable interface
      Since:
      3.6
      MongoDB documentation
      Find
      Since server release
      3.6
    • aggregate

      AggregateIterable<TDocument> aggregate(List<? extends Bson> pipeline)
      Aggregates documents according to the specified aggregation pipeline.
      Parameters:
      pipeline - the aggregation pipeline
      Returns:
      an iterable containing the result of the aggregation operation
      MongoDB documentation
      Aggregation
      Since server release
      2.2
    • aggregate

      <TResult> AggregateIterable<TResult> aggregate(List<? extends Bson> pipeline, Class<TResult> resultClass)
      Aggregates documents according to the specified aggregation pipeline.
      Type Parameters:
      TResult - the target document type of the iterable.
      Parameters:
      pipeline - the aggregation pipeline
      resultClass - the class to decode each document into
      Returns:
      an iterable containing the result of the aggregation operation
      MongoDB documentation
      Aggregation
      Since server release
      2.2
    • aggregate

      AggregateIterable<TDocument> aggregate(ClientSession clientSession, List<? extends Bson> pipeline)
      Aggregates documents according to the specified aggregation pipeline.
      Parameters:
      clientSession - the client session with which to associate this operation
      pipeline - the aggregation pipeline
      Returns:
      an iterable containing the result of the aggregation operation
      Since:
      3.6
      MongoDB documentation
      Aggregation
      Since server release
      3.6
    • aggregate

      <TResult> AggregateIterable<TResult> aggregate(ClientSession clientSession, List<? extends Bson> pipeline, Class<TResult> resultClass)
      Aggregates documents according to the specified aggregation pipeline.
      Type Parameters:
      TResult - the target document type of the iterable.
      Parameters:
      clientSession - the client session with which to associate this operation
      pipeline - the aggregation pipeline
      resultClass - the class to decode each document into
      Returns:
      an iterable containing the result of the aggregation operation
      Since:
      3.6
      MongoDB documentation
      Aggregation
      Since server release
      3.6
    • watch

      Creates a change stream for this collection.
      Returns:
      the change stream iterable
      Since:
      3.6
      MongoDB documentation
      Change Streams
    • watch

      <TResult> ChangeStreamIterable<TResult> watch(Class<TResult> resultClass)
      Creates a change stream for this collection.
      Type Parameters:
      TResult - the target document type of the iterable.
      Parameters:
      resultClass - the class to decode each document into
      Returns:
      the change stream iterable
      Since:
      3.6
      MongoDB documentation
      Change Streams
    • watch

      ChangeStreamIterable<TDocument> watch(List<? extends Bson> pipeline)
      Creates a change stream for this collection.
      Parameters:
      pipeline - the aggregation pipeline to apply to the change stream.
      Returns:
      the change stream iterable
      Since:
      3.6
      MongoDB documentation
      Change Streams
    • watch

      <TResult> ChangeStreamIterable<TResult> watch(List<? extends Bson> pipeline, Class<TResult> resultClass)
      Creates a change stream for this collection.
      Type Parameters:
      TResult - the target document type of the iterable.
      Parameters:
      pipeline - the aggregation pipeline to apply to the change stream
      resultClass - the class to decode each document into
      Returns:
      the change stream iterable
      Since:
      3.6
      MongoDB documentation
      Change Streams
    • watch

      Creates a change stream for this collection.
      Parameters:
      clientSession - the client session with which to associate this operation
      Returns:
      the change stream iterable
      Since:
      3.6
      MongoDB documentation
      Change Streams
      Since server release
      3.6
    • watch

      <TResult> ChangeStreamIterable<TResult> watch(ClientSession clientSession, Class<TResult> resultClass)
      Creates a change stream for this collection.
      Type Parameters:
      TResult - the target document type of the iterable.
      Parameters:
      clientSession - the client session with which to associate this operation
      resultClass - the class to decode each document into
      Returns:
      the change stream iterable
      Since:
      3.6
      MongoDB documentation
      Change Streams
      Since server release
      3.6
    • watch

      ChangeStreamIterable<TDocument> watch(ClientSession clientSession, List<? extends Bson> pipeline)
      Creates a change stream for this collection.
      Parameters:
      clientSession - the client session with which to associate this operation
      pipeline - the aggregation pipeline to apply to the change stream.
      Returns:
      the change stream iterable
      Since:
      3.6
      MongoDB documentation
      Change Streams
      Since server release
      3.6
    • watch

      <TResult> ChangeStreamIterable<TResult> watch(ClientSession clientSession, List<? extends Bson> pipeline, Class<TResult> resultClass)
      Creates a change stream for this collection.
      Type Parameters:
      TResult - the target document type of the iterable.
      Parameters:
      clientSession - the client session with which to associate this operation
      pipeline - the aggregation pipeline to apply to the change stream
      resultClass - the class to decode each document into
      Returns:
      the change stream iterable
      Since:
      3.6
      MongoDB documentation
      Change Streams
      Since server release
      3.6
    • mapReduce

      @Deprecated MapReduceIterable<TDocument> mapReduce(String mapFunction, String reduceFunction)
      Deprecated.
      Superseded by aggregate
      Aggregates documents according to the specified map-reduce function.
      Parameters:
      mapFunction - A JavaScript function that associates or "maps" a value with a key and emits the key and value pair.
      reduceFunction - A JavaScript function that "reduces" to a single object all the values associated with a particular key.
      Returns:
      an iterable containing the result of the map-reduce operation
      MongoDB documentation
      map-reduce
    • mapReduce

      @Deprecated <TResult> MapReduceIterable<TResult> mapReduce(String mapFunction, String reduceFunction, Class<TResult> resultClass)
      Deprecated.
      Superseded by aggregate
      Aggregates documents according to the specified map-reduce function.
      Type Parameters:
      TResult - the target document type of the iterable.
      Parameters:
      mapFunction - A JavaScript function that associates or "maps" a value with a key and emits the key and value pair.
      reduceFunction - A JavaScript function that "reduces" to a single object all the values associated with a particular key.
      resultClass - the class to decode each resulting document into.
      Returns:
      an iterable containing the result of the map-reduce operation
      MongoDB documentation
      map-reduce
    • mapReduce

      @Deprecated MapReduceIterable<TDocument> mapReduce(ClientSession clientSession, String mapFunction, String reduceFunction)
      Deprecated.
      Superseded by aggregate
      Aggregates documents according to the specified map-reduce function.
      Parameters:
      clientSession - the client session with which to associate this operation
      mapFunction - A JavaScript function that associates or "maps" a value with a key and emits the key and value pair.
      reduceFunction - A JavaScript function that "reduces" to a single object all the values associated with a particular key.
      Returns:
      an iterable containing the result of the map-reduce operation
      Since:
      3.6
      MongoDB documentation
      map-reduce
      Since server release
      3.6
    • mapReduce

      @Deprecated <TResult> MapReduceIterable<TResult> mapReduce(ClientSession clientSession, String mapFunction, String reduceFunction, Class<TResult> resultClass)
      Deprecated.
      Superseded by aggregate
      Aggregates documents according to the specified map-reduce function.
      Type Parameters:
      TResult - the target document type of the iterable.
      Parameters:
      clientSession - the client session with which to associate this operation
      mapFunction - A JavaScript function that associates or "maps" a value with a key and emits the key and value pair.
      reduceFunction - A JavaScript function that "reduces" to a single object all the values associated with a particular key.
      resultClass - the class to decode each resulting document into.
      Returns:
      an iterable containing the result of the map-reduce operation
      Since:
      3.6
      MongoDB documentation
      map-reduce
      Since server release
      3.6
    • bulkWrite

      BulkWriteResult bulkWrite(List<? extends WriteModel<? extends TDocument>> requests)
      Executes a mix of inserts, updates, replaces, and deletes.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled. The eligibility for retryable write support for bulk operations is determined on the whole bulk write. If the requests contain any UpdateManyModels or DeleteManyModels then the bulk operation will not support retryable writes.

      Parameters:
      requests - the writes to execute
      Returns:
      the result of the bulk write
      Throws:
      MongoBulkWriteException - if there's an exception in the bulk write operation
      MongoException - if there's an exception running the operation
    • bulkWrite

      BulkWriteResult bulkWrite(List<? extends WriteModel<? extends TDocument>> requests, BulkWriteOptions options)
      Executes a mix of inserts, updates, replaces, and deletes.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled. The eligibility for retryable write support for bulk operations is determined on the whole bulk write. If the requests contain any UpdateManyModels or DeleteManyModels then the bulk operation will not support retryable writes.

      Parameters:
      requests - the writes to execute
      options - the options to apply to the bulk write operation
      Returns:
      the result of the bulk write
      Throws:
      MongoBulkWriteException - if there's an exception in the bulk write operation
      MongoException - if there's an exception running the operation
    • bulkWrite

      BulkWriteResult bulkWrite(ClientSession clientSession, List<? extends WriteModel<? extends TDocument>> requests)
      Executes a mix of inserts, updates, replaces, and deletes.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled. The eligibility for retryable write support for bulk operations is determined on the whole bulk write. If the requests contain any UpdateManyModels or DeleteManyModels then the bulk operation will not support retryable writes.

      Parameters:
      clientSession - the client session with which to associate this operation
      requests - the writes to execute
      Returns:
      the result of the bulk write
      Throws:
      MongoBulkWriteException - if there's an exception in the bulk write operation
      MongoException - if there's an exception running the operation
      Since:
      3.6
      Since server release
      3.6
    • bulkWrite

      BulkWriteResult bulkWrite(ClientSession clientSession, List<? extends WriteModel<? extends TDocument>> requests, BulkWriteOptions options)
      Executes a mix of inserts, updates, replaces, and deletes.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled. The eligibility for retryable write support for bulk operations is determined on the whole bulk write. If the requests contain any UpdateManyModels or DeleteManyModels then the bulk operation will not support retryable writes.

      Parameters:
      clientSession - the client session with which to associate this operation
      requests - the writes to execute
      options - the options to apply to the bulk write operation
      Returns:
      the result of the bulk write
      Throws:
      MongoBulkWriteException - if there's an exception in the bulk write operation
      MongoException - if there's an exception running the operation
      Since:
      3.6
      Since server release
      3.6
    • insertOne

      InsertOneResult insertOne(TDocument document)
      Inserts the provided document. If the document is missing an identifier, the driver should generate one.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      document - the document to insert
      Returns:
      the insert one result
      Throws:
      MongoWriteException - if the write failed due to some specific write exception
      MongoWriteConcernException - if the write failed due to being unable to fulfil the write concern
      MongoCommandException - if the write failed due to a specific command exception
      MongoException - if the write failed due some other failure
    • insertOne

      InsertOneResult insertOne(TDocument document, InsertOneOptions options)
      Inserts the provided document. If the document is missing an identifier, the driver should generate one.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      document - the document to insert
      options - the options to apply to the operation
      Returns:
      the insert one result
      Throws:
      MongoWriteException - if the write failed due to some specific write exception
      MongoWriteConcernException - if the write failed due to being unable to fulfil the write concern
      MongoCommandException - if the write failed due to a specific command exception
      MongoException - if the write failed due some other failure
      Since:
      3.2
    • insertOne

      InsertOneResult insertOne(ClientSession clientSession, TDocument document)
      Inserts the provided document. If the document is missing an identifier, the driver should generate one.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      clientSession - the client session with which to associate this operation
      document - the document to insert
      Returns:
      the insert one result
      Throws:
      MongoWriteException - if the write failed due to some specific write exception
      MongoWriteConcernException - if the write failed due to being unable to fulfil the write concern
      MongoCommandException - if the write failed due to a specific command exception
      MongoException - if the write failed due some other failure
      Since:
      3.6
      Since server release
      3.6
    • insertOne

      InsertOneResult insertOne(ClientSession clientSession, TDocument document, InsertOneOptions options)
      Inserts the provided document. If the document is missing an identifier, the driver should generate one.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      clientSession - the client session with which to associate this operation
      document - the document to insert
      options - the options to apply to the operation
      Returns:
      the insert one result
      Throws:
      MongoWriteException - if the write failed due to some specific write exception
      MongoWriteConcernException - if the write failed due to being unable to fulfil the write concern
      MongoCommandException - if the write failed due to a specific command exception
      MongoException - if the write failed due some other failure
      Since:
      3.6
      Since server release
      3.6
    • insertMany

      InsertManyResult insertMany(List<? extends TDocument> documents)
      Inserts one or more documents. A call to this method is equivalent to a call to the bulkWrite method

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      documents - the documents to insert
      Returns:
      the insert many result
      Throws:
      MongoBulkWriteException - if there's an exception in the bulk write operation
      MongoCommandException - if the write failed due to a specific command exception
      MongoException - if the write failed due some other failure
      See Also:
    • insertMany

      InsertManyResult insertMany(List<? extends TDocument> documents, InsertManyOptions options)
      Inserts one or more documents. A call to this method is equivalent to a call to the bulkWrite method

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      documents - the documents to insert
      options - the options to apply to the operation
      Returns:
      the insert many result
      Throws:
      MongoBulkWriteException - if there's an exception in the bulk write operation
      MongoCommandException - if the write failed due to a specific command exception
      MongoException - if the write failed due some other failure
    • insertMany

      InsertManyResult insertMany(ClientSession clientSession, List<? extends TDocument> documents)
      Inserts one or more documents. A call to this method is equivalent to a call to the bulkWrite method

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      clientSession - the client session with which to associate this operation
      documents - the documents to insert
      Returns:
      the insert many result
      Throws:
      MongoBulkWriteException - if there's an exception in the bulk write operation
      MongoCommandException - if the write failed due to a specific command exception
      MongoException - if the write failed due some other failure
      Since:
      3.6
      See Also:
      Since server release
      3.6
    • insertMany

      InsertManyResult insertMany(ClientSession clientSession, List<? extends TDocument> documents, InsertManyOptions options)
      Inserts one or more documents. A call to this method is equivalent to a call to the bulkWrite method

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      clientSession - the client session with which to associate this operation
      documents - the documents to insert
      options - the options to apply to the operation
      Returns:
      the insert many result
      Throws:
      MongoBulkWriteException - if there's an exception in the bulk write operation
      MongoCommandException - if the write failed due to a specific command exception
      MongoException - if the write failed due some other failure
      Since:
      3.6
      Since server release
      3.6
    • deleteOne

      DeleteResult deleteOne(Bson filter)
      Removes at most one document from the collection that matches the given filter. If no documents match, the collection is not modified.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      filter - the query filter to apply the delete operation
      Returns:
      the result of the remove one operation
      Throws:
      MongoWriteException - if the write failed due to some specific write exception
      MongoWriteConcernException - if the write failed due to being unable to fulfil the write concern
      MongoCommandException - if the write failed due to a specific command exception
      MongoException - if the write failed due some other failure
    • deleteOne

      DeleteResult deleteOne(Bson filter, DeleteOptions options)
      Removes at most one document from the collection that matches the given filter. If no documents match, the collection is not modified.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      filter - the query filter to apply the delete operation
      options - the options to apply to the delete operation
      Returns:
      the result of the remove one operation
      Throws:
      MongoWriteException - if the write failed due to some specific write exception
      MongoWriteConcernException - if the write failed due to being unable to fulfil the write concern
      MongoCommandException - if the write failed due to a specific command exception
      MongoException - if the write failed due some other failure
      Since:
      3.4
    • deleteOne

      DeleteResult deleteOne(ClientSession clientSession, Bson filter)
      Removes at most one document from the collection that matches the given filter. If no documents match, the collection is not modified.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      clientSession - the client session with which to associate this operation
      filter - the query filter to apply the delete operation
      Returns:
      the result of the remove one operation
      Throws:
      MongoWriteException - if the write failed due to some specific write exception
      MongoWriteConcernException - if the write failed due to being unable to fulfil the write concern
      MongoCommandException - if the write failed due to a specific command exception
      MongoException - if the write failed due some other failure
      Since:
      3.6
      Since server release
      3.6
    • deleteOne

      DeleteResult deleteOne(ClientSession clientSession, Bson filter, DeleteOptions options)
      Removes at most one document from the collection that matches the given filter. If no documents match, the collection is not modified.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      clientSession - the client session with which to associate this operation
      filter - the query filter to apply the delete operation
      options - the options to apply to the delete operation
      Returns:
      the result of the remove one operation
      Throws:
      MongoWriteException - if the write failed due to some specific write exception
      MongoWriteConcernException - if the write failed due to being unable to fulfil the write concern
      MongoCommandException - if the write failed due to a specific command exception
      MongoException - if the write failed due some other failure
      Since:
      3.6
      Since server release
      3.6
    • deleteMany

      DeleteResult deleteMany(Bson filter)
      Removes all documents from the collection that match the given query filter. If no documents match, the collection is not modified.
      Parameters:
      filter - the query filter to apply the delete operation
      Returns:
      the result of the remove many operation
      Throws:
      MongoWriteException - if the write failed due to some specific write exception
      MongoWriteConcernException - if the write failed due to being unable to fulfil the write concern
      MongoCommandException - if the write failed due to a specific command exception
      MongoException - if the write failed due some other failure
    • deleteMany

      DeleteResult deleteMany(Bson filter, DeleteOptions options)
      Removes all documents from the collection that match the given query filter. If no documents match, the collection is not modified.
      Parameters:
      filter - the query filter to apply the delete operation
      options - the options to apply to the delete operation
      Returns:
      the result of the remove many operation
      Throws:
      MongoWriteException - if the write failed due to some specific write exception
      MongoWriteConcernException - if the write failed due to being unable to fulfil the write concern
      MongoCommandException - if the write failed due to a specific command exception
      MongoException - if the write failed due some other failure
      Since:
      3.4
    • deleteMany

      DeleteResult deleteMany(ClientSession clientSession, Bson filter)
      Removes all documents from the collection that match the given query filter. If no documents match, the collection is not modified.
      Parameters:
      clientSession - the client session with which to associate this operation
      filter - the query filter to apply the delete operation
      Returns:
      the result of the remove many operation
      Throws:
      MongoWriteException - if the write failed due to some specific write exception
      MongoWriteConcernException - if the write failed due to being unable to fulfil the write concern
      MongoCommandException - if the write failed due to a specific command exception
      MongoException - if the write failed due some other failure
      Since:
      3.6
      Since server release
      3.6
    • deleteMany

      DeleteResult deleteMany(ClientSession clientSession, Bson filter, DeleteOptions options)
      Removes all documents from the collection that match the given query filter. If no documents match, the collection is not modified.
      Parameters:
      clientSession - the client session with which to associate this operation
      filter - the query filter to apply the delete operation
      options - the options to apply to the delete operation
      Returns:
      the result of the remove many operation
      Throws:
      MongoWriteException - if the write failed due to some specific write exception
      MongoWriteConcernException - if the write failed due to being unable to fulfil the write concern
      MongoCommandException - if the write failed due to a specific command exception
      MongoException - if the write failed due some other failure
      Since:
      3.6
      Since server release
      3.6
    • replaceOne

      UpdateResult replaceOne(Bson filter, TDocument replacement)
      Replace a document in the collection according to the specified arguments.

      Use this method to replace a document using the specified replacement argument. To update the document with update operators, use the corresponding updateOne(Bson, Bson) method.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      filter - the query filter to apply the replace operation
      replacement - the replacement document
      Returns:
      the result of the replace one operation
      Throws:
      MongoWriteException - if the write failed due to some specific write exception
      MongoWriteConcernException - if the write failed due to being unable to fulfil the write concern
      MongoCommandException - if the write failed due to a specific command exception
      MongoException - if the write failed due some other failure
      MongoDB documentation
      Replace
      Update Command Behaviors
    • replaceOne

      UpdateResult replaceOne(Bson filter, TDocument replacement, ReplaceOptions replaceOptions)
      Replace a document in the collection according to the specified arguments.

      Use this method to replace a document using the specified replacement argument. To update the document with update operators, use the corresponding updateOne(Bson, Bson, UpdateOptions) method.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      filter - the query filter to apply the replace operation
      replacement - the replacement document
      replaceOptions - the options to apply to the replace operation
      Returns:
      the result of the replace one operation
      Throws:
      MongoWriteException - if the write failed due to some specific write exception
      MongoWriteConcernException - if the write failed due to being unable to fulfil the write concern
      MongoCommandException - if the write failed due to a specific command exception
      MongoException - if the write failed due some other failure
      Since:
      3.7
      MongoDB documentation
      Replace
      Update Command Behaviors
    • replaceOne

      UpdateResult replaceOne(ClientSession clientSession, Bson filter, TDocument replacement)
      Replace a document in the collection according to the specified arguments.

      Use this method to replace a document using the specified replacement argument. To update the document with update operators, use the corresponding updateOne(ClientSession, Bson, Bson) method.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      clientSession - the client session with which to associate this operation
      filter - the query filter to apply the replace operation
      replacement - the replacement document
      Returns:
      the result of the replace one operation
      Throws:
      MongoWriteException - if the write failed due to some specific write exception
      MongoWriteConcernException - if the write failed due to being unable to fulfil the write concern
      MongoCommandException - if the write failed due to a specific command exception
      MongoException - if the write failed due some other failure
      Since:
      3.6
      MongoDB documentation
      Replace
      Update Command Behaviors
      Since server release
      3.6
    • replaceOne

      UpdateResult replaceOne(ClientSession clientSession, Bson filter, TDocument replacement, ReplaceOptions replaceOptions)
      Replace a document in the collection according to the specified arguments.

      Use this method to replace a document using the specified replacement argument. To update the document with update operators, use the corresponding updateOne(ClientSession, Bson, Bson, UpdateOptions) method.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      clientSession - the client session with which to associate this operation
      filter - the query filter to apply the replace operation
      replacement - the replacement document
      replaceOptions - the options to apply to the replace operation
      Returns:
      the result of the replace one operation
      Throws:
      MongoWriteException - if the write failed due to some specific write exception
      MongoWriteConcernException - if the write failed due to being unable to fulfil the write concern
      MongoCommandException - if the write failed due to a specific command exception
      MongoException - if the write failed due some other failure
      Since:
      3.7
      MongoDB documentation
      Replace
      Update Command Behaviors
      Since server release
      3.6
    • updateOne

      UpdateResult updateOne(Bson filter, Bson update)
      Update a single document in the collection according to the specified arguments.

      Use this method to only update the corresponding fields in the document according to the update operators used in the update document. To replace the entire document with a new document, use the corresponding replaceOne(Bson, Object) method.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      filter - a document describing the query filter, which may not be null.
      update - a document describing the update, which may not be null. The update to apply must include at least one update operator.
      Returns:
      the result of the update one operation
      Throws:
      MongoWriteException - if the write failed due to some specific write exception
      MongoWriteConcernException - if the write failed due to being unable to fulfil the write concern
      MongoCommandException - if the write failed due to a specific command exception
      MongoException - if the write failed due some other failure
      See Also:
      MongoDB documentation
      Updates
      Update Operators
      Update Command Behaviors
    • updateOne

      UpdateResult updateOne(Bson filter, Bson update, UpdateOptions updateOptions)
      Update a single document in the collection according to the specified arguments.

      Use this method to only update the corresponding fields in the document according to the update operators used in the update document. To replace the entire document with a new document, use the corresponding replaceOne(Bson, Object, ReplaceOptions) method.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      filter - a document describing the query filter, which may not be null.
      update - a document describing the update, which may not be null. The update to apply must include at least one update operator.
      updateOptions - the options to apply to the update operation
      Returns:
      the result of the update one operation
      Throws:
      MongoWriteException - if the write failed due to some specific write exception
      MongoWriteConcernException - if the write failed due to being unable to fulfil the write concern
      MongoCommandException - if the write failed due to a specific command exception
      MongoException - if the write failed due some other failure
      See Also:
      MongoDB documentation
      Updates
      Update Operators
      Update Command Behaviors
    • updateOne

      UpdateResult updateOne(ClientSession clientSession, Bson filter, Bson update)
      Update a single document in the collection according to the specified arguments.

      Use this method to only update the corresponding fields in the document according to the update operators used in the update document. To replace the entire document with a new document, use the corresponding replaceOne(ClientSession, Bson, Object) method.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      clientSession - the client session with which to associate this operation
      filter - a document describing the query filter, which may not be null.
      update - a document describing the update, which may not be null. The update to apply must include at least one update operator.
      Returns:
      the result of the update one operation
      Throws:
      MongoWriteException - if the write failed due to some specific write exception
      MongoWriteConcernException - if the write failed due to being unable to fulfil the write concern
      MongoCommandException - if the write failed due to a specific command exception
      MongoException - if the write failed due some other failure
      Since:
      3.6
      See Also:
      MongoDB documentation
      Updates
      Update Operators
      Update Command Behaviors
      Since server release
      3.6
    • updateOne

      UpdateResult updateOne(ClientSession clientSession, Bson filter, Bson update, UpdateOptions updateOptions)
      Update a single document in the collection according to the specified arguments.

      Use this method to only update the corresponding fields in the document according to the update operators used in the update document. To replace the entire document with a new document, use the corresponding replaceOne(ClientSession, Bson, Object, ReplaceOptions) method.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      clientSession - the client session with which to associate this operation
      filter - a document describing the query filter, which may not be null.
      update - a document describing the update, which may not be null. The update to apply must include at least one update operator.
      updateOptions - the options to apply to the update operation
      Returns:
      the result of the update one operation
      Throws:
      MongoWriteException - if the write failed due to some specific write exception
      MongoWriteConcernException - if the write failed due to being unable to fulfil the write concern
      MongoCommandException - if the write failed due to a specific command exception
      MongoException - if the write failed due some other failure
      Since:
      3.6
      See Also:
      MongoDB documentation
      Updates
      Update Operators
      Update Command Behaviors
      Since server release
      3.6
    • updateOne

      UpdateResult updateOne(Bson filter, List<? extends Bson> update)
      Update a single document in the collection according to the specified arguments.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      filter - a document describing the query filter, which may not be null.
      update - a pipeline describing the update, which may not be null.
      Returns:
      the result of the update one operation
      Throws:
      MongoWriteException - if the write failed due some other failure specific to the update command
      MongoWriteConcernException - if the write failed due being unable to fulfil the write concern
      MongoException - if the write failed due some other failure
      Since:
      3.11
      MongoDB documentation
      Updates
      Update Operators
      Since server release
      4.2
    • updateOne

      UpdateResult updateOne(Bson filter, List<? extends Bson> update, UpdateOptions updateOptions)
      Update a single document in the collection according to the specified arguments.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      filter - a document describing the query filter, which may not be null.
      update - a pipeline describing the update, which may not be null.
      updateOptions - the options to apply to the update operation
      Returns:
      the result of the update one operation
      Throws:
      MongoWriteException - if the write failed due some other failure specific to the update command
      MongoWriteConcernException - if the write failed due being unable to fulfil the write concern
      MongoException - if the write failed due some other failure
      Since:
      3.11
      MongoDB documentation
      Updates
      Update Operators
      Since server release
      4.2
    • updateOne

      UpdateResult updateOne(ClientSession clientSession, Bson filter, List<? extends Bson> update)
      Update a single document in the collection according to the specified arguments.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      clientSession - the client session with which to associate this operation
      filter - a document describing the query filter, which may not be null.
      update - a pipeline describing the update, which may not be null.
      Returns:
      the result of the update one operation
      Throws:
      MongoWriteException - if the write failed due some other failure specific to the update command
      MongoWriteConcernException - if the write failed due being unable to fulfil the write concern
      MongoException - if the write failed due some other failure
      Since:
      3.11
      MongoDB documentation
      Updates
      Update Operators
      Since server release
      4.2
    • updateOne

      UpdateResult updateOne(ClientSession clientSession, Bson filter, List<? extends Bson> update, UpdateOptions updateOptions)
      Update a single document in the collection according to the specified arguments.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      clientSession - the client session with which to associate this operation
      filter - a document describing the query filter, which may not be null.
      update - a pipeline describing the update, which may not be null.
      updateOptions - the options to apply to the update operation
      Returns:
      the result of the update one operation
      Throws:
      MongoWriteException - if the write failed due some other failure specific to the update command
      MongoWriteConcernException - if the write failed due being unable to fulfil the write concern
      MongoException - if the write failed due some other failure
      Since:
      3.11
      MongoDB documentation
      Updates
      Update Operators
      Since server release
      4.2
    • updateMany

      UpdateResult updateMany(Bson filter, Bson update)
      Update all documents in the collection according to the specified arguments.
      Parameters:
      filter - a document describing the query filter, which may not be null.
      update - a document describing the update, which may not be null. The update to apply must include only update operators.
      Returns:
      the result of the update many operation
      Throws:
      MongoWriteException - if the write failed due to some specific write exception
      MongoWriteConcernException - if the write failed due to being unable to fulfil the write concern
      MongoCommandException - if the write failed due to a specific command exception
      MongoException - if the write failed due some other failure
      MongoDB documentation
      Updates
      Update Operators
    • updateMany

      UpdateResult updateMany(Bson filter, Bson update, UpdateOptions updateOptions)
      Update all documents in the collection according to the specified arguments.
      Parameters:
      filter - a document describing the query filter, which may not be null.
      update - a document describing the update, which may not be null. The update to apply must include only update operators.
      updateOptions - the options to apply to the update operation
      Returns:
      the result of the update many operation
      Throws:
      MongoWriteException - if the write failed due to some specific write exception
      MongoWriteConcernException - if the write failed due to being unable to fulfil the write concern
      MongoCommandException - if the write failed due to a specific command exception
      MongoException - if the write failed due some other failure
      MongoDB documentation
      Updates
      Update Operators
    • updateMany

      UpdateResult updateMany(ClientSession clientSession, Bson filter, Bson update)
      Update all documents in the collection according to the specified arguments.
      Parameters:
      clientSession - the client session with which to associate this operation
      filter - a document describing the query filter, which may not be null.
      update - a document describing the update, which may not be null. The update to apply must include only update operators.
      Returns:
      the result of the update many operation
      Throws:
      MongoWriteException - if the write failed due to some specific write exception
      MongoWriteConcernException - if the write failed due to being unable to fulfil the write concern
      MongoCommandException - if the write failed due to a specific command exception
      MongoException - if the write failed due some other failure
      Since:
      3.6
      MongoDB documentation
      Updates
      Update Operators
      Since server release
      3.6
    • updateMany

      UpdateResult updateMany(ClientSession clientSession, Bson filter, Bson update, UpdateOptions updateOptions)
      Update all documents in the collection according to the specified arguments.
      Parameters:
      clientSession - the client session with which to associate this operation
      filter - a document describing the query filter, which may not be null.
      update - a document describing the update, which may not be null. The update to apply must include only update operators.
      updateOptions - the options to apply to the update operation
      Returns:
      the result of the update many operation
      Throws:
      MongoWriteException - if the write failed due to some specific write exception
      MongoWriteConcernException - if the write failed due to being unable to fulfil the write concern
      MongoCommandException - if the write failed due to a specific command exception
      MongoException - if the write failed due some other failure
      Since:
      3.6
      MongoDB documentation
      Updates
      Update Operators
      Since server release
      3.6
    • updateMany

      UpdateResult updateMany(Bson filter, List<? extends Bson> update)
      Update all documents in the collection according to the specified arguments.
      Parameters:
      filter - a document describing the query filter, which may not be null.
      update - a pipeline describing the update, which may not be null.
      Returns:
      the result of the update many operation
      Throws:
      MongoWriteException - if the write failed due some other failure specific to the update command
      MongoWriteConcernException - if the write failed due being unable to fulfil the write concern
      MongoException - if the write failed due some other failure
      Since:
      3.11
      MongoDB documentation
      Updates
      Update Operators
      Since server release
      4.2
    • updateMany

      UpdateResult updateMany(Bson filter, List<? extends Bson> update, UpdateOptions updateOptions)
      Update all documents in the collection according to the specified arguments.
      Parameters:
      filter - a document describing the query filter, which may not be null.
      update - a pipeline describing the update, which may not be null.
      updateOptions - the options to apply to the update operation
      Returns:
      the result of the update many operation
      Throws:
      MongoWriteException - if the write failed due some other failure specific to the update command
      MongoWriteConcernException - if the write failed due being unable to fulfil the write concern
      MongoException - if the write failed due some other failure
      Since:
      3.11
      MongoDB documentation
      Updates
      Update Operators
      Since server release
      4.2
    • updateMany

      UpdateResult updateMany(ClientSession clientSession, Bson filter, List<? extends Bson> update)
      Update all documents in the collection according to the specified arguments.
      Parameters:
      clientSession - the client session with which to associate this operation
      filter - a document describing the query filter, which may not be null.
      update - a pipeline describing the update, which may not be null.
      Returns:
      the result of the update many operation
      Throws:
      MongoWriteException - if the write failed due some other failure specific to the update command
      MongoWriteConcernException - if the write failed due being unable to fulfil the write concern
      MongoException - if the write failed due some other failure
      Since:
      3.11
      MongoDB documentation
      Updates
      Update Operators
      Since server release
      4.2
    • updateMany

      UpdateResult updateMany(ClientSession clientSession, Bson filter, List<? extends Bson> update, UpdateOptions updateOptions)
      Update all documents in the collection according to the specified arguments.
      Parameters:
      clientSession - the client session with which to associate this operation
      filter - a document describing the query filter, which may not be null.
      update - a pipeline describing the update, which may not be null.
      updateOptions - the options to apply to the update operation
      Returns:
      the result of the update many operation
      Throws:
      MongoWriteException - if the write failed due some other failure specific to the update command
      MongoWriteConcernException - if the write failed due being unable to fulfil the write concern
      MongoException - if the write failed due some other failure
      Since:
      3.11
      MongoDB documentation
      Updates
      Update Operators
      Since server release
      4.2
    • findOneAndDelete

      @Nullable TDocument findOneAndDelete(Bson filter)
      Atomically find a document and remove it.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      filter - the query filter to find the document with
      Returns:
      the document that was removed. If no documents matched the query filter, then null will be returned
    • findOneAndDelete

      @Nullable TDocument findOneAndDelete(Bson filter, FindOneAndDeleteOptions options)
      Atomically find a document and remove it.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      filter - the query filter to find the document with
      options - the options to apply to the operation
      Returns:
      the document that was removed. If no documents matched the query filter, then null will be returned
    • findOneAndDelete

      @Nullable TDocument findOneAndDelete(ClientSession clientSession, Bson filter)
      Atomically find a document and remove it.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      clientSession - the client session with which to associate this operation
      filter - the query filter to find the document with
      Returns:
      the document that was removed. If no documents matched the query filter, then null will be returned
      Since:
      3.6
      Since server release
      3.6
    • findOneAndDelete

      @Nullable TDocument findOneAndDelete(ClientSession clientSession, Bson filter, FindOneAndDeleteOptions options)
      Atomically find a document and remove it.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      clientSession - the client session with which to associate this operation
      filter - the query filter to find the document with
      options - the options to apply to the operation
      Returns:
      the document that was removed. If no documents matched the query filter, then null will be returned
      Since:
      3.6
      Since server release
      3.6
    • findOneAndReplace

      @Nullable TDocument findOneAndReplace(Bson filter, TDocument replacement)
      Atomically find a document and replace it.

      Use this method to replace a document using the specified replacement argument. To update the document with update operators, use the corresponding findOneAndUpdate(Bson, Bson) method.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      filter - the query filter to apply the replace operation
      replacement - the replacement document
      Returns:
      the document that was replaced. Depending on the value of the returnOriginal property, this will either be the document as it was before the update or as it is after the update. If no documents matched the query filter, then null will be returned
      MongoDB documentation
      Update Command Behaviors
    • findOneAndReplace

      @Nullable TDocument findOneAndReplace(Bson filter, TDocument replacement, FindOneAndReplaceOptions options)
      Atomically find a document and replace it.

      Use this method to replace a document using the specified replacement argument. To update the document with update operators, use the corresponding findOneAndUpdate(Bson, Bson, FindOneAndUpdateOptions) method.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      filter - the query filter to apply the replace operation
      replacement - the replacement document
      options - the options to apply to the operation
      Returns:
      the document that was replaced. Depending on the value of the returnOriginal property, this will either be the document as it was before the update or as it is after the update. If no documents matched the query filter, then null will be returned
      MongoDB documentation
      Update Command Behaviors
    • findOneAndReplace

      @Nullable TDocument findOneAndReplace(ClientSession clientSession, Bson filter, TDocument replacement)
      Atomically find a document and replace it.

      Use this method to replace a document using the specified replacement argument. To update the document with update operators, use the corresponding findOneAndUpdate(ClientSession, Bson, Bson) method.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      clientSession - the client session with which to associate this operation
      filter - the query filter to apply the replace operation
      replacement - the replacement document
      Returns:
      the document that was replaced. Depending on the value of the returnOriginal property, this will either be the document as it was before the update or as it is after the update. If no documents matched the query filter, then null will be returned
      Since:
      3.6
      MongoDB documentation
      Update Command Behaviors
      Since server release
      3.6
    • findOneAndReplace

      @Nullable TDocument findOneAndReplace(ClientSession clientSession, Bson filter, TDocument replacement, FindOneAndReplaceOptions options)
      Atomically find a document and replace it.

      Use this method to replace a document using the specified replacement argument. To update the document with update operators, use the corresponding findOneAndUpdate(ClientSession, Bson, Bson, FindOneAndUpdateOptions) method.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      clientSession - the client session with which to associate this operation
      filter - the query filter to apply the replace operation
      replacement - the replacement document
      options - the options to apply to the operation
      Returns:
      the document that was replaced. Depending on the value of the returnOriginal property, this will either be the document as it was before the update or as it is after the update. If no documents matched the query filter, then null will be returned
      Since:
      3.6
      MongoDB documentation
      Update Command Behaviors
      Since server release
      3.6
    • findOneAndUpdate

      @Nullable TDocument findOneAndUpdate(Bson filter, Bson update)
      Atomically find a document and update it.

      Use this method to only update the corresponding fields in the document according to the update operators used in the update document. To replace the entire document with a new document, use the corresponding findOneAndReplace(Bson, Object) method.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      filter - a document describing the query filter, which may not be null.
      update - a document describing the update, which may not be null. The update to apply must include at least one update operator.
      Returns:
      the document that was updated before the update was applied. If no documents matched the query filter, then null will be returned
      See Also:
      MongoDB documentation
      Update Command Behaviors
    • findOneAndUpdate

      @Nullable TDocument findOneAndUpdate(Bson filter, Bson update, FindOneAndUpdateOptions options)
      Atomically find a document and update it.

      Use this method to only update the corresponding fields in the document according to the update operators used in the update document. To replace the entire document with a new document, use the corresponding findOneAndReplace(Bson, Object, FindOneAndReplaceOptions) method.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      filter - a document describing the query filter, which may not be null.
      update - a document describing the update, which may not be null. The update to apply must include at least one update operator.
      options - the options to apply to the operation
      Returns:
      the document that was updated. Depending on the value of the returnOriginal property, this will either be the document as it was before the update or as it is after the update. If no documents matched the query filter, then null will be returned
      See Also:
      MongoDB documentation
      Update Command Behaviors
    • findOneAndUpdate

      @Nullable TDocument findOneAndUpdate(ClientSession clientSession, Bson filter, Bson update)
      Atomically find a document and update it.

      Use this method to only update the corresponding fields in the document according to the update operators used in the update document. To replace the entire document with a new document, use the corresponding findOneAndReplace(ClientSession, Bson, Object) method.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      clientSession - the client session with which to associate this operation
      filter - a document describing the query filter, which may not be null.
      update - a document describing the update, which may not be null. The update to apply must include at least one update operator.
      Returns:
      the document that was updated before the update was applied. If no documents matched the query filter, then null will be returned
      Since:
      3.6
      See Also:
      MongoDB documentation
      Update Command Behaviors
      Since server release
      3.6
    • findOneAndUpdate

      @Nullable TDocument findOneAndUpdate(ClientSession clientSession, Bson filter, Bson update, FindOneAndUpdateOptions options)
      Atomically find a document and update it.

      Use this method to only update the corresponding fields in the document according to the update operators used in the update document. To replace the entire document with a new document, use the corresponding findOneAndReplace(ClientSession, Bson, Object, FindOneAndReplaceOptions) method.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      clientSession - the client session with which to associate this operation
      filter - a document describing the query filter, which may not be null.
      update - a document describing the update, which may not be null. The update to apply must include at least one update operator.
      options - the options to apply to the operation
      Returns:
      the document that was updated. Depending on the value of the returnOriginal property, this will either be the document as it was before the update or as it is after the update. If no documents matched the query filter, then null will be returned
      Since:
      3.6
      See Also:
      MongoDB documentation
      Update Command Behaviors
      Since server release
      3.6
    • findOneAndUpdate

      @Nullable TDocument findOneAndUpdate(Bson filter, List<? extends Bson> update)
      Atomically find a document and update it.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      filter - a document describing the query filter, which may not be null.
      update - a pipeline describing the update, which may not be null.
      Returns:
      the document that was updated before the update was applied. If no documents matched the query filter, then null will be returned
      Since:
      3.11
      Since server release
      4.2
    • findOneAndUpdate

      @Nullable TDocument findOneAndUpdate(Bson filter, List<? extends Bson> update, FindOneAndUpdateOptions options)
      Atomically find a document and update it.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      filter - a document describing the query filter, which may not be null.
      update - a pipeline describing the update, which may not be null.
      options - the options to apply to the operation
      Returns:
      the document that was updated. Depending on the value of the returnOriginal property, this will either be the document as it was before the update or as it is after the update. If no documents matched the query filter, then null will be returned
      Since:
      3.11
      Since server release
      4.2
    • findOneAndUpdate

      @Nullable TDocument findOneAndUpdate(ClientSession clientSession, Bson filter, List<? extends Bson> update)
      Atomically find a document and update it.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      clientSession - the client session with which to associate this operation
      filter - a document describing the query filter, which may not be null.
      update - a pipeline describing the update, which may not be null.
      Returns:
      the document that was updated before the update was applied. If no documents matched the query filter, then null will be returned
      Since:
      3.11
      Since server release
      4.2
    • findOneAndUpdate

      @Nullable TDocument findOneAndUpdate(ClientSession clientSession, Bson filter, List<? extends Bson> update, FindOneAndUpdateOptions options)
      Atomically find a document and update it.

      Note: Supports retryable writes on MongoDB server versions 3.6 or higher when the retryWrites setting is enabled.

      Parameters:
      clientSession - the client session with which to associate this operation
      filter - a document describing the query filter, which may not be null.
      update - a pipeline describing the update, which may not be null.
      options - the options to apply to the operation
      Returns:
      the document that was updated. Depending on the value of the returnOriginal property, this will either be the document as it was before the update or as it is after the update. If no documents matched the query filter, then null will be returned
      Since:
      3.11
      Since server release
      4.2
    • drop

      void drop()
      Drops this collection from the Database.
      MongoDB documentation
      Drop Collection
    • drop

      void drop(ClientSession clientSession)
      Drops this collection from the Database.
      Parameters:
      clientSession - the client session with which to associate this operation
      Since:
      3.6
      MongoDB documentation
      Drop Collection
      Since server release
      3.6
    • createIndex

      String createIndex(Bson keys)
      Create an index with the given keys.
      Parameters:
      keys - an object describing the index key(s), which may not be null.
      Returns:
      the index name
      MongoDB documentation
      Create indexes
    • createIndex

      String createIndex(Bson keys, IndexOptions indexOptions)
      Create an index with the given keys and options.
      Parameters:
      keys - an object describing the index key(s), which may not be null.
      indexOptions - the options for the index
      Returns:
      the index name
      MongoDB documentation
      Create indexes
    • createIndex

      String createIndex(ClientSession clientSession, Bson keys)
      Create an index with the given keys.
      Parameters:
      clientSession - the client session with which to associate this operation
      keys - an object describing the index key(s), which may not be null.
      Returns:
      the index name
      Since:
      3.6
      MongoDB documentation
      Create indexes
      Since server release
      3.6
    • createIndex

      String createIndex(ClientSession clientSession, Bson keys, IndexOptions indexOptions)
      Create an index with the given keys and options.
      Parameters:
      clientSession - the client session with which to associate this operation
      keys - an object describing the index key(s), which may not be null.
      indexOptions - the options for the index
      Returns:
      the index name
      Since:
      3.6
      MongoDB documentation
      Create indexes
      Since server release
      3.6
    • createIndexes

      List<String> createIndexes(List<IndexModel> indexes)
      Create multiple indexes.
      Parameters:
      indexes - the list of indexes
      Returns:
      the list of index names
      MongoDB documentation
      Create indexes
    • createIndexes

      List<String> createIndexes(List<IndexModel> indexes, CreateIndexOptions createIndexOptions)
      Create multiple indexes.
      Parameters:
      indexes - the list of indexes
      createIndexOptions - options to use when creating indexes
      Returns:
      the list of index names
      Since:
      3.6
      MongoDB documentation
      Create indexes
    • createIndexes

      List<String> createIndexes(ClientSession clientSession, List<IndexModel> indexes)
      Create multiple indexes.
      Parameters:
      clientSession - the client session with which to associate this operation
      indexes - the list of indexes
      Returns:
      the list of index names
      Since:
      3.6
      MongoDB documentation
      Create indexes
      Since server release
      3.6
    • createIndexes

      List<String> createIndexes(ClientSession clientSession, List<IndexModel> indexes, CreateIndexOptions createIndexOptions)
      Create multiple indexes.
      Parameters:
      clientSession - the client session with which to associate this operation
      indexes - the list of indexes
      createIndexOptions - options to use when creating indexes
      Returns:
      the list of index names
      Since:
      3.6
      MongoDB documentation
      Create indexes
      Since server release
      3.6
    • listIndexes

      Get all the indexes in this collection.
      Returns:
      the list indexes iterable interface
      MongoDB documentation
      List indexes
    • listIndexes

      <TResult> ListIndexesIterable<TResult> listIndexes(Class<TResult> resultClass)
      Get all the indexes in this collection.
      Type Parameters:
      TResult - the target document type of the iterable.
      Parameters:
      resultClass - the class to decode each document into
      Returns:
      the list indexes iterable interface
      MongoDB documentation
      List indexes
    • listIndexes

      ListIndexesIterable<Document> listIndexes(ClientSession clientSession)
      Get all the indexes in this collection.
      Parameters:
      clientSession - the client session with which to associate this operation
      Returns:
      the list indexes iterable interface
      Since:
      3.6
      MongoDB documentation
      List indexes
      Since server release
      3.6
    • listIndexes

      <TResult> ListIndexesIterable<TResult> listIndexes(ClientSession clientSession, Class<TResult> resultClass)
      Get all the indexes in this collection.
      Type Parameters:
      TResult - the target document type of the iterable.
      Parameters:
      clientSession - the client session with which to associate this operation
      resultClass - the class to decode each document into
      Returns:
      the list indexes iterable interface
      Since:
      3.6
      MongoDB documentation
      List indexes
      Since server release
      3.6
    • dropIndex

      void dropIndex(String indexName)
      Drops the index given its name.
      Parameters:
      indexName - the name of the index to remove
      MongoDB documentation
      Drop indexes
    • dropIndex

      void dropIndex(String indexName, DropIndexOptions dropIndexOptions)
      Drops the index given its name.
      Parameters:
      indexName - the name of the index to remove
      dropIndexOptions - the options to use when dropping indexes
      Since:
      3.6
      MongoDB documentation
      Drop indexes
    • dropIndex

      void dropIndex(Bson keys)
      Drops the index given the keys used to create it.
      Parameters:
      keys - the keys of the index to remove
      MongoDB documentation
      Drop indexes
    • dropIndex

      void dropIndex(Bson keys, DropIndexOptions dropIndexOptions)
      Drops the index given the keys used to create it.
      Parameters:
      keys - the keys of the index to remove
      dropIndexOptions - the options to use when dropping indexes
      Since:
      3.6
      MongoDB documentation
      Drop indexes
    • dropIndex

      void dropIndex(ClientSession clientSession, String indexName)
      Drops the index given its name.
      Parameters:
      clientSession - the client session with which to associate this operation
      indexName - the name of the index to remove
      Since:
      3.6
      MongoDB documentation
      Drop indexes
      Since server release
      3.6
    • dropIndex

      void dropIndex(ClientSession clientSession, Bson keys)
      Drops the index given the keys used to create it.
      Parameters:
      clientSession - the client session with which to associate this operation
      keys - the keys of the index to remove
      Since:
      3.6
      MongoDB documentation
      Drop indexes
      Since server release
      3.6
    • dropIndex

      void dropIndex(ClientSession clientSession, String indexName, DropIndexOptions dropIndexOptions)
      Drops the index given its name.
      Parameters:
      clientSession - the client session with which to associate this operation
      indexName - the name of the index to remove
      dropIndexOptions - the options to use when dropping indexes
      Since:
      3.6
      MongoDB documentation
      Drop indexes
      Since server release
      3.6
    • dropIndex

      void dropIndex(ClientSession clientSession, Bson keys, DropIndexOptions dropIndexOptions)
      Drops the index given the keys used to create it.
      Parameters:
      clientSession - the client session with which to associate this operation
      keys - the keys of the index to remove
      dropIndexOptions - the options to use when dropping indexes
      Since:
      3.6
      MongoDB documentation
      Drop indexes
      Since server release
      3.6
    • dropIndexes

      void dropIndexes()
      Drop all the indexes on this collection, except for the default on _id.
      MongoDB documentation
      Drop indexes
    • dropIndexes

      void dropIndexes(ClientSession clientSession)
      Drop all the indexes on this collection, except for the default on _id.
      Parameters:
      clientSession - the client session with which to associate this operation
      Since:
      3.6
      MongoDB documentation
      Drop indexes
      Since server release
      3.6
    • dropIndexes

      void dropIndexes(DropIndexOptions dropIndexOptions)
      Drop all the indexes on this collection, except for the default on _id.
      Parameters:
      dropIndexOptions - the options to use when dropping indexes
      Since:
      3.6
      MongoDB documentation
      Drop indexes
    • dropIndexes

      void dropIndexes(ClientSession clientSession, DropIndexOptions dropIndexOptions)
      Drop all the indexes on this collection, except for the default on _id.
      Parameters:
      clientSession - the client session with which to associate this operation
      dropIndexOptions - the options to use when dropping indexes
      Since:
      3.6
      MongoDB documentation
      Drop indexes
      Since server release
      3.6
    • renameCollection

      void renameCollection(MongoNamespace newCollectionNamespace)
      Rename the collection with oldCollectionName to the newCollectionName.
      Parameters:
      newCollectionNamespace - the namespace the collection will be renamed to
      Throws:
      MongoServerException - if you provide a newCollectionName that is the name of an existing collection, or if the oldCollectionName is the name of a collection that doesn't exist
      MongoDB documentation
      Rename collection
    • renameCollection

      void renameCollection(MongoNamespace newCollectionNamespace, RenameCollectionOptions renameCollectionOptions)
      Rename the collection with oldCollectionName to the newCollectionName.
      Parameters:
      newCollectionNamespace - the name the collection will be renamed to
      renameCollectionOptions - the options for renaming a collection
      Throws:
      MongoServerException - if you provide a newCollectionName that is the name of an existing collection and dropTarget is false, or if the oldCollectionName is the name of a collection that doesn't exist
      MongoDB documentation
      Rename collection
    • renameCollection

      void renameCollection(ClientSession clientSession, MongoNamespace newCollectionNamespace)
      Rename the collection with oldCollectionName to the newCollectionName.
      Parameters:
      clientSession - the client session with which to associate this operation
      newCollectionNamespace - the namespace the collection will be renamed to
      Throws:
      MongoServerException - if you provide a newCollectionName that is the name of an existing collection, or if the oldCollectionName is the name of a collection that doesn't exist
      Since:
      3.6
      MongoDB documentation
      Rename collection
      Since server release
      3.6
    • renameCollection

      void renameCollection(ClientSession clientSession, MongoNamespace newCollectionNamespace, RenameCollectionOptions renameCollectionOptions)
      Rename the collection with oldCollectionName to the newCollectionName.
      Parameters:
      clientSession - the client session with which to associate this operation
      newCollectionNamespace - the name the collection will be renamed to
      renameCollectionOptions - the options for renaming a collection
      Throws:
      MongoServerException - if you provide a newCollectionName that is the name of an existing collection and dropTarget is false, or if the oldCollectionName is the name of a collection that doesn't exist
      Since:
      3.6
      MongoDB documentation
      Rename collection
      Since server release
      3.6