MongoCollection

case class MongoCollection[TResult](wrapped: com.mongodb.reactivestreams.client.MongoCollection[TResult]) extends Product with Serializable

The MongoCollection representation.

TResult: The type that this collection will encode documents from and decode documents to.
wrapped: the underlying java MongoCollection

Since: 1.0

Linear Supertypes

Serializable, Product, Equals, AnyRef, Any

Ordering

Alphabetic
By Inheritance

Inherited

MongoCollection
Serializable
Product
Equals
AnyRef
Any

Hide All
Show All

Visibility

Public
Protected

Instance Constructors

new MongoCollection(wrapped: com.mongodb.reactivestreams.client.MongoCollection[TResult])
wrapped
the underlying java MongoCollection

Value Members

final def !=(arg0: Any): Boolean
Definition Classes
AnyRef → Any
final def ##: Int
Definition Classes
AnyRef → Any
final def ==(arg0: Any): Boolean
Definition Classes
AnyRef → Any
def aggregate[C](clientSession: ClientSession, pipeline: Seq[Bson])(implicit e: DefaultsTo[C, TResult], ct: ClassTag[C]): AggregateObservable[C]
Aggregates documents according to the specified aggregation pipeline.
Aggregates documents according to the specified aggregation pipeline.
clientSession
the client session with which to associate this operation
pipeline
the aggregate pipeline
returns
a Observable containing the result of the aggregation operation Aggregation
Since
2.2
Note
Requires MongoDB 3.6 or greater
def aggregate[C](pipeline: Seq[Bson])(implicit e: DefaultsTo[C, TResult], ct: ClassTag[C]): AggregateObservable[C]
Aggregates documents according to the specified aggregation pipeline.
Aggregates documents according to the specified aggregation pipeline.
pipeline
the aggregate pipeline
returns
a Observable containing the result of the aggregation operation Aggregation
final def asInstanceOf[T0]: T0
Definition Classes
Any
def bulkWrite(clientSession: ClientSession, requests: Seq[_ <: WriteModel[_ <: TResult]], options: BulkWriteOptions): SingleObservable[BulkWriteResult]
Executes a mix of inserts, updates, replaces, and deletes.
Executes a mix of inserts, updates, replaces, and deletes.
clientSession
the client session with which to associate this operation
requests
the writes to execute
options
the options to apply to the bulk write operation
returns
a Observable with a single element the BulkWriteResult
Since
2.2
Note
Requires MongoDB 3.6 or greater
def bulkWrite(clientSession: ClientSession, requests: Seq[_ <: WriteModel[_ <: TResult]]): SingleObservable[BulkWriteResult]
Executes a mix of inserts, updates, replaces, and deletes.
Executes a mix of inserts, updates, replaces, and deletes.
clientSession
the client session with which to associate this operation
requests
the writes to execute
returns
a Observable with a single element the BulkWriteResult
Since
2.2
Note
Requires MongoDB 3.6 or greater
def bulkWrite(requests: Seq[_ <: WriteModel[_ <: TResult]], options: BulkWriteOptions): SingleObservable[BulkWriteResult]
Executes a mix of inserts, updates, replaces, and deletes.
Executes a mix of inserts, updates, replaces, and deletes.
requests
the writes to execute
options
the options to apply to the bulk write operation
returns
a Observable with a single element the BulkWriteResult
def bulkWrite(requests: Seq[_ <: WriteModel[_ <: TResult]]): SingleObservable[BulkWriteResult]
Executes a mix of inserts, updates, replaces, and deletes.
Executes a mix of inserts, updates, replaces, and deletes.
requests
the writes to execute
returns
a Observable with a single element the BulkWriteResult
def clone(): AnyRef
Attributes
protected[lang]
Definition Classes
AnyRef
Annotations
@throws(classOf[java.lang.CloneNotSupportedException]) @native() @HotSpotIntrinsicCandidate()
lazy val codecRegistry: CodecRegistry
Get the codec registry for the MongoDatabase.
Get the codec registry for the MongoDatabase.
returns
the { @link org.bson.codecs.configuration.CodecRegistry}
def countDocuments(clientSession: ClientSession, filter: Bson, options: CountOptions): SingleObservable[Long]
Counts the number of documents in the collection according to the given options.
Counts the number of documents in the collection according to the given options.
Note: For a fast count of the total documents in a collection see estimatedDocumentCount() When migrating from count() to countDocuments() the following query operators must be replaced:
```
+-------------+--------------------------------+
| Operator    | Replacement                    |
+=============+================================+
| $where      |  $expr                         |
+-------------+--------------------------------+
| $near       |  $geoWithin with $center       |
+-------------+--------------------------------+
| $nearSphere |  $geoWithin with $centerSphere |
+-------------+--------------------------------+
```
clientSession
the client session with which to associate this operation
filter
the query filter
options
the options describing the count
returns
a publisher with a single element indicating the number of documents
Since
2.4
Note
Requires MongoDB 3.6 or greater
def countDocuments(clientSession: ClientSession, filter: Bson): SingleObservable[Long]
Counts the number of documents in the collection according to the given options.
Counts the number of documents in the collection according to the given options.
Note: For a fast count of the total documents in a collection see estimatedDocumentCount() When migrating from count() to countDocuments() the following query operators must be replaced:
```
+-------------+--------------------------------+
| Operator    | Replacement                    |
+=============+================================+
| $where      |  $expr                         |
+-------------+--------------------------------+
| $near       |  $geoWithin with $center       |
+-------------+--------------------------------+
| $nearSphere |  $geoWithin with $centerSphere |
+-------------+--------------------------------+
```
clientSession
the client session with which to associate this operation
filter
the query filter
returns
a publisher with a single element indicating the number of documents
Since
2.4
Note
Requires MongoDB 3.6 or greater
def countDocuments(clientSession: ClientSession): SingleObservable[Long]
Counts the number of documents in the collection.
Counts the number of documents in the collection.
Note: For a fast count of the total documents in a collection see estimatedDocumentCount() When migrating from count() to countDocuments() the following query operators must be replaced:
```
+-------------+--------------------------------+
| Operator    | Replacement                    |
+=============+================================+
| $where      |  $expr                         |
+-------------+--------------------------------+
| $near       |  $geoWithin with $center       |
+-------------+--------------------------------+
| $nearSphere |  $geoWithin with $centerSphere |
+-------------+--------------------------------+
```
clientSession
the client session with which to associate this operation
returns
a publisher with a single element indicating the number of documents
Since
2.4
Note
Requires MongoDB 3.6 or greater
def countDocuments(filter: Bson, options: CountOptions): SingleObservable[Long]
Counts the number of documents in the collection according to the given options.
Counts the number of documents in the collection according to the given options.
Note: For a fast count of the total documents in a collection see estimatedDocumentCount() When migrating from count() to countDocuments() the following query operators must be replaced:
```
+-------------+--------------------------------+
| Operator    | Replacement                    |
+=============+================================+
| $where      |  $expr                         |
+-------------+--------------------------------+
| $near       |  $geoWithin with $center       |
+-------------+--------------------------------+
| $nearSphere |  $geoWithin with $centerSphere |
+-------------+--------------------------------+
```
filter
the query filter
options
the options describing the count
returns
a publisher with a single element indicating the number of documents
Since
2.4
def countDocuments(filter: Bson): SingleObservable[Long]
Counts the number of documents in the collection according to the given options.
Counts the number of documents in the collection according to the given options.
Note: For a fast count of the total documents in a collection see estimatedDocumentCount() When migrating from count() to countDocuments() the following query operators must be replaced:
```
+-------------+--------------------------------+
| Operator    | Replacement                    |
+=============+================================+
| $where      |  $expr                         |
+-------------+--------------------------------+
| $near       |  $geoWithin with $center       |
+-------------+--------------------------------+
| $nearSphere |  $geoWithin with $centerSphere |
+-------------+--------------------------------+
```
filter
the query filter
returns
a publisher with a single element indicating the number of documents
Since
2.4

def countDocuments(): SingleObservable[Long]

Counts the number of documents in the collection.

Note: For a fast count of the total documents in a collection see estimatedDocumentCount() When migrating from count() to countDocuments() the following query operators must be replaced:

+-------------+--------------------------------+
| Operator    | Replacement                    |
+=============+================================+
| $where      |  $expr                         |
+-------------+--------------------------------+
| $near       |  $geoWithin with $center       |
+-------------+--------------------------------+
| $nearSphere |  $geoWithin with $centerSphere |
+-------------+--------------------------------+

returns: a publisher with a single element indicating the number of documents

Since: 2.4

def createIndex(clientSession: ClientSession, key: Bson, options: IndexOptions): SingleObservable[String]
Create Index
Create Index
clientSession
the client session with which to associate this operation
key
an object describing the index key(s), which may not be null. This can be of any type for which a Codec is registered
options
the options for the index
returns
an empty Observable that indicates when the operation has completed
Since
2.2
Note
Requires MongoDB 3.6 or greater
def createIndex(clientSession: ClientSession, key: Bson): SingleObservable[String]
Create Index
Create Index
clientSession
the client session with which to associate this operation
key
an object describing the index key(s), which may not be null. This can be of any type for which a Codec is registered
returns
an empty Observable that indicates when the operation has completed
Since
2.2
Note
Requires MongoDB 3.6 or greater
def createIndex(key: Bson, options: IndexOptions): SingleObservable[String]
Create Index
Create Index
key
an object describing the index key(s), which may not be null. This can be of any type for which a Codec is registered
options
the options for the index
returns
an empty Observable that indicates when the operation has completed
def createIndex(key: Bson): SingleObservable[String]
Create Index
Create Index
key
an object describing the index key(s), which may not be null. This can be of any type for which a Codec is registered
returns
an empty Observable that indicates when the operation has completed
def createIndexes(clientSession: ClientSession, models: Seq[IndexModel], createIndexOptions: CreateIndexOptions): Observable[String]
Create multiple indexes.
Create multiple indexes.
Create Index
clientSession
the client session with which to associate this operation
models
the list of indexes to create
createIndexOptions
options to use when creating indexes
returns
a Observable with the names of the indexes
Since
2.2
Note
Requires MongoDB 3.6 or greater
def createIndexes(clientSession: ClientSession, models: Seq[IndexModel]): Observable[String]
Create multiple indexes.
Create multiple indexes.
Create Index
clientSession
the client session with which to associate this operation
models
the list of indexes to create
returns
a Observable with the names of the indexes
Since
2.2
Note
Requires MongoDB 3.6 or greater
def createIndexes(models: Seq[IndexModel], createIndexOptions: CreateIndexOptions): Observable[String]
Create multiple indexes.
Create multiple indexes.
Create Index
models
the list of indexes to create
createIndexOptions
options to use when creating indexes
returns
a Observable with the names of the indexes
Since
2.2
def createIndexes(models: Seq[IndexModel]): Observable[String]
Create multiple indexes.
Create multiple indexes.
Create Index
models
the list of indexes to create
returns
a Observable with the names of the indexes
def deleteMany(clientSession: ClientSession, filter: Bson, options: DeleteOptions): SingleObservable[DeleteResult]
Removes all documents from the collection that match the given query filter.
Removes all documents from the collection that match the given query filter. If no documents match, the collection is not modified.
clientSession
the client session with which to associate this operation
filter
the query filter to apply the the delete operation
options
the options to apply to the delete operation
returns
a Observable with a single element the DeleteResult or with an com.mongodb.MongoException
Since
2.2
Note
Requires MongoDB 3.6 or greater
def deleteMany(clientSession: ClientSession, filter: Bson): SingleObservable[DeleteResult]
Removes all documents from the collection that match the given query filter.
Removes all documents from the collection that match the given query filter. If no documents match, the collection is not modified.
clientSession
the client session with which to associate this operation
filter
the query filter to apply the the delete operation
returns
a Observable with a single element the DeleteResult or with an com.mongodb.MongoException
Since
2.2
Note
Requires MongoDB 3.6 or greater
def deleteMany(filter: Bson, options: DeleteOptions): SingleObservable[DeleteResult]
Removes all documents from the collection that match the given query filter.
Removes all documents from the collection that match the given query filter. If no documents match, the collection is not modified.
filter
the query filter to apply the the delete operation
options
the options to apply to the delete operation
returns
a Observable with a single element the DeleteResult or with an com.mongodb.MongoException
Since
1.2
def deleteMany(filter: Bson): SingleObservable[DeleteResult]
Removes all documents from the collection that match the given query filter.
Removes all documents from the collection that match the given query filter. If no documents match, the collection is not modified.
filter
the query filter to apply the the delete operation
returns
a Observable with a single element the DeleteResult or with an com.mongodb.MongoException
def deleteOne(clientSession: ClientSession, filter: Bson, options: DeleteOptions): SingleObservable[DeleteResult]
Removes at most one document from the collection that matches the given filter.
Removes at most one document from the collection that matches the given filter. If no documents match, the collection is not modified.
clientSession
the client session with which to associate this operation
filter
the query filter to apply the the delete operation
options
the options to apply to the delete operation
returns
a Observable with a single element the DeleteResult or with an com.mongodb.MongoException
Since
2.2
Note
Requires MongoDB 3.6 or greater
def deleteOne(clientSession: ClientSession, filter: Bson): SingleObservable[DeleteResult]
Removes at most one document from the collection that matches the given filter.
Removes at most one document from the collection that matches the given filter. If no documents match, the collection is not modified.
clientSession
the client session with which to associate this operation
filter
the query filter to apply the the delete operation
returns
a Observable with a single element the DeleteResult or with an com.mongodb.MongoException
Since
2.2
Note
Requires MongoDB 3.6 or greater
def deleteOne(filter: Bson, options: DeleteOptions): SingleObservable[DeleteResult]
Removes at most one document from the collection that matches the given filter.
Removes at most one document from the collection that matches the given filter. If no documents match, the collection is not modified.
filter
the query filter to apply the the delete operation
options
the options to apply to the delete operation
returns
a Observable with a single element the DeleteResult or with an com.mongodb.MongoException
Since
1.2
def deleteOne(filter: Bson): SingleObservable[DeleteResult]
Removes at most one document from the collection that matches the given filter.
Removes at most one document from the collection that matches the given filter. If no documents match, the collection is not modified.
filter
the query filter to apply the the delete operation
returns
a Observable with a single element the DeleteResult or with an com.mongodb.MongoException
def distinct[C](clientSession: ClientSession, fieldName: String, filter: Bson)(implicit ct: ClassTag[C]): DistinctObservable[C]
Gets the distinct values of the specified field name.
Gets the distinct values of the specified field name.
Distinct
C
the target type of the observable.
clientSession
the client session with which to associate this operation
fieldName
the field name
filter
the query filter
returns
a Observable emitting the sequence of distinct values
Since
2.2
Note
Requires MongoDB 3.6 or greater
def distinct[C](clientSession: ClientSession, fieldName: String)(implicit ct: ClassTag[C]): DistinctObservable[C]
Gets the distinct values of the specified field name.
Gets the distinct values of the specified field name.
Distinct
C
the target type of the observable.
clientSession
the client session with which to associate this operation
fieldName
the field name
returns
a Observable emitting the sequence of distinct values
Since
2.2
Note
Requires MongoDB 3.6 or greater
def distinct[C](fieldName: String, filter: Bson)(implicit ct: ClassTag[C]): DistinctObservable[C]
Gets the distinct values of the specified field name.
Gets the distinct values of the specified field name.
Distinct
C
the target type of the observable.
fieldName
the field name
filter
the query filter
returns
a Observable emitting the sequence of distinct values
def distinct[C](fieldName: String)(implicit ct: ClassTag[C]): DistinctObservable[C]
Gets the distinct values of the specified field name.
Gets the distinct values of the specified field name.
Distinct
C
the target type of the observable.
fieldName
the field name
returns
a Observable emitting the sequence of distinct values
lazy val documentClass: Class[TResult]
Get the default class to cast any documents returned from the database into.
Get the default class to cast any documents returned from the database into.
returns
the default class to cast any documents into
def drop(clientSession: ClientSession): SingleObservable[Void]
Drops this collection from the Database.
Drops this collection from the Database.
clientSession
the client session with which to associate this operation
returns
an empty Observable that indicates when the operation has completed Drop Collection
Since
2.2
Note
Requires MongoDB 3.6 or greater
def drop(): SingleObservable[Void]
Drops this collection from the Database.
Drops this collection from the Database.
returns
an empty Observable that indicates when the operation has completed Drop Collection
def dropIndex(clientSession: ClientSession, keys: Bson, dropIndexOptions: DropIndexOptions): SingleObservable[Void]
Drops the index given the keys used to create it.
Drops the index given the keys used to create it.
clientSession
the client session with which to associate this operation
keys
the keys of the index to remove
dropIndexOptions
options to use when dropping indexes
returns
an empty Observable that indicates when the operation has completed
Since
2.2
Note
Requires MongoDB 3.6 or greater
def dropIndex(clientSession: ClientSession, keys: Bson): SingleObservable[Void]
Drops the index given the keys used to create it.
Drops the index given the keys used to create it.
clientSession
the client session with which to associate this operation
keys
the keys of the index to remove
returns
an empty Observable that indicates when the operation has completed
Since
2.2
Note
Requires MongoDB 3.6 or greater
def dropIndex(clientSession: ClientSession, indexName: String, dropIndexOptions: DropIndexOptions): SingleObservable[Void]
Drops the given index.
Drops the given index.
Drop Indexes
clientSession
the client session with which to associate this operation
indexName
the name of the index to remove
dropIndexOptions
options to use when dropping indexes
returns
an empty Observable that indicates when the operation has completed
Since
2.2
Note
Requires MongoDB 3.6 or greater
def dropIndex(clientSession: ClientSession, indexName: String): SingleObservable[Void]
Drops the given index.
Drops the given index.
Drop Indexes
clientSession
the client session with which to associate this operation
indexName
the name of the index to remove
returns
an empty Observable that indicates when the operation has completed
Since
2.2
Note
Requires MongoDB 3.6 or greater
def dropIndex(keys: Bson, dropIndexOptions: DropIndexOptions): SingleObservable[Void]
Drops the index given the keys used to create it.
Drops the index given the keys used to create it.
keys
the keys of the index to remove
dropIndexOptions
options to use when dropping indexes
returns
an empty Observable that indicates when the operation has completed
Since
2.2
def dropIndex(keys: Bson): SingleObservable[Void]
Drops the index given the keys used to create it.
Drops the index given the keys used to create it.
keys
the keys of the index to remove
returns
an empty Observable that indicates when the operation has completed
def dropIndex(indexName: String, dropIndexOptions: DropIndexOptions): SingleObservable[Void]
Drops the given index.
Drops the given index.
Drop Indexes
indexName
the name of the index to remove
dropIndexOptions
options to use when dropping indexes
returns
an empty Observable that indicates when the operation has completed
Since
2.2
def dropIndex(indexName: String): SingleObservable[Void]
Drops the given index.
Drops the given index.
Drop Indexes
indexName
the name of the index to remove
returns
an empty Observable that indicates when the operation has completed
def dropIndexes(clientSession: ClientSession, dropIndexOptions: DropIndexOptions): SingleObservable[Void]
Drop all the indexes on this collection, except for the default on _id.
Drop all the indexes on this collection, except for the default on _id.
Drop Indexes
clientSession
the client session with which to associate this operation
dropIndexOptions
options to use when dropping indexes
returns
an empty Observable that indicates when the operation has completed
Since
2.2
Note
Requires MongoDB 3.6 or greater
def dropIndexes(clientSession: ClientSession): SingleObservable[Void]
Drop all the indexes on this collection, except for the default on _id.
Drop all the indexes on this collection, except for the default on _id.
Drop Indexes
clientSession
the client session with which to associate this operation
returns
an empty Observable that indicates when the operation has completed
Since
2.2
Note
Requires MongoDB 3.6 or greater
def dropIndexes(dropIndexOptions: DropIndexOptions): SingleObservable[Void]
Drop all the indexes on this collection, except for the default on _id.
Drop all the indexes on this collection, except for the default on _id.
Drop Indexes
dropIndexOptions
options to use when dropping indexes
returns
an empty Observable that indicates when the operation has completed
Since
2.2
def dropIndexes(): SingleObservable[Void]
Drop all the indexes on this collection, except for the default on _id.
Drop all the indexes on this collection, except for the default on _id.
Drop Indexes
returns
an empty Observable that indicates when the operation has completed
final def eq(arg0: AnyRef): Boolean
Definition Classes
AnyRef
def estimatedDocumentCount(options: EstimatedDocumentCountOptions): SingleObservable[Long]
Gets an estimate of the count of documents in a collection using collection metadata.
Gets an estimate of the count of documents in a collection using collection metadata.
options
the options describing the count
returns
a publisher with a single element indicating the estimated number of documents
Since
2.4
def estimatedDocumentCount(): SingleObservable[Long]
Gets an estimate of the count of documents in a collection using collection metadata.
Gets an estimate of the count of documents in a collection using collection metadata.
returns
a publisher with a single element indicating the estimated number of documents
Since
2.4
def find[C](clientSession: ClientSession, filter: Bson)(implicit e: DefaultsTo[C, TResult], ct: ClassTag[C]): FindObservable[C]
Finds all documents in the collection.
Finds all documents in the collection.
Find
C
the target document type of the observable.
clientSession
the client session with which to associate this operation
filter
the query filter
returns
the find Observable
Since
2.2
Note
Requires MongoDB 3.6 or greater
def find[C](clientSession: ClientSession)(implicit e: DefaultsTo[C, TResult], ct: ClassTag[C]): FindObservable[C]
Finds all documents in the collection.
Finds all documents in the collection.
Find
C
the target document type of the observable.
clientSession
the client session with which to associate this operation
returns
the find Observable
Since
2.2
Note
Requires MongoDB 3.6 or greater
def find[C](filter: Bson)(implicit e: DefaultsTo[C, TResult], ct: ClassTag[C]): FindObservable[C]
Finds all documents in the collection.
Finds all documents in the collection.
Find
C
the target document type of the observable.
filter
the query filter
returns
the find Observable
def find[C]()(implicit e: DefaultsTo[C, TResult], ct: ClassTag[C]): FindObservable[C]
Finds all documents in the collection.
Finds all documents in the collection.
Find
C
the target document type of the observable.
returns
the find Observable
def findOneAndDelete(clientSession: ClientSession, filter: Bson, options: FindOneAndDeleteOptions): SingleObservable[TResult]
Atomically find a document and remove it.
Atomically find a document and remove it.
clientSession
the client session with which to associate this operation
filter
the query filter to find the document with
options
the options to apply to the operation
returns
a Observable with a single element the document that was removed. If no documents matched the query filter, then null will be returned
Since
2.2
Note
Requires MongoDB 3.6 or greater
def findOneAndDelete(clientSession: ClientSession, filter: Bson): SingleObservable[TResult]
Atomically find a document and remove it.
Atomically find a document and remove it.
clientSession
the client session with which to associate this operation
filter
the query filter to find the document with
returns
a Observable with a single element the document that was removed. If no documents matched the query filter, then null will be returned
Since
2.2
Note
Requires MongoDB 3.6 or greater
def findOneAndDelete(filter: Bson, options: FindOneAndDeleteOptions): SingleObservable[TResult]
Atomically find a document and remove it.
Atomically find a document and remove it.
filter
the query filter to find the document with
options
the options to apply to the operation
returns
a Observable with a single element the document that was removed. If no documents matched the query filter, then null will be returned
def findOneAndDelete(filter: Bson): SingleObservable[TResult]
Atomically find a document and remove it.
Atomically find a document and remove it.
filter
the query filter to find the document with
returns
a Observable with a single element the document that was removed. If no documents matched the query filter, then null will be returned
def findOneAndReplace(clientSession: ClientSession, filter: Bson, replacement: TResult, options: FindOneAndReplaceOptions): SingleObservable[TResult]
Atomically find a document and replace it.
Atomically find a document and replace it.
clientSession
the client session with which to associate this operation
filter
the query filter to apply the the replace operation
replacement
the replacement document
options
the options to apply to the operation
returns
a Observable with a single element the document that was replaced. Depending on the value of the returnOriginal property, this will either be the document as it was before the update or as it is after the update. If no documents matched the query filter, then null will be returned
Since
2.2
Note
Requires MongoDB 3.6 or greater
def findOneAndReplace(clientSession: ClientSession, filter: Bson, replacement: TResult): SingleObservable[TResult]
Atomically find a document and replace it.
Atomically find a document and replace it.
clientSession
the client session with which to associate this operation
filter
the query filter to apply the the replace operation
replacement
the replacement document
returns
a Observable with a single element the document that was replaced. Depending on the value of the returnOriginal property, this will either be the document as it was before the update or as it is after the update. If no documents matched the query filter, then null will be returned
Since
2.2
Note
Requires MongoDB 3.6 or greater
def findOneAndReplace(filter: Bson, replacement: TResult, options: FindOneAndReplaceOptions): SingleObservable[TResult]
Atomically find a document and replace it.
Atomically find a document and replace it.
filter
the query filter to apply the the replace operation
replacement
the replacement document
options
the options to apply to the operation
returns
a Observable with a single element the document that was replaced. Depending on the value of the returnOriginal property, this will either be the document as it was before the update or as it is after the update. If no documents matched the query filter, then null will be returned
def findOneAndReplace(filter: Bson, replacement: TResult): SingleObservable[TResult]
Atomically find a document and replace it.
Atomically find a document and replace it.
filter
the query filter to apply the the replace operation
replacement
the replacement document
returns
a Observable with a single element the document that was replaced. Depending on the value of the returnOriginal property, this will either be the document as it was before the update or as it is after the update. If no documents matched the query filter, then null will be returned
def findOneAndUpdate(clientSession: ClientSession, filter: Bson, update: Seq[Bson], options: FindOneAndUpdateOptions): SingleObservable[TResult]
Atomically find a document and update it.
Atomically find a document and update it.
clientSession
the client session with which to associate this operation
filter
a document describing the query filter, which may not be null. This can be of any type for which a Codec is registered
update
a pipeline describing the update.
options
the options to apply to the operation
returns
a Observable with a single element the document that was updated. Depending on the value of the returnOriginal property, this will either be the document as it was before the update or as it is after the update. If no documents matched the query filter, then null will be returned
Since
2.7
Note
Requires MongoDB 4.2 or greater
def findOneAndUpdate(clientSession: ClientSession, filter: Bson, update: Seq[Bson]): SingleObservable[TResult]
Atomically find a document and update it.
Atomically find a document and update it.
clientSession
the client session with which to associate this operation
filter
a document describing the query filter, which may not be null. This can be of any type for which a Codec is registered
update
a pipeline describing the update.
returns
a Observable with a single element the document that was updated. Depending on the value of the returnOriginal property, this will either be the document as it was before the update or as it is after the update. If no documents matched the query filter, then null will be returned
Since
2.7
Note
Requires MongoDB 4.2 or greater
def findOneAndUpdate(filter: Bson, update: Seq[Bson], options: FindOneAndUpdateOptions): SingleObservable[TResult]
Atomically find a document and update it.
Atomically find a document and update it.
filter
a document describing the query filter, which may not be null. This can be of any type for which a Codec is registered
update
a pipeline describing the update.
options
the options to apply to the operation
returns
a Observable with a single element the document that was updated. Depending on the value of the returnOriginal property, this will either be the document as it was before the update or as it is after the update. If no documents matched the query filter, then null will be returned
Since
2.7
Note
Requires MongoDB 4.2 or greater
def findOneAndUpdate(filter: Bson, update: Seq[Bson]): SingleObservable[TResult]
Atomically find a document and update it.
Atomically find a document and update it.
filter
a document describing the query filter, which may not be null. This can be of any type for which a Codec is registered
update
a pipeline describing the update.
returns
a Observable with a single element the document that was updated. Depending on the value of the returnOriginal property, this will either be the document as it was before the update or as it is after the update. If no documents matched the query filter, then null will be returned
Since
2.7
Note
Requires MongoDB 4.2 or greater
def findOneAndUpdate(clientSession: ClientSession, filter: Bson, update: Bson, options: FindOneAndUpdateOptions): SingleObservable[TResult]
Atomically find a document and update it.
Atomically find a document and update it.
clientSession
the client session with which to associate this operation
filter
a document describing the query filter, which may not be null. This can be of any type for which a Codec is registered
update
a document describing the update, which may not be null. The update to apply must include only update operators. This can be of any type for which a Codec is registered
options
the options to apply to the operation
returns
a Observable with a single element the document that was updated. Depending on the value of the returnOriginal property, this will either be the document as it was before the update or as it is after the update. If no documents matched the query filter, then null will be returned
Since
2.2
Note
Requires MongoDB 3.6 or greater
def findOneAndUpdate(clientSession: ClientSession, filter: Bson, update: Bson): SingleObservable[TResult]
Atomically find a document and update it.
Atomically find a document and update it.
clientSession
the client session with which to associate this operation
filter
a document describing the query filter, which may not be null. This can be of any type for which a Codec is registered
update
a document describing the update, which may not be null. The update to apply must include only update operators. This can be of any type for which a Codec is registered
returns
a Observable with a single element the document that was updated. Depending on the value of the returnOriginal property, this will either be the document as it was before the update or as it is after the update. If no documents matched the query filter, then null will be returned
Since
2.2
Note
Requires MongoDB 3.6 or greater
def findOneAndUpdate(filter: Bson, update: Bson, options: FindOneAndUpdateOptions): SingleObservable[TResult]
Atomically find a document and update it.
Atomically find a document and update it.
filter
a document describing the query filter, which may not be null. This can be of any type for which a Codec is registered
update
a document describing the update, which may not be null. The update to apply must include only update operators. This can be of any type for which a Codec is registered
options
the options to apply to the operation
returns
a Observable with a single element the document that was updated. Depending on the value of the returnOriginal property, this will either be the document as it was before the update or as it is after the update. If no documents matched the query filter, then null will be returned
def findOneAndUpdate(filter: Bson, update: Bson): SingleObservable[TResult]
Atomically find a document and update it.
Atomically find a document and update it.
filter
a document describing the query filter, which may not be null. This can be of any type for which a Codec is registered
update
a document describing the update, which may not be null. The update to apply must include only update operators. This can be of any type for which a Codec is registered
returns
a Observable with a single element the document that was updated. Depending on the value of the returnOriginal property, this will either be the document as it was before the update or as it is after the update. If no documents matched the query filter, then null will be returned
final def getClass(): Class[_ <: AnyRef]
Definition Classes
AnyRef → Any
Annotations
@native() @HotSpotIntrinsicCandidate()
def insertMany(clientSession: ClientSession, documents: Seq[_ <: TResult], options: InsertManyOptions): SingleObservable[InsertManyResult]
Inserts a batch of documents.
Inserts a batch of documents. The preferred way to perform bulk inserts is to use the BulkWrite API.
clientSession
the client session with which to associate this operation
documents
the documents to insert
options
the options to apply to the operation
returns
a Observable with a single element the InsertManyResult or with either a com.mongodb.DuplicateKeyException or com.mongodb.MongoExceptionn
Since
2.2
Note
Requires MongoDB 3.6 or greater
def insertMany(clientSession: ClientSession, documents: Seq[_ <: TResult]): SingleObservable[InsertManyResult]
Inserts a batch of documents.
Inserts a batch of documents. The preferred way to perform bulk inserts is to use the BulkWrite API.
clientSession
the client session with which to associate this operation
documents
the documents to insert
returns
a Observable with a single element the InsertManyResult or with either a com.mongodb.DuplicateKeyException or com.mongodb.MongoException
Since
2.2
Note
Requires MongoDB 3.6 or greater
def insertMany(documents: Seq[_ <: TResult], options: InsertManyOptions): SingleObservable[InsertManyResult]
Inserts a batch of documents.
Inserts a batch of documents. The preferred way to perform bulk inserts is to use the BulkWrite API. However, when talking with a server < 2.6, using this method will be faster due to constraints in the bulk API related to error handling.
documents
the documents to insert
options
the options to apply to the operation
returns
a Observable with a single element the InsertManyResult or with either a com.mongodb.DuplicateKeyException or com.mongodb.MongoException
def insertMany(documents: Seq[_ <: TResult]): SingleObservable[InsertManyResult]
Inserts a batch of documents.
Inserts a batch of documents. The preferred way to perform bulk inserts is to use the BulkWrite API. However, when talking with a server < 2.6, using this method will be faster due to constraints in the bulk API related to error handling.
documents
the documents to insert
returns
a Observable with a single element the InsertManyResult or with either a com.mongodb.DuplicateKeyException or com.mongodb.MongoException
def insertOne(clientSession: ClientSession, document: TResult, options: InsertOneOptions): SingleObservable[InsertOneResult]
Inserts the provided document.
Inserts the provided document. If the document is missing an identifier, the driver should generate one.
clientSession
the client session with which to associate this operation
document
the document to insert
options
the options to apply to the operation
returns
a Observable with a single element the InsertOneResult or with either a com.mongodb.DuplicateKeyException or com.mongodb.MongoException
Since
2.2
Note
Requires MongoDB 3.6 or greater
def insertOne(clientSession: ClientSession, document: TResult): SingleObservable[InsertOneResult]
Inserts the provided document.
Inserts the provided document. If the document is missing an identifier, the driver should generate one.
clientSession
the client session with which to associate this operation
document
the document to insert
returns
a Observable with a single element the InsertOneResult or with either a com.mongodb.DuplicateKeyException or com.mongodb.MongoException
Since
2.2
Note
Requires MongoDB 3.6 or greater
def insertOne(document: TResult, options: InsertOneOptions): SingleObservable[InsertOneResult]
Inserts the provided document.
Inserts the provided document. If the document is missing an identifier, the driver should generate one.
document
the document to insert
options
the options to apply to the operation
returns
a Observable with a single element the InsertOneResult or with either a com.mongodb.DuplicateKeyException or com.mongodb.MongoException
Since
1.1
def insertOne(document: TResult): SingleObservable[InsertOneResult]
Inserts the provided document.
Inserts the provided document. If the document is missing an identifier, the driver should generate one.
document
the document to insert
returns
a Observable with a single element the InsertOneResult or with either a com.mongodb.DuplicateKeyException or com.mongodb.MongoException
final def isInstanceOf[T0]: Boolean
Definition Classes
Any
def listIndexes[C](clientSession: ClientSession)(implicit e: DefaultsTo[C, Document], ct: ClassTag[C]): ListIndexesObservable[C]
Get all the indexes in this collection.
Get all the indexes in this collection.
listIndexes
C
the target document type of the observable.
clientSession
the client session with which to associate this operation
returns
the fluent list indexes interface
Since
2.2
Note
Requires MongoDB 3.6 or greater
def listIndexes[C]()(implicit e: DefaultsTo[C, Document], ct: ClassTag[C]): ListIndexesObservable[C]
Get all the indexes in this collection.
Get all the indexes in this collection.
listIndexes
C
the target document type of the observable.
returns
the fluent list indexes interface
def mapReduce[C](clientSession: ClientSession, mapFunction: String, reduceFunction: String)(implicit e: DefaultsTo[C, TResult], ct: ClassTag[C]): MapReduceObservable[C]
Aggregates documents according to the specified map-reduce function.
Aggregates documents according to the specified map-reduce function.
C
the target document type of the observable.
clientSession
the client session with which to associate this operation
mapFunction
A JavaScript function that associates or "maps" a value with a key and emits the key and value pair.
reduceFunction
A JavaScript function that "reduces" to a single object all the values associated with a particular key.
returns
a Observable containing the result of the map-reduce operation map-reduce
Since
2.2
Note
Requires MongoDB 3.6 or greater
def mapReduce[C](mapFunction: String, reduceFunction: String)(implicit e: DefaultsTo[C, TResult], ct: ClassTag[C]): MapReduceObservable[C]
Aggregates documents according to the specified map-reduce function.
Aggregates documents according to the specified map-reduce function.
C
the target document type of the observable.
mapFunction
A JavaScript function that associates or "maps" a value with a key and emits the key and value pair.
reduceFunction
A JavaScript function that "reduces" to a single object all the values associated with a particular key.
returns
a Observable containing the result of the map-reduce operation map-reduce
lazy val namespace: MongoNamespace
Gets the namespace of this collection.
Gets the namespace of this collection.
returns
the namespace
final def ne(arg0: AnyRef): Boolean
Definition Classes
AnyRef
final def notify(): Unit
Definition Classes
AnyRef
Annotations
@native() @HotSpotIntrinsicCandidate()
final def notifyAll(): Unit
Definition Classes
AnyRef
Annotations
@native() @HotSpotIntrinsicCandidate()
def productElementNames: Iterator[String]
Definition Classes
Product
lazy val readConcern: ReadConcern
Get the read concern for the MongoDatabase.
Get the read concern for the MongoDatabase.
returns
the ReadConcern
Since
1.1
lazy val readPreference: ReadPreference
Get the read preference for the MongoDatabase.
Get the read preference for the MongoDatabase.
returns
the { @link com.mongodb.ReadPreference}
def renameCollection(clientSession: ClientSession, newCollectionNamespace: MongoNamespace, options: RenameCollectionOptions): SingleObservable[Void]
Rename the collection with oldCollectionName to the newCollectionName.
Rename the collection with oldCollectionName to the newCollectionName.
Rename collection
clientSession
the client session with which to associate this operation
newCollectionNamespace
the name the collection will be renamed to
options
the options for renaming a collection
returns
an empty Observable that indicates when the operation has completed
Since
2.2
Note
Requires MongoDB 3.6 or greater
def renameCollection(clientSession: ClientSession, newCollectionNamespace: MongoNamespace): SingleObservable[Void]
Rename the collection with oldCollectionName to the newCollectionName.
Rename the collection with oldCollectionName to the newCollectionName.
Rename collection
clientSession
the client session with which to associate this operation
newCollectionNamespace
the name the collection will be renamed to
returns
an empty Observable that indicates when the operation has completed
Since
2.2
Note
Requires MongoDB 3.6 or greater
def renameCollection(newCollectionNamespace: MongoNamespace, options: RenameCollectionOptions): SingleObservable[Void]
Rename the collection with oldCollectionName to the newCollectionName.
Rename the collection with oldCollectionName to the newCollectionName.
Rename collection
newCollectionNamespace
the name the collection will be renamed to
options
the options for renaming a collection
returns
an empty Observable that indicates when the operation has completed
def renameCollection(newCollectionNamespace: MongoNamespace): SingleObservable[Void]
Rename the collection with oldCollectionName to the newCollectionName.
Rename the collection with oldCollectionName to the newCollectionName.
Rename collection
newCollectionNamespace
the name the collection will be renamed to
returns
an empty Observable that indicates when the operation has completed
def replaceOne(clientSession: ClientSession, filter: Bson, replacement: TResult, options: ReplaceOptions): SingleObservable[UpdateResult]
Replace a document in the collection according to the specified arguments.
Replace a document in the collection according to the specified arguments.
Replace
clientSession
the client session with which to associate this operation
filter
the query filter to apply the the replace operation
replacement
the replacement document
options
the options to apply to the replace operation
returns
a Observable with a single element the UpdateResult
Since
2.2
Note
Requires MongoDB 3.6 or greater
def replaceOne(filter: Bson, replacement: TResult, options: ReplaceOptions): SingleObservable[UpdateResult]
Replace a document in the collection according to the specified arguments.
Replace a document in the collection according to the specified arguments.
Replace
filter
the query filter to apply the the replace operation
replacement
the replacement document
options
the options to apply to the replace operation
returns
a Observable with a single element the UpdateResult
def replaceOne(clientSession: ClientSession, filter: Bson, replacement: TResult): SingleObservable[UpdateResult]
Replace a document in the collection according to the specified arguments.
Replace a document in the collection according to the specified arguments.
Replace
clientSession
the client session with which to associate this operation
filter
the query filter to apply the the replace operation
replacement
the replacement document
returns
a Observable with a single element the UpdateResult
Since
2.2
Note
Requires MongoDB 3.6 or greater
def replaceOne(filter: Bson, replacement: TResult): SingleObservable[UpdateResult]
Replace a document in the collection according to the specified arguments.
Replace a document in the collection according to the specified arguments.
Replace
filter
the query filter to apply the the replace operation
replacement
the replacement document
returns
a Observable with a single element the UpdateResult
final def synchronized[T0](arg0: => T0): T0
Definition Classes
AnyRef
def updateMany(clientSession: ClientSession, filter: Bson, update: Seq[Bson], options: UpdateOptions): SingleObservable[UpdateResult]
Update all documents in the collection according to the specified arguments.
Update all documents in the collection according to the specified arguments.
Updates Update Operators
clientSession
the client session with which to associate this operation
filter
a document describing the query filter, which may not be null. This can be of any type for which a Codec is registered
update
a pipeline describing the update.
options
the options to apply to the update operation
returns
a Observable with a single element the UpdateResult
Since
2.7
Note
Requires MongoDB 4.2 or greater
def updateMany(clientSession: ClientSession, filter: Bson, update: Seq[Bson]): SingleObservable[UpdateResult]
Update all documents in the collection according to the specified arguments.
Update all documents in the collection according to the specified arguments.
Updates Update Operators
clientSession
the client session with which to associate this operation
filter
a document describing the query filter, which may not be null. This can be of any type for which a Codec is registered
update
a pipeline describing the update.
returns
a Observable with a single element the UpdateResult
Since
2.7
Note
Requires MongoDB 4.2 or greater
def updateMany(filter: Bson, update: Seq[Bson], options: UpdateOptions): SingleObservable[UpdateResult]
Update all documents in the collection according to the specified arguments.
Update all documents in the collection according to the specified arguments.
Updates Update Operators
filter
a document describing the query filter, which may not be null. This can be of any type for which a Codec is registered
update
a pipeline describing the update.
options
the options to apply to the update operation
returns
a Observable with a single element the UpdateResult
Since
2.7
Note
Requires MongoDB 4.2 or greater
def updateMany(filter: Bson, update: Seq[Bson]): SingleObservable[UpdateResult]
Update all documents in the collection according to the specified arguments.
Update all documents in the collection according to the specified arguments.
Updates Update Operators
filter
a document describing the query filter, which may not be null. This can be of any type for which a Codec is registered
update
a pipeline describing the update.
returns
a Observable with a single element the UpdateResult
Since
2.7
Note
Requires MongoDB 4.2 or greater
def updateMany(clientSession: ClientSession, filter: Bson, update: Bson, options: UpdateOptions): SingleObservable[UpdateResult]
Update all documents in the collection according to the specified arguments.
Update all documents in the collection according to the specified arguments.
Updates Update Operators
clientSession
the client session with which to associate this operation
filter
a document describing the query filter, which may not be null. This can be of any type for which a Codec is registered
update
a document describing the update, which may not be null. The update to apply must include only update operators. This can be of any type for which a Codec is registered
options
the options to apply to the update operation
returns
a Observable with a single element the UpdateResult
Since
2.2
Note
Requires MongoDB 3.6 or greater
def updateMany(clientSession: ClientSession, filter: Bson, update: Bson): SingleObservable[UpdateResult]
Update all documents in the collection according to the specified arguments.
Update all documents in the collection according to the specified arguments.
Updates Update Operators
clientSession
the client session with which to associate this operation
filter
a document describing the query filter, which may not be null. This can be of any type for which a Codec is registered
update
a document describing the update, which may not be null. The update to apply must include only update operators. This can be of any type for which a Codec is registered
returns
a Observable with a single element the UpdateResult
Since
2.2
Note
Requires MongoDB 3.6 or greater
def updateMany(filter: Bson, update: Bson, options: UpdateOptions): SingleObservable[UpdateResult]
Update all documents in the collection according to the specified arguments.
Update all documents in the collection according to the specified arguments.
Updates Update Operators
filter
a document describing the query filter, which may not be null. This can be of any type for which a Codec is registered
update
a document describing the update, which may not be null. The update to apply must include only update operators. This can be of any type for which a Codec is registered
options
the options to apply to the update operation
returns
a Observable with a single element the UpdateResult
def updateMany(filter: Bson, update: Bson): SingleObservable[UpdateResult]
Update all documents in the collection according to the specified arguments.
Update all documents in the collection according to the specified arguments.
Updates Update Operators
filter
a document describing the query filter, which may not be null. This can be of any type for which a Codec is registered
update
a document describing the update, which may not be null. The update to apply must include only update operators. This can be of any type for which a Codec is registered
returns
a Observable with a single element the UpdateResult
def updateOne(clientSession: ClientSession, filter: Bson, update: Seq[Bson], options: UpdateOptions): SingleObservable[UpdateResult]
Update a single document in the collection according to the specified arguments.
Update a single document in the collection according to the specified arguments.
Updates Update Operators
clientSession
the client session with which to associate this operation
filter
a document describing the query filter, which may not be null. This can be of any type for which a Codec is registered
update
a pipeline describing the update.
options
the options to apply to the update operation
returns
a Observable with a single element the UpdateResult
Since
2.7
Note
Requires MongoDB 4.2 or greater
def updateOne(clientSession: ClientSession, filter: Bson, update: Seq[Bson]): SingleObservable[UpdateResult]
Update a single document in the collection according to the specified arguments.
Update a single document in the collection according to the specified arguments.
Updates Update Operators
clientSession
the client session with which to associate this operation
filter
a document describing the query filter, which may not be null. This can be of any type for which a Codec is registered
update
a pipeline describing the update.
returns
a Observable with a single element the UpdateResult
Since
2.7
Note
Requires MongoDB 4.2 or greater
def updateOne(filter: Bson, update: Seq[Bson], options: UpdateOptions): SingleObservable[UpdateResult]
Update a single document in the collection according to the specified arguments.
Update a single document in the collection according to the specified arguments.
Updates Update Operators
filter
a document describing the query filter, which may not be null. This can be of any type for which a Codec is registered
update
a pipeline describing the update.
options
the options to apply to the update operation
returns
a Observable with a single element the UpdateResult
Since
2.7
Note
Requires MongoDB 4.2 or greater
def updateOne(filter: Bson, update: Seq[Bson]): SingleObservable[UpdateResult]
Update a single document in the collection according to the specified arguments.
Update a single document in the collection according to the specified arguments.
Updates Update Operators
filter
a document describing the query filter, which may not be null. This can be of any type for which a Codec is registered
update
a pipeline describing the update.
returns
a Observable with a single element the UpdateResult
Since
2.7
Note
Requires MongoDB 4.2 or greater
def updateOne(clientSession: ClientSession, filter: Bson, update: Bson, options: UpdateOptions): SingleObservable[UpdateResult]
Update a single document in the collection according to the specified arguments.
Update a single document in the collection according to the specified arguments.
Updates Update Operators
clientSession
the client session with which to associate this operation
filter
a document describing the query filter, which may not be null. This can be of any type for which a Codec is registered
update
a document describing the update, which may not be null. The update to apply must include only update operators. This can be of any type for which a Codec is registered
options
the options to apply to the update operation
returns
a Observable with a single element the UpdateResult
Since
2.2
Note
Requires MongoDB 3.6 or greater
def updateOne(clientSession: ClientSession, filter: Bson, update: Bson): SingleObservable[UpdateResult]
Update a single document in the collection according to the specified arguments.
Update a single document in the collection according to the specified arguments.
Updates Update Operators
clientSession
the client session with which to associate this operation
filter
a document describing the query filter, which may not be null. This can be of any type for which a Codec is registered
update
a document describing the update, which may not be null. The update to apply must include only update operators. This can be of any type for which a Codec is registered
returns
a Observable with a single element the UpdateResult
Since
2.2
Note
Requires MongoDB 3.6 or greater
def updateOne(filter: Bson, update: Bson, options: UpdateOptions): SingleObservable[UpdateResult]
Update a single document in the collection according to the specified arguments.
Update a single document in the collection according to the specified arguments.
Updates Update Operators
filter
a document describing the query filter, which may not be null. This can be of any type for which a Codec is registered
update
a document describing the update, which may not be null. The update to apply must include only update operators. This can be of any type for which a Codec is registered
options
the options to apply to the update operation
returns
a Observable with a single element the UpdateResult
def updateOne(filter: Bson, update: Bson): SingleObservable[UpdateResult]
Update a single document in the collection according to the specified arguments.
Update a single document in the collection according to the specified arguments.
Updates Update Operators
filter
a document describing the query filter, which may not be null. This can be of any type for which a Codec is registered
update
a document describing the update, which may not be null. The update to apply must include only update operators. This can be of any type for which a Codec is registered
returns
a Observable with a single element the UpdateResult
final def wait(arg0: Long, arg1: Int): Unit
Definition Classes
AnyRef
Annotations
@throws(classOf[java.lang.InterruptedException])
final def wait(arg0: Long): Unit
Definition Classes
AnyRef
Annotations
@throws(classOf[java.lang.InterruptedException]) @native()
final def wait(): Unit
Definition Classes
AnyRef
Annotations
@throws(classOf[java.lang.InterruptedException])
def watch[C](clientSession: ClientSession, pipeline: Seq[Bson])(implicit e: DefaultsTo[C, TResult], ct: ClassTag[C]): ChangeStreamObservable[C]
Creates a change stream for this collection.
Creates a change stream for this collection.
C
the target document type of the observable.
clientSession
the client session with which to associate this operation
pipeline
the aggregation pipeline to apply to the change stream
returns
the change stream observable
Since
2.2
Note
Requires MongoDB 3.6 or greater
def watch[C](clientSession: ClientSession)(implicit e: DefaultsTo[C, TResult], ct: ClassTag[C]): ChangeStreamObservable[C]
Creates a change stream for this collection.
Creates a change stream for this collection.
C
the target document type of the observable.
clientSession
the client session with which to associate this operation
returns
the change stream observable
Since
2.2
Note
Requires MongoDB 3.6 or greater
def watch[C](pipeline: Seq[Bson])(implicit e: DefaultsTo[C, TResult], ct: ClassTag[C]): ChangeStreamObservable[C]
Creates a change stream for this collection.
Creates a change stream for this collection.
C
the target document type of the observable.
pipeline
the aggregation pipeline to apply to the change stream
returns
the change stream observable
Since
2.2
Note
Requires MongoDB 3.6 or greater
def watch[C]()(implicit e: DefaultsTo[C, TResult], ct: ClassTag[C]): ChangeStreamObservable[C]
Creates a change stream for this collection.
Creates a change stream for this collection.
C
the target document type of the observable.
returns
the change stream observable
Since
2.2
Note
Requires MongoDB 3.6 or greater
def withCodecRegistry(codecRegistry: CodecRegistry): MongoCollection[TResult]
Create a new MongoCollection instance with a different codec registry.
Create a new MongoCollection instance with a different codec registry.
codecRegistry
the new { @link org.bson.codecs.configuration.CodecRegistry} for the collection
returns
a new MongoCollection instance with the different codec registry
def withDocumentClass[C]()(implicit e: DefaultsTo[C, Document], ct: ClassTag[C]): MongoCollection[C]
Create a new MongoCollection instance with a different default class to cast any documents returned from the database into..
Create a new MongoCollection instance with a different default class to cast any documents returned from the database into..
C
The type that the new collection will encode documents from and decode documents to
returns
a new MongoCollection instance with the different default class
def withReadConcern(readConcern: ReadConcern): MongoCollection[TResult]
Create a new MongoCollection instance with a different read concern.
Create a new MongoCollection instance with a different read concern.
readConcern
the new ReadConcern for the collection
returns
a new MongoCollection instance with the different ReadConcern
Since
1.1
def withReadPreference(readPreference: ReadPreference): MongoCollection[TResult]
Create a new MongoCollection instance with a different read preference.
Create a new MongoCollection instance with a different read preference.
readPreference
the new { @link com.mongodb.ReadPreference} for the collection
returns
a new MongoCollection instance with the different readPreference
def withWriteConcern(writeConcern: WriteConcern): MongoCollection[TResult]
Create a new MongoCollection instance with a different write concern.
Create a new MongoCollection instance with a different write concern.
writeConcern
the new { @link com.mongodb.WriteConcern} for the collection
returns
a new MongoCollection instance with the different writeConcern
lazy val writeConcern: WriteConcern
Get the write concern for the MongoDatabase.
Get the write concern for the MongoDatabase.
returns
the { @link com.mongodb.WriteConcern}

Deprecated Value Members

def finalize(): Unit
Attributes
protected[lang]
Definition Classes
AnyRef
Annotations
@throws(classOf[java.lang.Throwable]) @Deprecated
Deprecated

Packages

Driver structure

MongoCollection

case class MongoCollection[TResult](wrapped: com.mongodb.reactivestreams.client.MongoCollection[TResult]) extends Product with Serializable

Instance Constructors

Value Members

Deprecated Value Members

Inherited from Serializable

Inherited from Product

Inherited from Equals

Inherited from AnyRef

Inherited from Any

Ungrouped

Packages

Driver structure

MongoCollection

case class MongoCollection[TResult](wrapped: com.mongodb.reactivestreams.client.MongoCollection[TResult]) extends Product with Serializable

Instance Constructors

Value Members

Deprecated Value Members

Inherited from Serializable

Inherited from Product

Inherited from Equals

Inherited from AnyRef

Inherited from Any

Ungrouped

MongoCollection