Mongo Scala Driver - org.mongodb.scala.ObservableImplicits.ScalaObservable

final def !=(arg0: Any): Boolean

Definition Classes: AnyRef → Any

final def ##(): Int

Definition Classes: AnyRef → Any

final def ==(arg0: Any): Boolean

Definition Classes: AnyRef → Any

def andThen[U](pf: PartialFunction[Try[T], U]): Observable[T]

Applies the side-effecting function to the final result of this Observable and, returns a new Observable with the result of this Observable.

This method allows one to enforce that the callbacks are executed in a specified order.

Note that if one of the chained andThen callbacks throws an exception, that exception is not propagated to the subsequent andThen callbacks. Instead, the subsequent andThen callbacks are given the original value of this Observable.

The following example prints out 10:

Observable(1 to 10) andThen {
 case r => sys.error("runtime exception")
} andThen {
 case Success(x) => print(x)
 case Failure(t) => print("Failure")
}

U: the result type of the
pf: the partial function to pattern match against
returns: an

final def asInstanceOf[T0]: T0

Definition Classes: Any

def clone(): AnyRef

Attributes: protected[java.lang]
Definition Classes: AnyRef
Annotations: @throws( ... )

def collect[S](): SingleObservable[Seq[T]]

Collects all the values of the Observable into a list and returns a new Observable with that list.

Example:

val listOfNumbers = Observable(1 to 100).collect()

returns: an Observable that emits a single item, the result of accumulator.

Note: If the Observable is large then this will consume lots of memory! If the underlying Observable is infinite this Observable will never complete.
See also: Uses foldLeft underneath

final def eq(arg0: AnyRef): Boolean

Definition Classes: AnyRef

def equals(arg0: Any): Boolean

Definition Classes: AnyRef → Any

def fallbackTo[U >: T](that: Observable[U]): Observable[U]

Creates a new Observable which returns the results of this Observable, if there is an error, it will then fallback to returning the results of the alternative "that" Observable.

If both Observables fail, the resulting Observable holds the throwable object of the first Observable.

Example:

val fallBackObservable = Observable(1 to 100) fallbackTo Observable(200 to 300)

Ensuring results from a Single Observer

fallbackTo can potentially emit results from either Observer. This often isn't desirable, so to ensure only a single Observable issues results combine with the collect method eg:

val results = Observable(1 to 100).collect() fallbackTo Observable(200 to 300).collect()

U: the type of the returned Observable
that: the Observable to fallback to if this Observable fails
returns: an Observable that will fallback to the that Observable should this Observable complete with an onError.

def filter(predicate: (T) ⇒ Boolean): Observable[T]

Creates a new Observable by filtering the value of the current Observable with a predicate.

If the current Observable fails, then the resulting Observable also fails.

Example:

val oddValues = Observable(1 to 100) filter { _ % 2 == 1 }

predicate: the function that is applied to each result emitted if it matches that result is passes to the returned Observable
returns: an Observable only containing items matching that match the predicate

def finalize(): Unit

Attributes: protected[java.lang]
Definition Classes: AnyRef
Annotations: @throws( classOf[java.lang.Throwable] )

def flatMap[S](mapFunction: (T) ⇒ Observable[S]): Observable[S]

Creates a new Observable by applying a function to each emitted result of the Observable.

Creates a new Observable by applying a function to each emitted result of the Observable. If the Observable calls errors then then the new Observable will also contain this exception.

As each emitted item passed to onNext returns an Observable, we tightly control the requests to the parent Observable. The requested amount is then passed to the child Observable and only when that is completed does the parent become available for requesting more data.

Example:

def f = Observable(1 to 10)
def g = Observable(100 to 100)
val h = for {
  x: Int <- f // returns Observable(1 to 10)
  y: Int <- g // returns Observable(100 to 100)
} yield x + y

is translated to:

f flatMap { (x: Int) => g map { (y: Int) => x + y } }

S: the resulting type of each item in the Observable
mapFunction: function that transforms a each result of the receiver into an Observable and passes each result of that Observable to the returned Observable.
returns: an Observable with transformed results and / or error.

def foldLeft[S](initialValue: S)(accumulator: (S, T) ⇒ S): SingleObservable[S]

Creates a new Observable that contains the single result of the applied accumulator function.

The first item emitted by the Observable is passed to the supplied accumulator function alongside the initial value, then all other emitted items are passed along with the previous result of the accumulator function.

Example:

val countingObservable = Observable(1 to 100) foldLeft(0)((v, i) => v + 1)

initialValue: the initial (seed) accumulator value
accumulator: an accumulator function to be invoked on each item emitted by the source Observable, the result of which will be used in the next accumulator call.
returns: an Observable that emits a single item, the result of accumulator.

Note: If this function is used to collect results into a collection then it could use lots of memory! If the underlying Observable is infinite this Observable will never complete.

def foreach[U](doOnEach: (T) ⇒ U): Unit

Applies a function applied to each emitted result.

Automatically requests all results

U: the resulting type after the transformation
doOnEach: the anonymous function applied to each emitted item

final def getClass(): Class[_]

Definition Classes: AnyRef → Any

def hashCode(): Int

Definition Classes: AnyRef → Any

def head(): Future[T]

Returns the head of the Observable in a scala.concurrent.Future.

returns: the head result of the Observable.

final def isInstanceOf[T0]: Boolean

Definition Classes: Any

def map[S](mapFunction: (T) ⇒ S): Observable[S]

Creates a new Observable by applying a function to each emitted result of the Observable.

Creates a new Observable by applying a function to each emitted result of the Observable. If the Observable calls errors then then the new Observable will also contain this exception.

Example:

def f = Observable(1 to 10)
def g = Observable(100 to 100)
val h = for {
  x: Int <- f // returns Observable(1 to 10)
  y: Int <- g // returns Observable(100 to 100)
} yield x + y

is translated to:

f flatMap { (x: Int) => g map { (y: Int) => x + y } }

S: the resulting type of each item in the Observable
mapFunction: function that transforms a each result of the receiver and passes the result to the returned Observable
returns: an Observable with transformed results and / or error.

final def ne(arg0: AnyRef): Boolean

Definition Classes: AnyRef

final def notify(): Unit

Definition Classes: AnyRef

final def notifyAll(): Unit

Definition Classes: AnyRef

def observeOn(context: ExecutionContext): Observable[T]

Use a specific execution context for future operations

context: the execution context
returns: an Observable that uses the specified execution context

def recover[U >: T](pf: PartialFunction[Throwable, U]): Observable[U]

Creates a new Observable that will handle any matching throwable that this Observable might contain.

Creates a new Observable that will handle any matching throwable that this Observable might contain. If there is no match, or if this Observable contains a valid result then the new Observable will contain the same.

Example:

mongoExceptionObservable recover { case e: MongoException => 0 } // final result: 0
mongoExceptionObservable recover { case e: NotFoundException => 0 } // result: exception

U: the type of the returned Observable
pf: the partial function used to pattern match against the onError throwable
returns: an Observable that will handle any matching throwable and not error.

def recoverWith[U >: T](pf: PartialFunction[Throwable, Observable[U]]): Observable[U]

Creates a new Observable that will handle any matching throwable that this Observable might contain by assigning it a value of another Observable.

If there is no match, or if this Observable contains a valid result then the new Observable will contain the same result.

Example:

successfulObservable recoverWith { case e: ArithmeticException => observableB } // result: successfulObservable
mongoExceptionObservable recoverWith { case t: Throwable => observableB } // result: observableB

Ensuring results from a Single Observer

recoverWith can potentially emit results from either Observer. This often isn't desirable, so to ensure only a single Observable issues results combine with the collect method eg:

val results = Observable(1 to 100)
  .collect()
  .recoverWith({ case t: Throwable => Observable(200 to 300).collect() })
  .subscribe((i: Seq[Int]) => print(results))

U: the type of the returned Observable
pf: the partial function used to pattern match against the onError throwable
returns: an Observable that will handle any matching throwable and not error but recover with a new observable

def subscribe(doOnNext: (T) ⇒ Any, doOnError: (Throwable) ⇒ Any, doOnComplete: () ⇒ Any): Unit

Subscribes to the Observable and requests Long.MaxValue.

Uses the default or overridden onNext, onError, onComplete partial functions.

doOnNext: anonymous function to apply to each emitted element.
doOnError: anonymous function to apply if there is an error.
doOnComplete: anonymous function to apply on completion.

def subscribe(doOnError: (Throwable) ⇒ Any, doOnComplete: () ⇒ Any): Unit

Subscribes to the Observable and requests Long.MaxValue.

doOnError: anonymous function to apply if there is an error.
doOnComplete: anonymous function to apply on completion.

def subscribe(doOnNext: (T) ⇒ Any, doOnError: (Throwable) ⇒ Any): Unit

Subscribes to the Observable and requests Long.MaxValue.

doOnNext: anonymous function to apply to each emitted element.
doOnError: anonymous function to apply if there is an error.

def subscribe(doOnNext: (T) ⇒ Any): Unit

Subscribes to the Observable and requests Long.MaxValue.

doOnNext: anonymous function to apply to each emitted element.

final def synchronized[T0](arg0: ⇒ T0): T0

Definition Classes: AnyRef

def toFuture(): Future[Seq[T]]

Collects the Observable results and converts to a scala.concurrent.Future.

Automatically subscribes to the Observable and uses the collect method to aggregate the results.

returns: a future representation of the whole Observable

Note: If the Observable is large then this will consume lots of memory! If the underlying Observable is infinite this Observable will never complete.

def toString(): String

Definition Classes: AnyRef → Any

def transform[S](mapFunction: (T) ⇒ S, errorMapFunction: (Throwable) ⇒ Throwable): Observable[S]

Creates a new Observable by applying the resultFunction function to each emitted result.

Creates a new Observable by applying the resultFunction function to each emitted result. If there is an error and onError is called the errorFunction function is applied to the failed result.

S: the resulting type of each item in the Observable
mapFunction: function that transforms a each result of the receiver and passes the result to the returned Observable
errorMapFunction: function that transforms a failure of the receiver into a failure of the returned observer
returns: an Observable with transformed results and / or error.

final def wait(): Unit

Definition Classes: AnyRef
Annotations: @throws( ... )

final def wait(arg0: Long, arg1: Int): Unit

Definition Classes: AnyRef
Annotations: @throws( ... )

final def wait(arg0: Long): Unit

Definition Classes: AnyRef
Annotations: @throws( ... )

final def withFilter(p: (T) ⇒ Boolean): Observable[T]

Used by for-comprehensions.

def zip[U](that: Observable[U]): Observable[(T, U)]

Zips the values of this and that Observable, and creates a new Observable holding the tuple of their results.

If this Observable fails, the resulting Observable is failed with the throwable stored in this. Otherwise, if that Observable fails, the resulting Observable is failed with the throwable stored in that.

It will only emit as many items as the number of items emitted by the source Observable that emits the fewest items.

U: the type of the that Observable
that: the Observable to zip with
returns: a new zipped Observable

Packages

Driver structure

ScalaObservable

implicit class ScalaObservable[T] extends AnyRef

Instance Constructors

Value Members

Ensuring results from a Single Observer

Ensuring results from a Single Observer

Inherited from AnyRef

Inherited from Any

Ungrouped

Packages

Driver structure

ScalaObservable 

implicit class ScalaObservable[T] extends AnyRef

Instance Constructors

Value Members

Ensuring results from a Single Observer

Ensuring results from a Single Observer

Inherited from AnyRef

Inherited from Any

Ungrouped

ScalaObservable