Options
All
  • Public
  • Public/Protected
  • All
Menu

Class MessageStream

A duplex stream that is capable of reading and writing raw wire protocol messages, with support for optional compression

Hierarchy

  • Duplex
    • MessageStream

Index

Constructors

constructor

Properties

[kBuffer]

[kBuffer]: BufferPool

allowHalfOpen

allowHalfOpen: boolean

If false then the stream will automatically end the writable side when the readable side ends. Set initially by the allowHalfOpen constructor option, which defaults to false.

This can be changed manually to change the half-open behavior of an existingDuplex stream instance, but must be changed before the 'end' event is emitted.

since

v0.9.4

destroyed

destroyed: boolean

Is true after readable.destroy() has been called.

since

v8.0.0

maxBsonMessageSize

maxBsonMessageSize: number

readable

readable: boolean

Is true if it is safe to call readable.read(), which means the stream has not been destroyed or emitted 'error' or 'end'.

since

v11.4.0

Readonly readableAborted

readableAborted: boolean

Returns whether the stream was destroyed or errored before emitting 'end'.

since

v16.8.0

experimental

Readonly readableDidRead

readableDidRead: boolean

Returns whether 'data' has been emitted.

since

v16.7.0

experimental

Readonly readableEncoding

readableEncoding: null | BufferEncoding

Getter for the property encoding of a given Readable stream. The encodingproperty can be set using the readable.setEncoding() method.

since

v12.7.0

Readonly readableEnded

readableEnded: boolean

Becomes true when 'end' event is emitted.

since

v12.9.0

Readonly readableFlowing

readableFlowing: null | boolean

This property reflects the current state of a Readable stream as described in the Three states section.

since

v9.4.0

Readonly readableHighWaterMark

readableHighWaterMark: number

Returns the value of highWaterMark passed when creating this Readable.

since

v9.3.0

Readonly readableLength

readableLength: number

This property contains the number of bytes (or objects) in the queue ready to be read. The value provides introspection data regarding the status of the highWaterMark.

since

v9.4.0

Readonly readableObjectMode

readableObjectMode: boolean

Getter for the property objectMode of a given Readable stream.

since

v12.3.0

Readonly writable

writable: boolean

Readonly writableCorked

writableCorked: number

Readonly writableEnded

writableEnded: boolean

Readonly writableFinished

writableFinished: boolean

Readonly writableHighWaterMark

writableHighWaterMark: number

Readonly writableLength

writableLength: number

Readonly writableObjectMode

writableObjectMode: boolean

Static Readonly captureRejectionSymbol

captureRejectionSymbol: typeof captureRejectionSymbol

Static captureRejections

captureRejections: boolean

Sets or gets the default captureRejection value for all emitters.

Static defaultMaxListeners

defaultMaxListeners: number

Static Readonly errorMonitor

errorMonitor: typeof errorMonitor

This symbol shall be used to install a listener for only monitoring 'error' events. Listeners installed using this symbol are called before the regular 'error' listeners are called.

Installing a listener using this symbol does not change the behavior once an 'error' event is emitted, therefore the process will still crash if no regular 'error' listener is installed.

Methods

[asyncIterator]

  • [asyncIterator](): AsyncIterableIterator<any>
  • Returns AsyncIterableIterator<any>

Optional _construct

  • _construct(callback: (error?: null | Error) => void): void
  • Parameters

    • callback: (error?: null | Error) => void
        • (error?: null | Error): void
        • Parameters

          • Optional error: null | Error

          Returns void

    Returns void

_destroy

  • _destroy(error: null | Error, callback: (error: null | Error) => void): void
  • Parameters

    • error: null | Error
    • callback: (error: null | Error) => void
        • (error: null | Error): void
        • Parameters

          • error: null | Error

          Returns void

    Returns void

_final

  • _final(callback: (error?: null | Error) => void): void
  • Parameters

    • callback: (error?: null | Error) => void
        • (error?: null | Error): void
        • Parameters

          • Optional error: null | Error

          Returns void

    Returns void

_read

  • _read(): void

_write

  • _write(chunk: Buffer, _: unknown, callback: Callback<Buffer>): void

Optional _writev

  • _writev(chunks: { chunk: any; encoding: BufferEncoding }[], callback: (error?: null | Error) => void): void
  • Parameters

    • chunks: { chunk: any; encoding: BufferEncoding }[]
    • callback: (error?: null | Error) => void
        • (error?: null | Error): void
        • Parameters

          • Optional error: null | Error

          Returns void

    Returns void

addListener

  • addListener(event: "close", listener: () => void): MessageStream
  • addListener(event: "data", listener: (chunk: any) => void): MessageStream
  • addListener(event: "end", listener: () => void): MessageStream
  • addListener(event: "error", listener: (err: Error) => void): MessageStream
  • addListener(event: "pause", listener: () => void): MessageStream
  • addListener(event: "readable", listener: () => void): MessageStream
  • addListener(event: "resume", listener: () => void): MessageStream
  • addListener(event: string | symbol, listener: (...args: any[]) => void): MessageStream
  • Event emitter The defined events on documents including:

    1. close
    2. data
    3. end
    4. error
    5. pause
    6. readable
    7. resume

    Parameters

    • event: "close"
    • listener: () => void
        • (): void
        • Returns void

    Returns MessageStream

  • Parameters

    • event: "data"
    • listener: (chunk: any) => void
        • (chunk: any): void
        • Parameters

          • chunk: any

          Returns void

    Returns MessageStream

  • Parameters

    • event: "end"
    • listener: () => void
        • (): void
        • Returns void

    Returns MessageStream

  • Parameters

    • event: "error"
    • listener: (err: Error) => void
        • (err: Error): void
        • Parameters

          • err: Error

          Returns void

    Returns MessageStream

  • Parameters

    • event: "pause"
    • listener: () => void
        • (): void
        • Returns void

    Returns MessageStream

  • Parameters

    • event: "readable"
    • listener: () => void
        • (): void
        • Returns void

    Returns MessageStream

  • Parameters

    • event: "resume"
    • listener: () => void
        • (): void
        • Returns void

    Returns MessageStream

  • Parameters

    • event: string | symbol
    • listener: (...args: any[]) => void
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns MessageStream

cork

  • cork(): void
  • Returns void

destroy

  • destroy(error?: Error): void
  • Destroy the stream. Optionally emit an 'error' event, and emit a 'close'event (unless emitClose is set to false). After this call, the readable stream will release any internal resources and subsequent calls to push()will be ignored.

    Once destroy() has been called any further calls will be a no-op and no further errors except from _destroy() may be emitted as 'error'.

    Implementors should not override this method, but instead implement readable._destroy().

    since

    v8.0.0

    Parameters

    • Optional error: Error

      Error which will be passed as payload in 'error' event

    Returns void

emit

  • emit(event: "close"): boolean
  • emit(event: "data", chunk: any): boolean
  • emit(event: "end"): boolean
  • emit(event: "error", err: Error): boolean
  • emit(event: "pause"): boolean
  • emit(event: "readable"): boolean
  • emit(event: "resume"): boolean
  • emit(event: string | symbol, ...args: any[]): boolean
  • Parameters

    • event: "close"

    Returns boolean

  • Parameters

    • event: "data"
    • chunk: any

    Returns boolean

  • Parameters

    • event: "end"

    Returns boolean

  • Parameters

    • event: "error"
    • err: Error

    Returns boolean

  • Parameters

    • event: "pause"

    Returns boolean

  • Parameters

    • event: "readable"

    Returns boolean

  • Parameters

    • event: "resume"

    Returns boolean

  • Parameters

    • event: string | symbol
    • Rest ...args: any[]

    Returns boolean

end

  • end(cb?: () => void): void
  • end(chunk: any, cb?: () => void): void
  • end(chunk: any, encoding?: BufferEncoding, cb?: () => void): void
  • Parameters

    • Optional cb: () => void
        • (): void
        • Returns void

    Returns void

  • Parameters

    • chunk: any
    • Optional cb: () => void
        • (): void
        • Returns void

    Returns void

  • Parameters

    • chunk: any
    • Optional encoding: BufferEncoding
    • Optional cb: () => void
        • (): void
        • Returns void

    Returns void

eventNames

  • eventNames(): (string | symbol)[]
  • Returns an array listing the events for which the emitter has registered listeners. The values in the array are strings or Symbols.

    const EventEmitter = require('events');
    const myEE = new EventEmitter();
    myEE.on('foo', () => {});
    myEE.on('bar', () => {});

    const sym = Symbol('symbol');
    myEE.on(sym, () => {});

    console.log(myEE.eventNames());
    // Prints: [ 'foo', 'bar', Symbol(symbol) ]
    since

    v6.0.0

    Returns (string | symbol)[]

getMaxListeners

  • getMaxListeners(): number
  • Returns the current max listener value for the EventEmitter which is either set by emitter.setMaxListeners(n) or defaults to defaultMaxListeners.

    since

    v1.0.0

    Returns number

isPaused

  • isPaused(): boolean
  • The readable.isPaused() method returns the current operating state of theReadable. This is used primarily by the mechanism that underlies thereadable.pipe() method. In most typical cases, there will be no reason to use this method directly.

    const readable = new stream.Readable();

    readable.isPaused(); // === false
    readable.pause();
    readable.isPaused(); // === true
    readable.resume();
    readable.isPaused(); // === false
    since

    v0.11.14

    Returns boolean

listenerCount

  • listenerCount(eventName: string | symbol): number
  • Returns the number of listeners listening to the event named eventName.

    since

    v3.2.0

    Parameters

    • eventName: string | symbol

      The name of the event being listened for

    Returns number

listeners

  • listeners(eventName: string | symbol): Function[]
  • Returns a copy of the array of listeners for the event named eventName.

    server.on('connection', (stream) => {
    console.log('someone connected!');
    });
    console.log(util.inspect(server.listeners('connection')));
    // Prints: [ [Function] ]
    since

    v0.1.26

    Parameters

    • eventName: string | symbol

    Returns Function[]

off

  • off(eventName: string | symbol, listener: (...args: any[]) => void): MessageStream
  • Alias for emitter.removeListener().

    since

    v10.0.0

    Parameters

    • eventName: string | symbol
    • listener: (...args: any[]) => void
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns MessageStream

on

  • Parameters

    • event: "close"
    • listener: () => void
        • (): void
        • Returns void

    Returns MessageStream

  • Parameters

    • event: "data"
    • listener: (chunk: any) => void
        • (chunk: any): void
        • Parameters

          • chunk: any

          Returns void

    Returns MessageStream

  • Parameters

    • event: "end"
    • listener: () => void
        • (): void
        • Returns void

    Returns MessageStream

  • Parameters

    • event: "error"
    • listener: (err: Error) => void
        • (err: Error): void
        • Parameters

          • err: Error

          Returns void

    Returns MessageStream

  • Parameters

    • event: "pause"
    • listener: () => void
        • (): void
        • Returns void

    Returns MessageStream

  • Parameters

    • event: "readable"
    • listener: () => void
        • (): void
        • Returns void

    Returns MessageStream

  • Parameters

    • event: "resume"
    • listener: () => void
        • (): void
        • Returns void

    Returns MessageStream

  • Parameters

    • event: string | symbol
    • listener: (...args: any[]) => void
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns MessageStream

once

  • Parameters

    • event: "close"
    • listener: () => void
        • (): void
        • Returns void

    Returns MessageStream

  • Parameters

    • event: "data"
    • listener: (chunk: any) => void
        • (chunk: any): void
        • Parameters

          • chunk: any

          Returns void

    Returns MessageStream

  • Parameters

    • event: "end"
    • listener: () => void
        • (): void
        • Returns void

    Returns MessageStream

  • Parameters

    • event: "error"
    • listener: (err: Error) => void
        • (err: Error): void
        • Parameters

          • err: Error

          Returns void

    Returns MessageStream

  • Parameters

    • event: "pause"
    • listener: () => void
        • (): void
        • Returns void

    Returns MessageStream

  • Parameters

    • event: "readable"
    • listener: () => void
        • (): void
        • Returns void

    Returns MessageStream

  • Parameters

    • event: "resume"
    • listener: () => void
        • (): void
        • Returns void

    Returns MessageStream

  • Parameters

    • event: string | symbol
    • listener: (...args: any[]) => void
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns MessageStream

pause

  • The readable.pause() method will cause a stream in flowing mode to stop emitting 'data' events, switching out of flowing mode. Any data that becomes available will remain in the internal buffer.

    const readable = getReadableStreamSomehow();
    readable.on('data', (chunk) => {
    console.log(`Received ${chunk.length} bytes of data.`);
    readable.pause();
    console.log('There will be no additional data for 1 second.');
    setTimeout(() => {
    console.log('Now data will start flowing again.');
    readable.resume();
    }, 1000);
    });

    The readable.pause() method has no effect if there is a 'readable'event listener.

    since

    v0.9.4

    Returns MessageStream

pipe

  • pipe<T>(destination: T, options?: { end?: boolean }): T
  • Type parameters

    • T: WritableStream<T>

    Parameters

    • destination: T
    • Optional options: { end?: boolean }
      • Optional end?: boolean

    Returns T

prependListener

  • prependListener(event: "close", listener: () => void): MessageStream
  • prependListener(event: "data", listener: (chunk: any) => void): MessageStream
  • prependListener(event: "end", listener: () => void): MessageStream
  • prependListener(event: "error", listener: (err: Error) => void): MessageStream
  • prependListener(event: "pause", listener: () => void): MessageStream
  • prependListener(event: "readable", listener: () => void): MessageStream
  • prependListener(event: "resume", listener: () => void): MessageStream
  • prependListener(event: string | symbol, listener: (...args: any[]) => void): MessageStream
  • Parameters

    • event: "close"
    • listener: () => void
        • (): void
        • Returns void

    Returns MessageStream

  • Parameters

    • event: "data"
    • listener: (chunk: any) => void
        • (chunk: any): void
        • Parameters

          • chunk: any

          Returns void

    Returns MessageStream

  • Parameters

    • event: "end"
    • listener: () => void
        • (): void
        • Returns void

    Returns MessageStream

  • Parameters

    • event: "error"
    • listener: (err: Error) => void
        • (err: Error): void
        • Parameters

          • err: Error

          Returns void

    Returns MessageStream

  • Parameters

    • event: "pause"
    • listener: () => void
        • (): void
        • Returns void

    Returns MessageStream

  • Parameters

    • event: "readable"
    • listener: () => void
        • (): void
        • Returns void

    Returns MessageStream

  • Parameters

    • event: "resume"
    • listener: () => void
        • (): void
        • Returns void

    Returns MessageStream

  • Parameters

    • event: string | symbol
    • listener: (...args: any[]) => void
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns MessageStream

prependOnceListener

  • prependOnceListener(event: "close", listener: () => void): MessageStream
  • prependOnceListener(event: "data", listener: (chunk: any) => void): MessageStream
  • prependOnceListener(event: "end", listener: () => void): MessageStream
  • prependOnceListener(event: "error", listener: (err: Error) => void): MessageStream
  • prependOnceListener(event: "pause", listener: () => void): MessageStream
  • prependOnceListener(event: "readable", listener: () => void): MessageStream
  • prependOnceListener(event: "resume", listener: () => void): MessageStream
  • prependOnceListener(event: string | symbol, listener: (...args: any[]) => void): MessageStream
  • Parameters

    • event: "close"
    • listener: () => void
        • (): void
        • Returns void

    Returns MessageStream

  • Parameters

    • event: "data"
    • listener: (chunk: any) => void
        • (chunk: any): void
        • Parameters

          • chunk: any

          Returns void

    Returns MessageStream

  • Parameters

    • event: "end"
    • listener: () => void
        • (): void
        • Returns void

    Returns MessageStream

  • Parameters

    • event: "error"
    • listener: (err: Error) => void
        • (err: Error): void
        • Parameters

          • err: Error

          Returns void

    Returns MessageStream

  • Parameters

    • event: "pause"
    • listener: () => void
        • (): void
        • Returns void

    Returns MessageStream

  • Parameters

    • event: "readable"
    • listener: () => void
        • (): void
        • Returns void

    Returns MessageStream

  • Parameters

    • event: "resume"
    • listener: () => void
        • (): void
        • Returns void

    Returns MessageStream

  • Parameters

    • event: string | symbol
    • listener: (...args: any[]) => void
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns MessageStream

push

  • push(chunk: any, encoding?: BufferEncoding): boolean
  • Parameters

    • chunk: any
    • Optional encoding: BufferEncoding

    Returns boolean

rawListeners

  • rawListeners(eventName: string | symbol): Function[]
  • Returns a copy of the array of listeners for the event named eventName, including any wrappers (such as those created by .once()).

    const emitter = new EventEmitter();
    emitter.once('log', () => console.log('log once'));

    // Returns a new Array with a function `onceWrapper` which has a property
    // `listener` which contains the original listener bound above
    const listeners = emitter.rawListeners('log');
    const logFnWrapper = listeners[0];

    // Logs "log once" to the console and does not unbind the `once` event
    logFnWrapper.listener();

    // Logs "log once" to the console and removes the listener
    logFnWrapper();

    emitter.on('log', () => console.log('log persistently'));
    // Will return a new Array with a single function bound by `.on()` above
    const newListeners = emitter.rawListeners('log');

    // Logs "log persistently" twice
    newListeners[0]();
    emitter.emit('log');
    since

    v9.4.0

    Parameters

    • eventName: string | symbol

    Returns Function[]

read

  • read(size?: number): any
  • The readable.read() method pulls some data out of the internal buffer and returns it. If no data available to be read, null is returned. By default, the data will be returned as a Buffer object unless an encoding has been specified using the readable.setEncoding() method or the stream is operating in object mode.

    The optional size argument specifies a specific number of bytes to read. Ifsize bytes are not available to be read, null will be returned _unless_the stream has ended, in which case all of the data remaining in the internal buffer will be returned.

    If the size argument is not specified, all of the data contained in the internal buffer will be returned.

    The size argument must be less than or equal to 1 GiB.

    The readable.read() method should only be called on Readable streams operating in paused mode. In flowing mode, readable.read() is called automatically until the internal buffer is fully drained.

    const readable = getReadableStreamSomehow();

    // 'readable' may be triggered multiple times as data is buffered in
    readable.on('readable', () => {
    let chunk;
    console.log('Stream is readable (new data received in buffer)');
    // Use a loop to make sure we read all currently available data
    while (null !== (chunk = readable.read())) {
    console.log(`Read ${chunk.length} bytes of data...`);
    }
    });

    // 'end' will be triggered once when there is no more data available
    readable.on('end', () => {
    console.log('Reached end of stream.');
    });

    Each call to readable.read() returns a chunk of data, or null. The chunks are not concatenated. A while loop is necessary to consume all data currently in the buffer. When reading a large file .read() may return null, having consumed all buffered content so far, but there is still more data to come not yet buffered. In this case a new 'readable' event will be emitted when there is more data in the buffer. Finally the 'end' event will be emitted when there is no more data to come.

    Therefore to read a file's whole contents from a readable, it is necessary to collect chunks across multiple 'readable' events:

    const chunks = [];

    readable.on('readable', () => {
    let chunk;
    while (null !== (chunk = readable.read())) {
    chunks.push(chunk);
    }
    });

    readable.on('end', () => {
    const content = chunks.join('');
    });

    A Readable stream in object mode will always return a single item from a call to readable.read(size), regardless of the value of thesize argument.

    If the readable.read() method returns a chunk of data, a 'data' event will also be emitted.

    Calling read after the 'end' event has been emitted will return null. No runtime error will be raised.

    since

    v0.9.4

    Parameters

    • Optional size: number

      Optional argument to specify how much data to read.

    Returns any

removeAllListeners

  • Removes all listeners, or those of the specified eventName.

    It is bad practice to remove listeners added elsewhere in the code, particularly when the EventEmitter instance was created by some other component or module (e.g. sockets or file streams).

    Returns a reference to the EventEmitter, so that calls can be chained.

    since

    v0.1.26

    Parameters

    • Optional event: string | symbol

    Returns MessageStream

removeListener

  • removeListener(event: "close", listener: () => void): MessageStream
  • removeListener(event: "data", listener: (chunk: any) => void): MessageStream
  • removeListener(event: "end", listener: () => void): MessageStream
  • removeListener(event: "error", listener: (err: Error) => void): MessageStream
  • removeListener(event: "pause", listener: () => void): MessageStream
  • removeListener(event: "readable", listener: () => void): MessageStream
  • removeListener(event: "resume", listener: () => void): MessageStream
  • removeListener(event: string | symbol, listener: (...args: any[]) => void): MessageStream
  • Parameters

    • event: "close"
    • listener: () => void
        • (): void
        • Returns void

    Returns MessageStream

  • Parameters

    • event: "data"
    • listener: (chunk: any) => void
        • (chunk: any): void
        • Parameters

          • chunk: any

          Returns void

    Returns MessageStream

  • Parameters

    • event: "end"
    • listener: () => void
        • (): void
        • Returns void

    Returns MessageStream

  • Parameters

    • event: "error"
    • listener: (err: Error) => void
        • (err: Error): void
        • Parameters

          • err: Error

          Returns void

    Returns MessageStream

  • Parameters

    • event: "pause"
    • listener: () => void
        • (): void
        • Returns void

    Returns MessageStream

  • Parameters

    • event: "readable"
    • listener: () => void
        • (): void
        • Returns void

    Returns MessageStream

  • Parameters

    • event: "resume"
    • listener: () => void
        • (): void
        • Returns void

    Returns MessageStream

  • Parameters

    • event: string | symbol
    • listener: (...args: any[]) => void
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns MessageStream

resume

  • The readable.resume() method causes an explicitly paused Readable stream to resume emitting 'data' events, switching the stream into flowing mode.

    The readable.resume() method can be used to fully consume the data from a stream without actually processing any of that data:

    getReadableStreamSomehow()
    .resume()
    .on('end', () => {
    console.log('Reached the end, but did not read anything.');
    });

    The readable.resume() method has no effect if there is a 'readable'event listener.

    since

    v0.9.4

    Returns MessageStream

setDefaultEncoding

  • Parameters

    • encoding: BufferEncoding

    Returns MessageStream

setEncoding

  • The readable.setEncoding() method sets the character encoding for data read from the Readable stream.

    By default, no encoding is assigned and stream data will be returned asBuffer objects. Setting an encoding causes the stream data to be returned as strings of the specified encoding rather than as Bufferobjects. For instance, calling readable.setEncoding('utf8') will cause the output data to be interpreted as UTF-8 data, and passed as strings. Callingreadable.setEncoding('hex') will cause the data to be encoded in hexadecimal string format.

    The Readable stream will properly handle multi-byte characters delivered through the stream that would otherwise become improperly decoded if simply pulled from the stream as Buffer objects.

    const readable = getReadableStreamSomehow();
    readable.setEncoding('utf8');
    readable.on('data', (chunk) => {
    assert.equal(typeof chunk, 'string');
    console.log('Got %d characters of string data:', chunk.length);
    });
    since

    v0.9.4

    Parameters

    • encoding: BufferEncoding

      The encoding to use.

    Returns MessageStream

setMaxListeners

  • By default EventEmitters will print a warning if more than 10 listeners are added for a particular event. This is a useful default that helps finding memory leaks. The emitter.setMaxListeners() method allows the limit to be modified for this specific EventEmitter instance. The value can be set toInfinity (or 0) to indicate an unlimited number of listeners.

    Returns a reference to the EventEmitter, so that calls can be chained.

    since

    v0.3.5

    Parameters

    • n: number

    Returns MessageStream

uncork

  • uncork(): void
  • Returns void

unpipe

  • The readable.unpipe() method detaches a Writable stream previously attached using the pipe method.

    If the destination is not specified, then all pipes are detached.

    If the destination is specified, but no pipe is set up for it, then the method does nothing.

    const fs = require('fs');
    const readable = getReadableStreamSomehow();
    const writable = fs.createWriteStream('file.txt');
    // All the data from readable goes into 'file.txt',
    // but only for the first second.
    readable.pipe(writable);
    setTimeout(() => {
    console.log('Stop writing to file.txt.');
    readable.unpipe(writable);
    console.log('Manually close the file stream.');
    writable.end();
    }, 1000);
    since

    v0.9.4

    Parameters

    • Optional destination: WritableStream

      Optional specific stream to unpipe

    Returns MessageStream

unshift

  • unshift(chunk: any, encoding?: BufferEncoding): void
  • Passing chunk as null signals the end of the stream (EOF) and behaves the same as readable.push(null), after which no more data can be written. The EOF signal is put at the end of the buffer and any buffered data will still be flushed.

    The readable.unshift() method pushes a chunk of data back into the internal buffer. This is useful in certain situations where a stream is being consumed by code that needs to "un-consume" some amount of data that it has optimistically pulled out of the source, so that the data can be passed on to some other party.

    The stream.unshift(chunk) method cannot be called after the 'end' event has been emitted or a runtime error will be thrown.

    Developers using stream.unshift() often should consider switching to use of a Transform stream instead. See the API for stream implementers section for more information.

    // Pull off a header delimited by \n\n.
    // Use unshift() if we get too much.
    // Call the callback with (error, header, stream).
    const { StringDecoder } = require('string_decoder');
    function parseHeader(stream, callback) {
    stream.on('error', callback);
    stream.on('readable', onReadable);
    const decoder = new StringDecoder('utf8');
    let header = '';
    function onReadable() {
    let chunk;
    while (null !== (chunk = stream.read())) {
    const str = decoder.write(chunk);
    if (str.match(/\n\n/)) {
    // Found the header boundary.
    const split = str.split(/\n\n/);
    header += split.shift();
    const remaining = split.join('\n\n');
    const buf = Buffer.from(remaining, 'utf8');
    stream.removeListener('error', callback);
    // Remove the 'readable' listener before unshifting.
    stream.removeListener('readable', onReadable);
    if (buf.length)
    stream.unshift(buf);
    // Now the body of the message can be read from the stream.
    callback(null, header, stream);
    } else {
    // Still reading the header.
    header += str;
    }
    }
    }
    }

    Unlike push, stream.unshift(chunk) will not end the reading process by resetting the internal reading state of the stream. This can cause unexpected results if readable.unshift() is called during a read (i.e. from within a _read implementation on a custom stream). Following the call to readable.unshift() with an immediate push will reset the reading state appropriately, however it is best to simply avoid calling readable.unshift() while in the process of performing a read.

    since

    v0.9.11

    Parameters

    • chunk: any

      Chunk of data to unshift onto the read queue. For streams not operating in object mode, chunk must be a string, Buffer, Uint8Array or null. For object mode streams, chunk may be any JavaScript value.

    • Optional encoding: BufferEncoding

      Encoding of string chunks. Must be a valid Buffer encoding, such as 'utf8' or 'ascii'.

    Returns void

wrap

  • Prior to Node.js 0.10, streams did not implement the entire stream module API as it is currently defined. (See Compatibility for more information.)

    When using an older Node.js library that emits 'data' events and has a pause method that is advisory only, thereadable.wrap() method can be used to create a Readable stream that uses the old stream as its data source.

    It will rarely be necessary to use readable.wrap() but the method has been provided as a convenience for interacting with older Node.js applications and libraries.

    const { OldReader } = require('./old-api-module.js');
    const { Readable } = require('stream');
    const oreader = new OldReader();
    const myReader = new Readable().wrap(oreader);

    myReader.on('readable', () => {
    myReader.read(); // etc.
    });
    since

    v0.9.4

    Parameters

    • stream: ReadableStream

      An "old style" readable stream

    Returns MessageStream

write

  • write(chunk: any, encoding?: BufferEncoding, cb?: (error: undefined | null | Error) => void): boolean
  • write(chunk: any, cb?: (error: undefined | null | Error) => void): boolean
  • Parameters

    • chunk: any
    • Optional encoding: BufferEncoding
    • Optional cb: (error: undefined | null | Error) => void
        • (error: undefined | null | Error): void
        • Parameters

          • error: undefined | null | Error

          Returns void

    Returns boolean

  • Parameters

    • chunk: any
    • Optional cb: (error: undefined | null | Error) => void
        • (error: undefined | null | Error): void
        • Parameters

          • error: undefined | null | Error

          Returns void

    Returns boolean

writeCommand

Static from

  • from(src: string | Object | Promise<any> | Stream | Blob | ArrayBuffer | Iterable<any> | AsyncIterable<any> | AsyncGeneratorFunction): Duplex
  • A utility method for creating duplex streams.

    • Stream converts writable stream into writable Duplex and readable stream to Duplex.
    • Blob converts into readable Duplex.
    • string converts into readable Duplex.
    • ArrayBuffer converts into readable Duplex.
    • AsyncIterable converts into a readable Duplex. Cannot yield null.
    • AsyncGeneratorFunction converts into a readable/writable transform Duplex. Must take a source AsyncIterable as first parameter. Cannot yield null.
    • AsyncFunction converts into a writable Duplex. Must return either null or undefined
    • Object ({ writable, readable }) converts readable and writable into Stream and then combines them into Duplex where the Duplex will write to the writable and read from the readable.
    • Promise converts into readable Duplex. Value null is ignored.
    since

    v16.8.0

    Parameters

    • src: string | Object | Promise<any> | Stream | Blob | ArrayBuffer | Iterable<any> | AsyncIterable<any> | AsyncGeneratorFunction

    Returns Duplex

Static getEventListeners

  • getEventListeners(emitter: DOMEventTarget | EventEmitter, name: string | symbol): Function[]
  • Returns a copy of the array of listeners for the event named eventName.

    For EventEmitters this behaves exactly the same as calling .listeners on the emitter.

    For EventTargets this is the only way to get the event listeners for the event target. This is useful for debugging and diagnostic purposes.

    const { getEventListeners, EventEmitter } = require('events');

    {
    const ee = new EventEmitter();
    const listener = () => console.log('Events are fun');
    ee.on('foo', listener);
    getEventListeners(ee, 'foo'); // [listener]
    }
    {
    const et = new EventTarget();
    const listener = () => console.log('Events are fun');
    et.addEventListener('foo', listener);
    getEventListeners(et, 'foo'); // [listener]
    }
    since

    v15.2.0

    Parameters

    • emitter: DOMEventTarget | EventEmitter
    • name: string | symbol

    Returns Function[]

Static isDisturbed

  • isDisturbed(stream: Readable | ReadableStream): boolean
  • Returns whether the stream has been read from or cancelled.

    since

    v16.8.0

    Parameters

    • stream: Readable | ReadableStream

    Returns boolean

Static listenerCount

  • listenerCount(emitter: EventEmitter, eventName: string | symbol): number
  • A class method that returns the number of listeners for the given eventNameregistered on the given emitter.

    const { EventEmitter, listenerCount } = require('events');
    const myEmitter = new EventEmitter();
    myEmitter.on('event', () => {});
    myEmitter.on('event', () => {});
    console.log(listenerCount(myEmitter, 'event'));
    // Prints: 2
    since

    v0.9.12

    deprecated

    Since v3.2.0 - Use listenerCount instead.

    Parameters

    • emitter: EventEmitter

      The emitter to query

    • eventName: string | symbol

      The event name

    Returns number

Static on

  • on(emitter: EventEmitter, eventName: string, options?: StaticEventEmitterOptions): AsyncIterableIterator<any>
  • ```js const { on, EventEmitter } = require('events');

    (async () => { const ee = new EventEmitter();

    // Emit later on process.nextTick(() => { ee.emit('foo', 'bar'); ee.emit('foo', 42); });

    for await (const event of on(ee, 'foo')) { // The execution of this inner block is synchronous and it // processes one event at a time (even with await). Do not use // if concurrent execution is required. console.log(event); // prints ['bar'] [42] } // Unreachable here })();


    Returns an `AsyncIterator` that iterates `eventName` events. It will throw
    if the `EventEmitter` emits `'error'`. It removes all listeners when
    exiting the loop. The `value` returned by each iteration is an array
    composed of the emitted event arguments.

    An `AbortSignal` can be used to cancel waiting on events:

    ```js
    const { on, EventEmitter } = require('events');
    const ac = new AbortController();

    (async () => {
    const ee = new EventEmitter();

    // Emit later on
    process.nextTick(() => {
    ee.emit('foo', 'bar');
    ee.emit('foo', 42);
    });

    for await (const event of on(ee, 'foo', { signal: ac.signal })) {
    // The execution of this inner block is synchronous and it
    // processes one event at a time (even with await). Do not use
    // if concurrent execution is required.
    console.log(event); // prints ['bar'] [42]
    }
    // Unreachable here
    })();

    process.nextTick(() => ac.abort());
    since

    v13.6.0, v12.16.0

    Parameters

    • emitter: EventEmitter
    • eventName: string

      The name of the event being listened for

    • Optional options: StaticEventEmitterOptions

    Returns AsyncIterableIterator<any>

    that iterates eventName events emitted by the emitter

Static once

  • once(emitter: NodeEventTarget, eventName: string | symbol, options?: StaticEventEmitterOptions): Promise<any[]>
  • once(emitter: DOMEventTarget, eventName: string, options?: StaticEventEmitterOptions): Promise<any[]>
  • Creates a Promise that is fulfilled when the EventEmitter emits the given event or that is rejected if the EventEmitter emits 'error' while waiting. The Promise will resolve with an array of all the arguments emitted to the given event.

    This method is intentionally generic and works with the web platform EventTarget interface, which has no special'error' event semantics and does not listen to the 'error' event.

    const { once, EventEmitter } = require('events');

    async function run() {
    const ee = new EventEmitter();

    process.nextTick(() => {
    ee.emit('myevent', 42);
    });

    const [value] = await once(ee, 'myevent');
    console.log(value);

    const err = new Error('kaboom');
    process.nextTick(() => {
    ee.emit('error', err);
    });

    try {
    await once(ee, 'myevent');
    } catch (err) {
    console.log('error happened', err);
    }
    }

    run();

    The special handling of the 'error' event is only used when events.once()is used to wait for another event. If events.once() is used to wait for the 'error' event itself, then it is treated as any other kind of event without special handling:

    const { EventEmitter, once } = require('events');

    const ee = new EventEmitter();

    once(ee, 'error')
    .then(([err]) => console.log('ok', err.message))
    .catch((err) => console.log('error', err.message));

    ee.emit('error', new Error('boom'));

    // Prints: ok boom

    An AbortSignal can be used to cancel waiting for the event:

    const { EventEmitter, once } = require('events');

    const ee = new EventEmitter();
    const ac = new AbortController();

    async function foo(emitter, event, signal) {
    try {
    await once(emitter, event, { signal });
    console.log('event emitted!');
    } catch (error) {
    if (error.name === 'AbortError') {
    console.error('Waiting for the event was canceled!');
    } else {
    console.error('There was an error', error.message);
    }
    }
    }

    foo(ee, 'foo', ac.signal);
    ac.abort(); // Abort waiting for the event
    ee.emit('foo'); // Prints: Waiting for the event was canceled!
    since

    v11.13.0, v10.16.0

    Parameters

    • emitter: NodeEventTarget
    • eventName: string | symbol
    • Optional options: StaticEventEmitterOptions

    Returns Promise<any[]>

  • Parameters

    • emitter: DOMEventTarget
    • eventName: string
    • Optional options: StaticEventEmitterOptions

    Returns Promise<any[]>

Generated using TypeDoc