Readonly pipelineStatic Readonly CLOSEStatic Readonly captureValue: Symbol.for('nodejs.rejection')
See how to write a custom rejection handler.
v13.4.0, v12.16.0
Static captureValue: boolean
Change the default captureRejections option on all new EventEmitter objects.
v13.4.0, v12.16.0
Static defaultBy default, a maximum of 10 listeners can be registered for any single
event. This limit can be changed for individual EventEmitter instances
using the emitter.setMaxListeners(n) method. To change the default
for allEventEmitter instances, the events.defaultMaxListenersproperty can be used. If this value is not a positive number, a RangeErroris thrown.
Take caution when setting the events.defaultMaxListeners because the
change affects allEventEmitter instances, including those created before
the change is made. However, calling emitter.setMaxListeners(n) still has
precedence over events.defaultMaxListeners.
This is not a hard limit. The EventEmitter instance will allow
more listeners to be added but will output a trace warning to stderr indicating
that a "possible EventEmitter memory leak" has been detected. For any singleEventEmitter, the emitter.getMaxListeners() and emitter.setMaxListeners()methods can be used to
temporarily avoid this warning:
import { EventEmitter } from 'node:events';
const emitter = new EventEmitter();
emitter.setMaxListeners(emitter.getMaxListeners() + 1);
emitter.once('event', () => {
// do stuff
emitter.setMaxListeners(Math.max(emitter.getMaxListeners() - 1, 0));
});
The --trace-warnings command-line flag can be used to display the
stack trace for such warnings.
The emitted warning can be inspected with process.on('warning') and will
have the additional emitter, type, and count properties, referring to
the event emitter instance, the event's name and the number of attached
listeners, respectively.
Its name property is set to 'MaxListenersExceededWarning'.
v0.11.2
Static Readonly errorThis symbol shall be used to install a listener for only monitoring 'error'events. Listeners installed using this symbol are called before the regular'error' listeners are called.
Installing a listener using this symbol does not change the behavior once an'error' event is emitted. Therefore, the process will still crash if no
regular 'error' listener is installed.
v13.6.0, v12.17.0
The cursor is closed and all remaining locally buffered documents have been iterated.
A killCursors command was attempted on this cursor.
This is performed if the cursor id is non zero.
Optional [captureAdd a cursor flag to the cursor
The flag to set, must be one of following ['tailable', 'oplogReplay', 'noCursorTimeout', 'awaitData', 'partial' -.
The flag boolean value.
Add a stage to the aggregation pipeline
const documents = await users.aggregate().addStage({ $match: { name: /Mike/ } }).toArray();
const documents = await users.aggregate()
.addStage<{ name: string }>({ $project: { name: true } })
.toArray(); // type of documents is { name: string }[]
Set the batch size for the cursor.
The number of documents to return per batch. See command documentation.
Returns a new uninitialized copy of this cursor, with options matching those that have been set on the current instance
Rest ...args: Parameters<AbstractCursorEvents[EventKey]>Execute the explain for the cursor
Optional verbosity: ExplainVerbosityLikeIterates over all the documents for this cursor using the iterator, callback pattern.
If the iterator returns false, iteration will stop.
The iteration callback.
Add a geoNear stage to the aggregation pipeline
Add a group stage to the aggregation pipeline
Add a limit stage to the aggregation pipeline
Add a lookup stage to the aggregation pipeline
Map all documents using the provided function If there is a transform set on the cursor, that will be called first and the result passed to this function's transform.
The mapping transformation method.
Note Cursors use null internally to indicate that there are no more documents in the cursor. Providing a mapping
function that maps values to null will result in the cursor closing itself before it has finished iterating
all documents. This will not result in a memory leak, just surprising behavior. For example:
const cursor = collection.find({});
cursor.map(() => null);
const documents = await cursor.toArray();
// documents is always [], regardless of how many documents are in the collection.
Other falsey values are allowed:
const cursor = collection.find({});
cursor.map(() => '');
const documents = await cursor.toArray();
// documents is now an array of empty strings
Note for Typescript Users: adding a transform changes the return type of the iteration of this cursor, it does not return a new instance of a cursor. This means when calling map, you should always assign the result to a new variable in order to get a correctly typed cursor variable. Take note of the following example:
const cursor: FindCursor<Document> = coll.find();
const mappedCursor: FindCursor<number> = cursor.map(doc => Object.keys(doc).length);
const keyCounts: number[] = await mappedCursor.toArray(); // cursor.toArray() still returns Document[]
Add a match stage to the aggregation pipeline
Set a maxTimeMS on the cursor query, allowing for hard timeout limits on queries (Only supported on MongoDB 2.6 or higher)
Number of milliseconds to wait before aborting the query.
Add an out stage to the aggregation pipeline
Add a project stage to the aggregation pipeline
In order to strictly type this function you must provide an interface that represents the effect of your projection on the result documents.
By default chaining a projection to your cursor changes the returned type to the generic Document type. You should specify a parameterized type to have assertions on your final results.
// Best way
const docs: AggregationCursor<{ a: number }> = cursor.project<{ a: number }>({ _id: 0, a: true });
// Flexible way
const docs: AggregationCursor<Document> = cursor.project({ _id: 0, a: true });
const cursor: AggregationCursor<{ a: number; b: string }> = coll.aggregate([]);
const projectCursor = cursor.project<{ a: number }>({ _id: 0, a: true });
const aPropOnlyArray: {a: number}[] = await projectCursor.toArray();
// or always use chaining and save the final cursor
const cursor = coll.aggregate().project<{ a: string }>({
_id: 0,
a: { $convert: { input: '$a', to: 'string' }
}});
Add a redact stage to the aggregation pipeline
Optional event: string | symbol | EventKeyAdd a skip stage to the aggregation pipeline
Add a sort stage to the aggregation pipeline
Optional options: CursorStreamOptionsReturns an array of documents. The caller is responsible for making sure that there is enough memory to store the results. Note that the array only contains partial results when this cursor had been previously accessed. In that case, cursor.rewind() can be used to reset the cursor.
Add a unwind stage to the aggregation pipeline
Set the ReadPreference for the cursor.
Set the ReadPreference for the cursor.
The new read preference for the cursor.
Static addExperimental
Listens once to the abort event on the provided signal.
Listening to the abort event on abort signals is unsafe and may
lead to resource leaks since another third party with the signal can
call e.stopImmediatePropagation(). Unfortunately Node.js cannot change
this since it would violate the web standard. Additionally, the original
API makes it easy to forget to remove listeners.
This API allows safely using AbortSignals in Node.js APIs by solving these
two issues by listening to the event such that stopImmediatePropagation does
not prevent the listener from running.
Returns a disposable so that it may be unsubscribed from more easily.
import { addAbortListener } from 'node:events';
function example(signal) {
let disposable;
try {
signal.addEventListener('abort', (e) => e.stopImmediatePropagation());
disposable = addAbortListener(signal, (e) => {
// Do something when signal is aborted.
});
} finally {
disposable?.[Symbol.dispose]();
}
}
Disposable that removes the abort listener.
v20.5.0
Static getReturns a copy of the array of listeners for the event named eventName.
For EventEmitters this behaves exactly the same as calling .listeners on
the emitter.
For EventTargets this is the only way to get the event listeners for the
event target. This is useful for debugging and diagnostic purposes.
import { getEventListeners, EventEmitter } from 'node:events';
{
const ee = new EventEmitter();
const listener = () => console.log('Events are fun');
ee.on('foo', listener);
console.log(getEventListeners(ee, 'foo')); // [ [Function: listener] ]
}
{
const et = new EventTarget();
const listener = () => console.log('Events are fun');
et.addEventListener('foo', listener);
console.log(getEventListeners(et, 'foo')); // [ [Function: listener] ]
}
v15.2.0, v14.17.0
Static getReturns the currently set max amount of listeners.
For EventEmitters this behaves exactly the same as calling .getMaxListeners on
the emitter.
For EventTargets this is the only way to get the max event listeners for the
event target. If the number of event handlers on a single EventTarget exceeds
the max set, the EventTarget will print a warning.
import { getMaxListeners, setMaxListeners, EventEmitter } from 'node:events';
{
const ee = new EventEmitter();
console.log(getMaxListeners(ee)); // 10
setMaxListeners(11, ee);
console.log(getMaxListeners(ee)); // 11
}
{
const et = new EventTarget();
console.log(getMaxListeners(et)); // 10
setMaxListeners(11, et);
console.log(getMaxListeners(et)); // 11
}
v19.9.0
Static listenerA class method that returns the number of listeners for the given eventNameregistered on the given emitter.
import { EventEmitter, listenerCount } from 'node:events';
const myEmitter = new EventEmitter();
myEmitter.on('event', () => {});
myEmitter.on('event', () => {});
console.log(listenerCount(myEmitter, 'event'));
// Prints: 2
The emitter to query
The event name
v0.9.12
Since v3.2.0 - Use listenerCount instead.
Static onimport { on, EventEmitter } from 'node:events';
import process from 'node:process';
const ee = new EventEmitter();
// Emit later on
process.nextTick(() => {
ee.emit('foo', 'bar');
ee.emit('foo', 42);
});
for await (const event of on(ee, 'foo')) {
// The execution of this inner block is synchronous and it
// processes one event at a time (even with await). Do not use
// if concurrent execution is required.
console.log(event); // prints ['bar'] [42]
}
// Unreachable here
Returns an AsyncIterator that iterates eventName events. It will throw
if the EventEmitter emits 'error'. It removes all listeners when
exiting the loop. The value returned by each iteration is an array
composed of the emitted event arguments.
An AbortSignal can be used to cancel waiting on events:
import { on, EventEmitter } from 'node:events';
import process from 'node:process';
const ac = new AbortController();
(async () => {
const ee = new EventEmitter();
// Emit later on
process.nextTick(() => {
ee.emit('foo', 'bar');
ee.emit('foo', 42);
});
for await (const event of on(ee, 'foo', { signal: ac.signal })) {
// The execution of this inner block is synchronous and it
// processes one event at a time (even with await). Do not use
// if concurrent execution is required.
console.log(event); // prints ['bar'] [42]
}
// Unreachable here
})();
process.nextTick(() => ac.abort());
The name of the event being listened for
Optional options: StaticEventEmitterOptionsthat iterates eventName events emitted by the emitter
v13.6.0, v12.16.0
Static onceCreates a Promise that is fulfilled when the EventEmitter emits the given
event or that is rejected if the EventEmitter emits 'error' while waiting.
The Promise will resolve with an array of all the arguments emitted to the
given event.
This method is intentionally generic and works with the web platform EventTarget interface, which has no special'error' event
semantics and does not listen to the 'error' event.
import { once, EventEmitter } from 'node:events';
import process from 'node:process';
const ee = new EventEmitter();
process.nextTick(() => {
ee.emit('myevent', 42);
});
const [value] = await once(ee, 'myevent');
console.log(value);
const err = new Error('kaboom');
process.nextTick(() => {
ee.emit('error', err);
});
try {
await once(ee, 'myevent');
} catch (err) {
console.error('error happened', err);
}
The special handling of the 'error' event is only used when events.once()is used to wait for another event. If events.once() is used to wait for the
'error' event itself, then it is treated as any other kind of event without
special handling:
import { EventEmitter, once } from 'node:events';
const ee = new EventEmitter();
once(ee, 'error')
.then(([err]) => console.log('ok', err.message))
.catch((err) => console.error('error', err.message));
ee.emit('error', new Error('boom'));
// Prints: ok boom
An AbortSignal can be used to cancel waiting for the event:
import { EventEmitter, once } from 'node:events';
const ee = new EventEmitter();
const ac = new AbortController();
async function foo(emitter, event, signal) {
try {
await once(emitter, event, { signal });
console.log('event emitted!');
} catch (error) {
if (error.name === 'AbortError') {
console.error('Waiting for the event was canceled!');
} else {
console.error('There was an error', error.message);
}
}
}
foo(ee, 'foo', ac.signal);
ac.abort(); // Abort waiting for the event
ee.emit('foo'); // Prints: Waiting for the event was canceled!
Optional options: StaticEventEmitterOptionsv11.13.0, v10.16.0
Optional options: StaticEventEmitterOptionsStatic setimport { setMaxListeners, EventEmitter } from 'node:events';
const target = new EventTarget();
const emitter = new EventEmitter();
setMaxListeners(5, target, emitter);
Optional n: numberA non-negative number. The maximum number of listeners per EventTarget event.
Rest ...eventTargets: (EventEmitter<DefaultEventMap> | _DOMEventTarget)[]v15.4.0
Generated using TypeDoc
The AggregationCursor class is an internal class that embodies an aggregation cursor on MongoDB allowing for iteration over the results returned from the underlying query. It supports one by one document iteration, conversion to an array or can be iterated as a Node 4.X or higher stream