Class FindCursor<TSchema>

Type Parameters

  • TSchema = any

Hierarchy (view full)

Properties

[asyncDispose]: (() => Promise<void>)

An alias for AbstractCursor.close|AbstractCursor.close().

captureRejections: boolean

Value: boolean

Change the default captureRejections option on all new EventEmitter objects.

v13.4.0, v12.16.0

captureRejectionSymbol: typeof captureRejectionSymbol

Value: Symbol.for('nodejs.rejection')

See how to write a custom rejection handler.

v13.4.0, v12.16.0

CLOSE: "close" = ...
defaultMaxListeners: number

By default, a maximum of 10 listeners can be registered for any single event. This limit can be changed for individual EventEmitter instances using the emitter.setMaxListeners(n) method. To change the default for allEventEmitter instances, the events.defaultMaxListeners property can be used. If this value is not a positive number, a RangeError is thrown.

Take caution when setting the events.defaultMaxListeners because the change affects all EventEmitter instances, including those created before the change is made. However, calling emitter.setMaxListeners(n) still has precedence over events.defaultMaxListeners.

This is not a hard limit. The EventEmitter instance will allow more listeners to be added but will output a trace warning to stderr indicating that a "possible EventEmitter memory leak" has been detected. For any single EventEmitter, the emitter.getMaxListeners() and emitter.setMaxListeners() methods can be used to temporarily avoid this warning:

import { EventEmitter } from 'node:events';
const emitter = new EventEmitter();
emitter.setMaxListeners(emitter.getMaxListeners() + 1);
emitter.once('event', () => {
// do stuff
emitter.setMaxListeners(Math.max(emitter.getMaxListeners() - 1, 0));
});

The --trace-warnings command-line flag can be used to display the stack trace for such warnings.

The emitted warning can be inspected with process.on('warning') and will have the additional emitter, type, and count properties, referring to the event emitter instance, the event's name and the number of attached listeners, respectively. Its name property is set to 'MaxListenersExceededWarning'.

v0.11.2

errorMonitor: typeof errorMonitor

This symbol shall be used to install a listener for only monitoring 'error' events. Listeners installed using this symbol are called before the regular 'error' listeners are called.

Installing a listener using this symbol does not change the behavior once an 'error' event is emitted. Therefore, the process will still crash if no regular 'error' listener is installed.

v13.6.0, v12.17.0

Accessors

  • get closed(): boolean
  • The cursor is closed and all remaining locally buffered documents have been iterated.

    Returns boolean

  • get id(): undefined | Long
  • The cursor has no id until it receives a response from the initial cursor creating command.

    It is non-zero for as long as the database has an open cursor.

    The initiating command may receive a zero id if the entire result is in the firstBatch.

    Returns undefined | Long

  • get killed(): boolean
  • A killCursors command was attempted on this cursor. This is performed if the cursor id is non zero.

    Returns boolean

Methods

  • Type Parameters

    • K

    Parameters

    • error: Error
    • event: string | symbol
    • Rest...args: AnyRest

    Returns void

  • Add a cursor flag to the cursor

    Parameters

    • flag:
          | "tailable"
          | "oplogReplay"
          | "noCursorTimeout"
          | "awaitData"
          | "partial"
          | "exhaust"

      The flag to set, must be one of following ['tailable', 'oplogReplay', 'noCursorTimeout', 'awaitData', 'partial' -.

    • value: boolean

      The flag boolean value.

    Returns this

  • Add a query modifier to the cursor query

    Parameters

    • name: string

      The query modifier (must start with $, such as $orderby etc)

    • value:
          | string
          | number
          | boolean
          | Document

      The modifier value.

    Returns this

  • Set the collation options for the cursor.

    Parameters

    • value: CollationOptions

      The cursor collation options (MongoDB 3.4 or higher) settings for update operation (see 3.4 documentation for available fields).

    Returns this

  • Add a comment to the cursor query allowing for tracking the comment in the log.

    Parameters

    • value: string

      The comment attached to this query.

    Returns this

  • Get the count of documents for this cursor

    Parameters

    Returns Promise<number>

    Use collection.estimatedDocumentCount or collection.countDocuments instead

  • Synchronously calls each of the listeners registered for the event named eventName, in the order they were registered, passing the supplied arguments to each.

    Returns true if the event had listeners, false otherwise.

    import { EventEmitter } from 'node:events';
    const myEmitter = new EventEmitter();

    // First listener
    myEmitter.on('event', function firstListener() {
    console.log('Helloooo! first listener');
    });
    // Second listener
    myEmitter.on('event', function secondListener(arg1, arg2) {
    console.log(`event with parameters ${arg1}, ${arg2} in second listener`);
    });
    // Third listener
    myEmitter.on('event', function thirdListener(...args) {
    const parameters = args.join(', ');
    console.log(`event with parameters ${parameters} in third listener`);
    });

    console.log(myEmitter.listeners('event'));

    myEmitter.emit('event', 1, 2, 3, 4, 5);

    // Prints:
    // [
    // [Function: firstListener],
    // [Function: secondListener],
    // [Function: thirdListener]
    // ]
    // Helloooo! first listener
    // event with parameters 1, 2 in second listener
    // event with parameters 1, 2, 3, 4, 5 in third listener

    Type Parameters

    • EventKey extends "close"

    Parameters

    Returns boolean

    v0.1.26

  • Returns an array listing the events for which the emitter has registered listeners. The values in the array are strings or Symbols.

    import { EventEmitter } from 'node:events';

    const myEE = new EventEmitter();
    myEE.on('foo', () => {});
    myEE.on('bar', () => {});

    const sym = Symbol('symbol');
    myEE.on(sym, () => {});

    console.log(myEE.eventNames());
    // Prints: [ 'foo', 'bar', Symbol(symbol) ]

    Returns string[]

    v6.0.0

  • Iterates over all the documents for this cursor using the iterator, callback pattern.

    If the iterator returns false, iteration will stop.

    Parameters

    • iterator: ((doc: TSchema) => boolean | void)

      The iteration callback.

        • (doc): boolean | void
        • Parameters

          Returns boolean | void

    Returns Promise<void>

    • Will be removed in a future release. Use for await...of instead.
  • Set the cursor hint

    Parameters

    • hint: Hint

      If specified, then the query system will only consider plans using the hinted index.

    Returns this

  • Set the limit for the cursor.

    Parameters

    • value: number

      The limit for the cursor query.

    Returns this

  • Returns the number of listeners listening for the event named eventName. If listener is provided, it will return how many times the listener is found in the list of the listeners of the event.

    Type Parameters

    • EventKey extends "close"

    Parameters

    Returns number

    v3.2.0

  • Map all documents using the provided function If there is a transform set on the cursor, that will be called first and the result passed to this function's transform.

    Type Parameters

    • T

    Parameters

    • transform: ((doc: TSchema) => T)

      The mapping transformation method.

    Returns FindCursor<T>

    Note Cursors use null internally to indicate that there are no more documents in the cursor. Providing a mapping function that maps values to null will result in the cursor closing itself before it has finished iterating all documents. This will not result in a memory leak, just surprising behavior. For example:

    const cursor = collection.find({});
    cursor.map(() => null);

    const documents = await cursor.toArray();
    // documents is always [], regardless of how many documents are in the collection.

    Other falsey values are allowed:

    const cursor = collection.find({});
    cursor.map(() => '');

    const documents = await cursor.toArray();
    // documents is now an array of empty strings

    Note for Typescript Users: adding a transform changes the return type of the iteration of this cursor, it does not return a new instance of a cursor. This means when calling map, you should always assign the result to a new variable in order to get a correctly typed cursor variable. Take note of the following example:

    const cursor: FindCursor<Document> = coll.find();
    const mappedCursor: FindCursor<number> = cursor.map(doc => Object.keys(doc).length);
    const keyCounts: number[] = await mappedCursor.toArray(); // cursor.toArray() still returns Document[]
  • Set the cursor max

    Parameters

    • max: Document

      Specify a $max value to specify the exclusive upper bound for a specific index in order to constrain the results of find(). The $max specifies the upper bound for all keys of a specific index in order.

    Returns this

  • Set a maxAwaitTimeMS on a tailing cursor query to allow to customize the timeout value for the option awaitData (Only supported on MongoDB 3.2 or higher, ignored otherwise)

    Parameters

    • value: number

      Number of milliseconds to wait before aborting the tailed query.

    Returns this

  • Set a maxTimeMS on the cursor query, allowing for hard timeout limits on queries (Only supported on MongoDB 2.6 or higher)

    Parameters

    • value: number

      Number of milliseconds to wait before aborting the query.

    Returns this

  • Set the cursor min

    Parameters

    • min: Document

      Specify a $min value to specify the inclusive lower bound for a specific index in order to constrain the results of find(). The $min specifies the lower bound for all keys of a specific index in order.

    Returns this

  • Adds the listener function to the end of the listeners array for the event named eventName. No checks are made to see if the listener has already been added. Multiple calls passing the same combination of eventName and listener will result in the listener being added, and called, multiple times.

    server.on('connection', (stream) => {
    console.log('someone connected!');
    });

    Returns a reference to the EventEmitter, so that calls can be chained.

    By default, event listeners are invoked in the order they are added. The emitter.prependListener() method can be used as an alternative to add the event listener to the beginning of the listeners array.

    import { EventEmitter } from 'node:events';
    const myEE = new EventEmitter();
    myEE.on('foo', () => console.log('a'));
    myEE.prependListener('foo', () => console.log('b'));
    myEE.emit('foo');
    // Prints:
    // b
    // a

    Type Parameters

    • EventKey extends "close"

    Parameters

    Returns this

    v0.1.101

  • Adds the listener function to the end of the listeners array for the event named eventName. No checks are made to see if the listener has already been added. Multiple calls passing the same combination of eventName and listener will result in the listener being added, and called, multiple times.

    server.on('connection', (stream) => {
    console.log('someone connected!');
    });

    Returns a reference to the EventEmitter, so that calls can be chained.

    By default, event listeners are invoked in the order they are added. The emitter.prependListener() method can be used as an alternative to add the event listener to the beginning of the listeners array.

    import { EventEmitter } from 'node:events';
    const myEE = new EventEmitter();
    myEE.on('foo', () => console.log('a'));
    myEE.prependListener('foo', () => console.log('b'));
    myEE.emit('foo');
    // Prints:
    // b
    // a

    Parameters

    • event: CommonEvents
    • listener: ((eventName: string | symbol, listener: GenericListener) => void)

      The callback function

        • (eventName, listener): void
        • Parameters

          Returns void

    Returns this

    v0.1.101

  • Adds the listener function to the end of the listeners array for the event named eventName. No checks are made to see if the listener has already been added. Multiple calls passing the same combination of eventName and listener will result in the listener being added, and called, multiple times.

    server.on('connection', (stream) => {
    console.log('someone connected!');
    });

    Returns a reference to the EventEmitter, so that calls can be chained.

    By default, event listeners are invoked in the order they are added. The emitter.prependListener() method can be used as an alternative to add the event listener to the beginning of the listeners array.

    import { EventEmitter } from 'node:events';
    const myEE = new EventEmitter();
    myEE.on('foo', () => console.log('a'));
    myEE.prependListener('foo', () => console.log('b'));
    myEE.emit('foo');
    // Prints:
    // b
    // a

    Parameters

    Returns this

    v0.1.101

  • Adds a one-time listener function for the event named eventName. The next time eventName is triggered, this listener is removed and then invoked.

    server.once('connection', (stream) => {
    console.log('Ah, we have our first user!');
    });

    Returns a reference to the EventEmitter, so that calls can be chained.

    By default, event listeners are invoked in the order they are added. The emitter.prependOnceListener() method can be used as an alternative to add the event listener to the beginning of the listeners array.

    import { EventEmitter } from 'node:events';
    const myEE = new EventEmitter();
    myEE.once('foo', () => console.log('a'));
    myEE.prependOnceListener('foo', () => console.log('b'));
    myEE.emit('foo');
    // Prints:
    // b
    // a

    Type Parameters

    • EventKey extends "close"

    Parameters

    Returns this

    v0.3.0

  • Adds a one-time listener function for the event named eventName. The next time eventName is triggered, this listener is removed and then invoked.

    server.once('connection', (stream) => {
    console.log('Ah, we have our first user!');
    });

    Returns a reference to the EventEmitter, so that calls can be chained.

    By default, event listeners are invoked in the order they are added. The emitter.prependOnceListener() method can be used as an alternative to add the event listener to the beginning of the listeners array.

    import { EventEmitter } from 'node:events';
    const myEE = new EventEmitter();
    myEE.once('foo', () => console.log('a'));
    myEE.prependOnceListener('foo', () => console.log('b'));
    myEE.emit('foo');
    // Prints:
    // b
    // a

    Parameters

    • event: CommonEvents
    • listener: ((eventName: string | symbol, listener: GenericListener) => void)

      The callback function

        • (eventName, listener): void
        • Parameters

          Returns void

    Returns this

    v0.3.0

  • Adds a one-time listener function for the event named eventName. The next time eventName is triggered, this listener is removed and then invoked.

    server.once('connection', (stream) => {
    console.log('Ah, we have our first user!');
    });

    Returns a reference to the EventEmitter, so that calls can be chained.

    By default, event listeners are invoked in the order they are added. The emitter.prependOnceListener() method can be used as an alternative to add the event listener to the beginning of the listeners array.

    import { EventEmitter } from 'node:events';
    const myEE = new EventEmitter();
    myEE.once('foo', () => console.log('a'));
    myEE.prependOnceListener('foo', () => console.log('b'));
    myEE.emit('foo');
    // Prints:
    // b
    // a

    Parameters

    Returns this

    v0.3.0

  • Adds the listener function to the beginning of the listeners array for the event named eventName. No checks are made to see if the listener has already been added. Multiple calls passing the same combination of eventName and listener will result in the listener being added, and called, multiple times.

    server.prependListener('connection', (stream) => {
    console.log('someone connected!');
    });

    Returns a reference to the EventEmitter, so that calls can be chained.

    Type Parameters

    • EventKey extends "close"

    Parameters

    Returns this

    v6.0.0

  • Adds the listener function to the beginning of the listeners array for the event named eventName. No checks are made to see if the listener has already been added. Multiple calls passing the same combination of eventName and listener will result in the listener being added, and called, multiple times.

    server.prependListener('connection', (stream) => {
    console.log('someone connected!');
    });

    Returns a reference to the EventEmitter, so that calls can be chained.

    Parameters

    • event: CommonEvents
    • listener: ((eventName: string | symbol, listener: GenericListener) => void)

      The callback function

        • (eventName, listener): void
        • Parameters

          Returns void

    Returns this

    v6.0.0

  • Adds the listener function to the beginning of the listeners array for the event named eventName. No checks are made to see if the listener has already been added. Multiple calls passing the same combination of eventName and listener will result in the listener being added, and called, multiple times.

    server.prependListener('connection', (stream) => {
    console.log('someone connected!');
    });

    Returns a reference to the EventEmitter, so that calls can be chained.

    Parameters

    Returns this

    v6.0.0

  • Adds a one-timelistener function for the event named eventName to the beginning of the listeners array. The next time eventName is triggered, this listener is removed, and then invoked.

    server.prependOnceListener('connection', (stream) => {
    console.log('Ah, we have our first user!');
    });

    Returns a reference to the EventEmitter, so that calls can be chained.

    Type Parameters

    • EventKey extends "close"

    Parameters

    Returns this

    v6.0.0

  • Adds a one-timelistener function for the event named eventName to the beginning of the listeners array. The next time eventName is triggered, this listener is removed, and then invoked.

    server.prependOnceListener('connection', (stream) => {
    console.log('Ah, we have our first user!');
    });

    Returns a reference to the EventEmitter, so that calls can be chained.

    Parameters

    • event: CommonEvents
    • listener: ((eventName: string | symbol, listener: GenericListener) => void)

      The callback function

        • (eventName, listener): void
        • Parameters

          Returns void

    Returns this

    v6.0.0

  • Adds a one-timelistener function for the event named eventName to the beginning of the listeners array. The next time eventName is triggered, this listener is removed, and then invoked.

    server.prependOnceListener('connection', (stream) => {
    console.log('Ah, we have our first user!');
    });

    Returns a reference to the EventEmitter, so that calls can be chained.

    Parameters

    Returns this

    v6.0.0

  • Add a project stage to the aggregation pipeline

    Type Parameters

    Parameters

    Returns FindCursor<T>

    In order to strictly type this function you must provide an interface that represents the effect of your projection on the result documents.

    By default chaining a projection to your cursor changes the returned type to the generic Document type. You should specify a parameterized type to have assertions on your final results.

    // Best way
    const docs: FindCursor<{ a: number }> = cursor.project<{ a: number }>({ _id: 0, a: true });
    // Flexible way
    const docs: FindCursor<Document> = cursor.project({ _id: 0, a: true });
    const cursor: FindCursor<{ a: number; b: string }> = coll.find();
    const projectCursor = cursor.project<{ a: number }>({ _id: 0, a: true });
    const aPropOnlyArray: {a: number}[] = await projectCursor.toArray();

    // or always use chaining and save the final cursor

    const cursor = coll.find().project<{ a: string }>({
    _id: 0,
    a: { $convert: { input: '$a', to: 'string' }
    }});
  • Returns a copy of the array of listeners for the event named eventName, including any wrappers (such as those created by .once()).

    import { EventEmitter } from 'node:events';
    const emitter = new EventEmitter();
    emitter.once('log', () => console.log('log once'));

    // Returns a new Array with a function `onceWrapper` which has a property
    // `listener` which contains the original listener bound above
    const listeners = emitter.rawListeners('log');
    const logFnWrapper = listeners[0];

    // Logs "log once" to the console and does not unbind the `once` event
    logFnWrapper.listener();

    // Logs "log once" to the console and removes the listener
    logFnWrapper();

    emitter.on('log', () => console.log('log persistently'));
    // Will return a new Array with a single function bound by `.on()` above
    const newListeners = emitter.rawListeners('log');

    // Logs "log persistently" twice
    newListeners[0]();
    emitter.emit('log');

    Type Parameters

    • EventKey extends "close"

    Parameters

    Returns AbstractCursorEvents[EventKey][]

    v9.4.0

  • Removes all listeners, or those of the specified eventName.

    It is bad practice to remove listeners added elsewhere in the code, particularly when the EventEmitter instance was created by some other component or module (e.g. sockets or file streams).

    Returns a reference to the EventEmitter, so that calls can be chained.

    Type Parameters

    • EventKey extends "close"

    Parameters

    • Optionalevent: string | symbol | EventKey

    Returns this

    v0.1.26

  • Removes the specified listener from the listener array for the event named eventName.

    const callback = (stream) => {
    console.log('someone connected!');
    };
    server.on('connection', callback);
    // ...
    server.removeListener('connection', callback);

    removeListener() will remove, at most, one instance of a listener from the listener array. If any single listener has been added multiple times to the listener array for the specified eventName, then removeListener() must be called multiple times to remove each instance.

    Once an event is emitted, all listeners attached to it at the time of emitting are called in order. This implies that any removeListener() or removeAllListeners() calls after emitting and before the last listener finishes execution will not remove them fromemit() in progress. Subsequent events behave as expected.

    import { EventEmitter } from 'node:events';
    class MyEmitter extends EventEmitter {}
    const myEmitter = new MyEmitter();

    const callbackA = () => {
    console.log('A');
    myEmitter.removeListener('event', callbackB);
    };

    const callbackB = () => {
    console.log('B');
    };

    myEmitter.on('event', callbackA);

    myEmitter.on('event', callbackB);

    // callbackA removes listener callbackB but it will still be called.
    // Internal listener array at time of emit [callbackA, callbackB]
    myEmitter.emit('event');
    // Prints:
    // A
    // B

    // callbackB is now removed.
    // Internal listener array [callbackA]
    myEmitter.emit('event');
    // Prints:
    // A

    Because listeners are managed using an internal array, calling this will change the position indices of any listener registered after the listener being removed. This will not impact the order in which listeners are called, but it means that any copies of the listener array as returned by the emitter.listeners() method will need to be recreated.

    When a single function has been added as a handler multiple times for a single event (as in the example below), removeListener() will remove the most recently added instance. In the example the once('ping') listener is removed:

    import { EventEmitter } from 'node:events';
    const ee = new EventEmitter();

    function pong() {
    console.log('pong');
    }

    ee.on('ping', pong);
    ee.once('ping', pong);
    ee.removeListener('ping', pong);

    ee.emit('ping');
    ee.emit('ping');

    Returns a reference to the EventEmitter, so that calls can be chained.

    Type Parameters

    • EventKey extends "close"

    Parameters

    Returns this

    v0.1.26

  • Removes the specified listener from the listener array for the event named eventName.

    const callback = (stream) => {
    console.log('someone connected!');
    };
    server.on('connection', callback);
    // ...
    server.removeListener('connection', callback);

    removeListener() will remove, at most, one instance of a listener from the listener array. If any single listener has been added multiple times to the listener array for the specified eventName, then removeListener() must be called multiple times to remove each instance.

    Once an event is emitted, all listeners attached to it at the time of emitting are called in order. This implies that any removeListener() or removeAllListeners() calls after emitting and before the last listener finishes execution will not remove them fromemit() in progress. Subsequent events behave as expected.

    import { EventEmitter } from 'node:events';
    class MyEmitter extends EventEmitter {}
    const myEmitter = new MyEmitter();

    const callbackA = () => {
    console.log('A');
    myEmitter.removeListener('event', callbackB);
    };

    const callbackB = () => {
    console.log('B');
    };

    myEmitter.on('event', callbackA);

    myEmitter.on('event', callbackB);

    // callbackA removes listener callbackB but it will still be called.
    // Internal listener array at time of emit [callbackA, callbackB]
    myEmitter.emit('event');
    // Prints:
    // A
    // B

    // callbackB is now removed.
    // Internal listener array [callbackA]
    myEmitter.emit('event');
    // Prints:
    // A

    Because listeners are managed using an internal array, calling this will change the position indices of any listener registered after the listener being removed. This will not impact the order in which listeners are called, but it means that any copies of the listener array as returned by the emitter.listeners() method will need to be recreated.

    When a single function has been added as a handler multiple times for a single event (as in the example below), removeListener() will remove the most recently added instance. In the example the once('ping') listener is removed:

    import { EventEmitter } from 'node:events';
    const ee = new EventEmitter();

    function pong() {
    console.log('pong');
    }

    ee.on('ping', pong);
    ee.once('ping', pong);
    ee.removeListener('ping', pong);

    ee.emit('ping');
    ee.emit('ping');

    Returns a reference to the EventEmitter, so that calls can be chained.

    Parameters

    Returns this

    v0.1.26

  • Removes the specified listener from the listener array for the event named eventName.

    const callback = (stream) => {
    console.log('someone connected!');
    };
    server.on('connection', callback);
    // ...
    server.removeListener('connection', callback);

    removeListener() will remove, at most, one instance of a listener from the listener array. If any single listener has been added multiple times to the listener array for the specified eventName, then removeListener() must be called multiple times to remove each instance.

    Once an event is emitted, all listeners attached to it at the time of emitting are called in order. This implies that any removeListener() or removeAllListeners() calls after emitting and before the last listener finishes execution will not remove them fromemit() in progress. Subsequent events behave as expected.

    import { EventEmitter } from 'node:events';
    class MyEmitter extends EventEmitter {}
    const myEmitter = new MyEmitter();

    const callbackA = () => {
    console.log('A');
    myEmitter.removeListener('event', callbackB);
    };

    const callbackB = () => {
    console.log('B');
    };

    myEmitter.on('event', callbackA);

    myEmitter.on('event', callbackB);

    // callbackA removes listener callbackB but it will still be called.
    // Internal listener array at time of emit [callbackA, callbackB]
    myEmitter.emit('event');
    // Prints:
    // A
    // B

    // callbackB is now removed.
    // Internal listener array [callbackA]
    myEmitter.emit('event');
    // Prints:
    // A

    Because listeners are managed using an internal array, calling this will change the position indices of any listener registered after the listener being removed. This will not impact the order in which listeners are called, but it means that any copies of the listener array as returned by the emitter.listeners() method will need to be recreated.

    When a single function has been added as a handler multiple times for a single event (as in the example below), removeListener() will remove the most recently added instance. In the example the once('ping') listener is removed:

    import { EventEmitter } from 'node:events';
    const ee = new EventEmitter();

    function pong() {
    console.log('pong');
    }

    ee.on('ping', pong);
    ee.once('ping', pong);
    ee.removeListener('ping', pong);

    ee.emit('ping');
    ee.emit('ping');

    Returns a reference to the EventEmitter, so that calls can be chained.

    Parameters

    Returns this

    v0.1.26

  • Set the cursor returnKey. If set to true, modifies the cursor to only return the index field or fields for the results of the query, rather than documents. If set to true and the query does not use an index to perform the read operation, the returned documents will not contain any fields.

    Parameters

    • value: boolean

      the returnKey value.

    Returns this

  • Rewind this cursor to its uninitialized state. Any options that are present on the cursor will remain in effect. Iterating this cursor will cause new queries to be sent to the server, even if the resultant data has already been retrieved by this cursor.

    Returns void

  • By default EventEmitters will print a warning if more than 10 listeners are added for a particular event. This is a useful default that helps finding memory leaks. The emitter.setMaxListeners() method allows the limit to be modified for this specific EventEmitter instance. The value can be set to Infinity (or 0) to indicate an unlimited number of listeners.

    Returns a reference to the EventEmitter, so that calls can be chained.

    Parameters

    • n: number

    Returns this

    v0.3.5

  • Modifies the output of a query by adding a field $recordId to matching documents. $recordId is the internal key which uniquely identifies a document in a collection.

    Parameters

    • value: boolean

      The $showDiskLoc option has now been deprecated and replaced with the showRecordId field. $showDiskLoc will still be accepted for OP_QUERY stye find.

    Returns this

  • Set the skip for the cursor.

    Parameters

    • value: number

      The skip for the cursor query.

    Returns this

  • Sets the sort order of the cursor query.

    Parameters

    • sort: Sort

      The key or keys set for the sort.

    • Optionaldirection: SortDirection

      The direction of the sorting (1 or -1).

    Returns this

  • Returns an array of documents. The caller is responsible for making sure that there is enough memory to store the results. Note that the array only contains partial results when this cursor had been previously accessed. In that case, cursor.rewind() can be used to reset the cursor.

    Returns Promise<TSchema[]>

  • Experimental

    Listens once to the abort event on the provided signal.

    Listening to the abort event on abort signals is unsafe and may lead to resource leaks since another third party with the signal can call e.stopImmediatePropagation(). Unfortunately Node.js cannot change this since it would violate the web standard. Additionally, the original API makes it easy to forget to remove listeners.

    This API allows safely using AbortSignals in Node.js APIs by solving these two issues by listening to the event such that stopImmediatePropagation does not prevent the listener from running.

    Returns a disposable so that it may be unsubscribed from more easily.

    import { addAbortListener } from 'node:events';

    function example(signal) {
    let disposable;
    try {
    signal.addEventListener('abort', (e) => e.stopImmediatePropagation());
    disposable = addAbortListener(signal, (e) => {
    // Do something when signal is aborted.
    });
    } finally {
    disposable?.[Symbol.dispose]();
    }
    }

    Parameters

    • signal: AbortSignal
    • resource: ((event: Event) => void)
        • (event): void
        • Parameters

          • event: Event

          Returns void

    Returns Disposable

    Disposable that removes the abort listener.

    v20.5.0

  • Returns a copy of the array of listeners for the event named eventName.

    For EventEmitters this behaves exactly the same as calling .listeners on the emitter.

    For EventTargets this is the only way to get the event listeners for the event target. This is useful for debugging and diagnostic purposes.

    import { getEventListeners, EventEmitter } from 'node:events';

    {
    const ee = new EventEmitter();
    const listener = () => console.log('Events are fun');
    ee.on('foo', listener);
    console.log(getEventListeners(ee, 'foo')); // [ [Function: listener] ]
    }
    {
    const et = new EventTarget();
    const listener = () => console.log('Events are fun');
    et.addEventListener('foo', listener);
    console.log(getEventListeners(et, 'foo')); // [ [Function: listener] ]
    }

    Parameters

    • emitter: EventEmitter<DefaultEventMap> | EventTarget
    • name: string | symbol

    Returns Function[]

    v15.2.0, v14.17.0

  • Returns the currently set max amount of listeners.

    For EventEmitters this behaves exactly the same as calling .getMaxListeners on the emitter.

    For EventTargets this is the only way to get the max event listeners for the event target. If the number of event handlers on a single EventTarget exceeds the max set, the EventTarget will print a warning.

    import { getMaxListeners, setMaxListeners, EventEmitter } from 'node:events';

    {
    const ee = new EventEmitter();
    console.log(getMaxListeners(ee)); // 10
    setMaxListeners(11, ee);
    console.log(getMaxListeners(ee)); // 11
    }
    {
    const et = new EventTarget();
    console.log(getMaxListeners(et)); // 10
    setMaxListeners(11, et);
    console.log(getMaxListeners(et)); // 11
    }

    Parameters

    • emitter: EventEmitter<DefaultEventMap> | EventTarget

    Returns number

    v19.9.0

  • A class method that returns the number of listeners for the given eventName registered on the given emitter.

    import { EventEmitter, listenerCount } from 'node:events';

    const myEmitter = new EventEmitter();
    myEmitter.on('event', () => {});
    myEmitter.on('event', () => {});
    console.log(listenerCount(myEmitter, 'event'));
    // Prints: 2

    Parameters

    • emitter: EventEmitter<DefaultEventMap>

      The emitter to query

    • eventName: string | symbol

      The event name

    Returns number

    v0.9.12

    Since v3.2.0 - Use listenerCount instead.

  • import { on, EventEmitter } from 'node:events';
    import process from 'node:process';

    const ee = new EventEmitter();

    // Emit later on
    process.nextTick(() => {
    ee.emit('foo', 'bar');
    ee.emit('foo', 42);
    });

    for await (const event of on(ee, 'foo')) {
    // The execution of this inner block is synchronous and it
    // processes one event at a time (even with await). Do not use
    // if concurrent execution is required.
    console.log(event); // prints ['bar'] [42]
    }
    // Unreachable here

    Returns an AsyncIterator that iterates eventName events. It will throw if the EventEmitter emits 'error'. It removes all listeners when exiting the loop. The value returned by each iteration is an array composed of the emitted event arguments.

    An AbortSignal can be used to cancel waiting on events:

    import { on, EventEmitter } from 'node:events';
    import process from 'node:process';

    const ac = new AbortController();

    (async () => {
    const ee = new EventEmitter();

    // Emit later on
    process.nextTick(() => {
    ee.emit('foo', 'bar');
    ee.emit('foo', 42);
    });

    for await (const event of on(ee, 'foo', { signal: ac.signal })) {
    // The execution of this inner block is synchronous and it
    // processes one event at a time (even with await). Do not use
    // if concurrent execution is required.
    console.log(event); // prints ['bar'] [42]
    }
    // Unreachable here
    })();

    process.nextTick(() => ac.abort());

    Use the close option to specify an array of event names that will end the iteration:

    import { on, EventEmitter } from 'node:events';
    import process from 'node:process';

    const ee = new EventEmitter();

    // Emit later on
    process.nextTick(() => {
    ee.emit('foo', 'bar');
    ee.emit('foo', 42);
    ee.emit('close');
    });

    for await (const event of on(ee, 'foo', { close: ['close'] })) {
    console.log(event); // prints ['bar'] [42]
    }
    // the loop will exit after 'close' is emitted
    console.log('done'); // prints 'done'

    Parameters

    • emitter: EventEmitter<DefaultEventMap>
    • eventName: string | symbol
    • Optionaloptions: StaticEventEmitterIteratorOptions

    Returns AsyncIterableIterator<any[]>

    An AsyncIterator that iterates eventName events emitted by the emitter

    v13.6.0, v12.16.0

  • Parameters

    • emitter: EventTarget
    • eventName: string
    • Optionaloptions: StaticEventEmitterIteratorOptions

    Returns AsyncIterableIterator<any[]>

  • Creates a Promise that is fulfilled when the EventEmitter emits the given event or that is rejected if the EventEmitter emits 'error' while waiting. The Promise will resolve with an array of all the arguments emitted to the given event.

    This method is intentionally generic and works with the web platform EventTarget interface, which has no special'error' event semantics and does not listen to the 'error' event.

    import { once, EventEmitter } from 'node:events';
    import process from 'node:process';

    const ee = new EventEmitter();

    process.nextTick(() => {
    ee.emit('myevent', 42);
    });

    const [value] = await once(ee, 'myevent');
    console.log(value);

    const err = new Error('kaboom');
    process.nextTick(() => {
    ee.emit('error', err);
    });

    try {
    await once(ee, 'myevent');
    } catch (err) {
    console.error('error happened', err);
    }

    The special handling of the 'error' event is only used when events.once() is used to wait for another event. If events.once() is used to wait for the 'error' event itself, then it is treated as any other kind of event without special handling:

    import { EventEmitter, once } from 'node:events';

    const ee = new EventEmitter();

    once(ee, 'error')
    .then(([err]) => console.log('ok', err.message))
    .catch((err) => console.error('error', err.message));

    ee.emit('error', new Error('boom'));

    // Prints: ok boom

    An AbortSignal can be used to cancel waiting for the event:

    import { EventEmitter, once } from 'node:events';

    const ee = new EventEmitter();
    const ac = new AbortController();

    async function foo(emitter, event, signal) {
    try {
    await once(emitter, event, { signal });
    console.log('event emitted!');
    } catch (error) {
    if (error.name === 'AbortError') {
    console.error('Waiting for the event was canceled!');
    } else {
    console.error('There was an error', error.message);
    }
    }
    }

    foo(ee, 'foo', ac.signal);
    ac.abort(); // Abort waiting for the event
    ee.emit('foo'); // Prints: Waiting for the event was canceled!

    Parameters

    • emitter: EventEmitter<DefaultEventMap>
    • eventName: string | symbol
    • Optionaloptions: StaticEventEmitterOptions

    Returns Promise<any[]>

    v11.13.0, v10.16.0

  • Parameters

    • emitter: EventTarget
    • eventName: string
    • Optionaloptions: StaticEventEmitterOptions

    Returns Promise<any[]>

  • import { setMaxListeners, EventEmitter } from 'node:events';

    const target = new EventTarget();
    const emitter = new EventEmitter();

    setMaxListeners(5, target, emitter);

    Parameters

    • Optionaln: number

      A non-negative number. The maximum number of listeners per EventTarget event.

    • Rest...eventTargets: (EventEmitter<DefaultEventMap> | EventTarget)[]

    Returns void

    v15.4.0